1 11/16" Tubing | McMaster-Carr

These short glass tubes can be used as glass bowls in oil dispensers. Borosilicate glass resists clouding and pitting and is highly chemical resistant. With a low rate of thermal expansion, it stays dimensionally stable during changes in temperature.

								Temp.
	OD	ID	Wall Thk.	Lg.	Lg. Tolerance	Edge Fabrication	Max. Pressure, psi	Min.	Max., ° F	Color		Each
Annealed



		2"	1 11/16"	5/32"	1 7/8"	-0.031" to 0.031"	Ground	110	Not Rated	185	Clear	1176K24	000000

Strut Channel Routing Clamps


Clamp Shown Installed	Style 1	Style 2

Run pipe, conduit, and tubing through your facility by attaching it to strut channel. Since you don’t have to drill into beams and walls, it's easy to reconfigure setups as needed. Just slide clamps into the end of channel and tighten the screw.

Style 2—The screw is angled for easy access with a screwdriver or drill where pipe, conduit, and tubing run in parallel.

Zinc-Plated Steel—Strong and durable with a zinc plating that protects from occasional exposure to moisture.

Copper-Plated Steel—Shield copper pipe and tubing from galvanic corrosion that other metal routing clamps can cause. These also prevent scratches to pipe and resist rust in wet environments.

304 Stainless Steel—The choice for wet and outdoor environments, these resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

PVC-Coated Steel—With a layer of PVC, these won't wear or cut into PVC-coated conduit and tubing. This keeps the coating intact to prevent rust and extend the life of conduit in high-vibration environments.

	ID
	Inch	Metric, mm	For Pipe Size	For Channel Wd.	Lg.	Wd.	Ht.	Thk.	Wt. Cap., lb.	Specs. Met		Each
Style 1







				Zinc-Plated Steel

				1 11/16"	43	1 1/2	1 5/8"	1 7/8"	1 1/4"	3 5/16"	7/64"	800	—	3115T85	00000




						Copper-Plated Steel

						1 11/16"	42	1 1/4	1 5/8"	1 13/16"	1 1/4"	3 3/16"	5/64"	600	—	3115T532	0000




								304 Stainless Steel

								1 11/16"	42	1 1/4	1 5/8"	1 15/16"	1 1/4"	3 5/16"	7/64"	800	—	3115T011	00000




										316 Stainless Steel

										1 11/16"	42	1 1/4	1 5/8"	1 15/16"	1 1/4"	3 5/16"	7/64"	800	—	3115T038	00000




												PVC-Coated Steel

												1 11/16"	43	1 1/2	1 5/8"	1 7/8"	1 1/4"	3 5/16"	7/64"	800	—	3115T75	0000


												Style 2







																Zinc-Plated Steel

																1 11/16"	43	1 1/4	1 5/8"	1 15/16"	1 1/4"	3 1/2"	5/64"	500	C-UL Listed, UL Listed	3979T17	0000

Standoff Strut Channel Routing Clamps


Parallel-Mounted Clamp Shown Installed	Perpendicular-Mounted Clamp Shown Installed	Parallel Mount	Perpendicular Mount

Hold pipe and conduit away from strut channel so components don’t rub and wear. The extra clearance also permits airflow, which prevents condensation build-up and heat transfer from hot pipes to your channel. Slide clamps into the end of channel and tighten the screw.

Zinc-Plated Steel—Strong and durable with a zinc plating that protects from occasional exposure to moisture.

	ID
	Inch	Metric, mm	For Pipe Size	For Channel Wd.	Lg.	Wd.	Ht.	Ctr. Ht.	Thk.	Wt. Cap.		Each
Zinc-Plated Steel







				Parallel Mount

				1 11/16"	43	1 1/4	1 5/8"	1 1/4"	1 13/16"	4 3/8"	2 1/2"	5/64"	Not Rated	3193T15	00000




						Perpendicular Mount

						1 11/16"	42	1 1/4	1 5/8"	2 13/16"	1 1/4"	3 13/16"	1 11/16"	7/64"	70 lb.	3571T15	00000

Vibration-Damping Strut Channel Routing Clamps

Image of Product. Front orientation. Contains Annotated, Inset. Strut Channel Framing and Fittings. Vibration-Damping Strut Channel Routing Clamps.

Absorb shock and muffle noise from rattling pipes. The cushion inside these clamps reduces vibration to extend the life of your pipe, tubing, and conduit. Slide clamps into your strut channel and tighten the nut to secure. Since you don’t have to drill into beams and walls, it's easy to reconfigure setups as needed.

Zinc-Plated Steel—The zinc plating protects these clamps from occasional exposure to moisture.

304 Stainless Steel and 316 Stainless Steel—The choice for wet environments, these clamps resist rust.

Flammability Rating—UL 2043 certified to generate minimal smoke in the event of a fire. These are a good choice for spaces that could spread smoke through your HVAC system, such as air intakes and ducts.

	ID
	Inch	Metric, mm	For Pipe Size	For Channel Wd.	Lg.	Wd.	Ht.	Ctr. Ht.	Thk.	Wt. Cap.	Temp., ° F	Flammability Rating		Each
Zinc-Plated Steel with TPE Cushion



		1 11/16"	43	1 1/4	1 5/8"	2 3/16"	1 1/4"	3 7/16"	1"	7/64"	Not Rated	-50 to 270	—	32625T21	00000


		304 Stainless Steel with TPE Cushion



				1 11/16"	43	1 1/4	1 5/8"	2 3/16"	1 1/4"	3 7/16"	1"	7/64"	Not Rated	-50 to 270	—	32625T25	00000


				316 Stainless Steel with TPE Cushion



						1 11/16"	43	1 1/4	1 5/8"	2 1/2"	1 1/4"	3 11/16"	1 1/16"	1/8"	Not Rated	-50 to 270	UL 2043	32625T132	00000

Block-Style Vibration-Damping Strut Channel Routing Clamps


	Clamp Shown with Stacking Clamp (Sold Separately)

Reduce vibration and noise in pressurized systems, such as hydraulic lines. The polypropylene body on these clamps tightly surrounds pipe and tubing. Slide clamps into channel and fasten the included nuts and bolts to secure.

Zinc-Plated Steel Top Plate—The plate is strong and durable with a zinc finish that protects it from occasional exposure to moisture.

316 Stainless Steel Top Plate—The plate withstands harsh weather, salt water, and most chemicals.

Stacking Clamps—Route multiple lines of similar size on top of each other. These clamps include a plate and fasteners for mounting to strut channel clamps or other stacking clamps. They can't be used on their own.

	Routing Clamps													Stacking Clamps
	ID
	Inch	Metric, mm	For Pipe Size	For Channel Wd.	Lg.	Wd.	Ht.	Ctr. Ht.	Wt. Cap.	For Max. Pressure, psi	Temp., ° F		Each		Each
Polypropylene with Zinc-Plated Steel Top Plate



		1 11/16"	43	1 1/4	1 5/8"	2 13/16"	1 3/16"	2 15/16"	1 1/8"	Not Rated	2,000	-20 to 190	1819T27	000000	3015T244	000000


		Polypropylene with 316 Stainless Steel Top Plate



				1 11/16"	43	1 1/4	1 5/8"	2 13/16"	1 3/16"	2 15/16"	1 1/8"	Not Rated	2,000	-20 to 190	1819T47	00000	———	0