1.6" Tubing | McMaster-Carr

Keep out moisture and protect wiring against strain from constant stretching and vibration. Made of reinforced PVC that resists chemicals, this conduit is often used in robotics and other continuous-motion applications. Pair with compatible fittings for a liquid-tight seal indoors, outdoors, or underground.

Conduit

Run wiring through conduit to route and protect it.

								Per Ft.
	Conduit Trade Size	Bend Radius	Color	Temp., ° F	Specs. Met	Choose a Length, ft.		1-99	100-Up
PVC



		1 1/2	8"	Orange	0 to 140	CSA Certified, UL Listed	2, 5, 10, 25, 50	8465K27	000000	000000

Fiberglass Pipe Nipples and Pipe for Chemicals

With excellent corrosion resistance, this pipe can handle a wide range of acids and other highly-corrosive chemicals. Use in metal surface treating applications, plating solution lines, and other chemical process applications. Layers of fiberglass give this pipe better strength and durability than any of our other pipe for chemicals. Pipe meets ASTM D2310 and ASTM D3567 specifications and testing requirements for product dimensions, performance, and material quality.

To connect fittings to pipe, first sand the inside of the fitting and the end of the pipe to remove the surface finish. Next, mix the adhesive (sold separately) until the color is uniform with no streaks. Apply a thin layer of mixed adhesive to the sanded area of the pipe, approximately _1/8" thick. Repeat this process with the inside of the fitting, applying a layer approximately _1/16" thick. After sealant has been applied, push the fitting onto the pipe until it is fully engaged. Finally, use the adhesive-curing heat cable (sold separately) to cure the adhesive. Wrap the tape around the pipe and fitting at the joint, taking care to not overlap the tape. Once you have waited the full cure time, the pipe and fitting will be ready to use.

Pipe—Unthreaded

Cement Socket

Male

	Max. Pressure @ Temp.		Each
Cement Socket Male







	1 1/2 Pipe Size

	5	Fiberglass	Green	300 psi @ 72° F	2823N43	0000000


	10	Fiberglass	Green	300 psi @ 72° F	2823N44	000000

Pipe Cement

		Each
Pipe Cement (11.8-fl. oz. Can)	2905N53	000000

Adhesive-Curing Heat Cable

Image of Product. Front orientation. Heating Tape.

Voltage, V AC	Current, amp	Max. Heat Output, ° F	Lg., ft.	Wd.	Thk.	Cord Lg., ft.		Each
120	15	270	6	1"	1/8"	6	2905N52	0000000

Standard-Wall Brass and Bronze Unthreaded Pipe Nipples and Pipe

With two unthreaded ends, this pipe is designed for brazed connections, which are stronger than threaded connections and less likely to leak. It is also known as Schedule 40. Pipe is brass, which has good corrosion resistance.

Pipe—Unthreaded

Braze Socket Male

Seamless—Pipe has a smooth interior for unrestricted flow and is stronger than welded pipe.

	Pipe						Brazing Rings
	Lg., ft.	Construction	Pipe Schedule	Material		Each		Each
Braze Socket Male







				1 1/2 Pipe Size

				1	Seamless	40	230 Brass	4501K78	000000	2190K48	000000


				3	Seamless	40	230 Brass	4501K58	000000	2190K48	00000
				6	Seamless	40	230 Brass	4501K37	000000	2190K48	00000

Standard-Wall Brass and Bronze Threaded Pipe Nipples and Pipe

Also known as Schedule 40, this pipe is for use in low-pressure flow applications. It is brass, which offers good corrosion resistance.

Pipe—Threaded on Both Ends

Male

Seamless—Pipe has a smooth interior for unrestricted flow and is stronger than welded pipe.

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.

	Material	Food Industry Std.		Each
BSPT Male







	1 1/2 Pipe Size

	12"	Seamless	40	230 Brass	NSF/ANSI 61	4824K318	0000000


	36"	Seamless	40	230 Brass	NSF/ANSI 61	4824K328	000000

Pipe Adapters—Fully Threaded

Male

Fully threaded pipe is also known as a close nipple; it is threaded on each end to the center.

Seamless—Pipe has a smooth interior for unrestricted flow and is stronger than welded pipe.

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.

	Pipe Size
	(A)	(B)	Lg.	Construction	Pipe Schedule	Material	Food Industry Std.		Each
BSPT Male × NPT Male



		1 1/2	1 1/2	1 3/4"	Seamless	40	230 Brass	NSF/ANSI 61	5832T312	000000

Pipe Adapters—Threaded on Both Ends

Male

Seamless—Pipe has a smooth interior for unrestricted flow and is stronger than welded pipe.

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.

	Material	Food Industry Std.		Each
BSPT Male × NPT Male







	1 1/2 Pipe Size

	2"	Seamless	40	230 Brass	NSF/ANSI 61	5832T315	000000


	3"	Seamless	40	230 Brass	NSF/ANSI 61	5832T317	00000
	4"	Seamless	40	230 Brass	NSF/ANSI 61	5832T321	00000
	6"	Seamless	40	230 Brass	NSF/ANSI 61	5832T324	00000
	12"	Seamless	40	230 Brass	NSF/ANSI 61	5832T334	000000
	36"	Seamless	40	230 Brass	NSF/ANSI 61	5832T344	000000

Pipe Adapters—Threaded on One End

Male × Male

Seamless—Pipe has a smooth interior for unrestricted flow and is stronger than welded pipe.

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.

	Material	Food Industry Std.		Each
NPT Male × Butt Weld/Socket Connect/Braze Socket Male







	1 1/2 Pipe Size

	2"	Seamless	40	230 Brass	NSF/ANSI 61	9580K37	000000


	3"	Seamless	40	230 Brass	NSF/ANSI 61	9580K47	00000
	4"	Seamless	40	230 Brass	NSF/ANSI 61	9580K57	00000

Standard-Wall Plastic Pipe Fittings for Water

Connect these fittings to Schedule 40 plastic pipe–they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.

To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For metal threads, use PTFE tape. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.

Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.

Note: For fittings that are not rated for pressure, you can use the pressure rating of the plastic pipe as a reference. Threaded fittings are limited to 50% of the rated pressure of the pipe.

Bushing Straight Reducing Adapters

Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.

	Pipe Size
	(A)	(B)	Pipe Schedule	Body Shape	Material	Color	Max. Pressure @ Temp.	Food Industry Std.		Each
Cement Socket Male × NPT Female



		1 1/2	1	40	Hex	PVC	White	Not Rated	NSF/ANSI 61	4880K209	00000

Standard-Wall Brass and Bronze Threaded Pipe Nipples and Pipe Assortments for Drinking Water

Image of Product. Front orientation. Pipe and Fittings. Standard-Wall Brass and Bronze Threaded Pipe Nipples and Pipe Assortments for Drinking Water, Male.

Male

Keep various lengths of brass pipe on hand for applications requiring good corrosion resistance. The pipe in these assortments is threaded, so you can take apart its connections for maintenance and repair. They’re Schedule 40, so they should be used in low-pressure applications. This pipe is seamless, so it has a smooth interior for unrestricted flow, and it’s stronger than welded pipe. Fully threaded pipe nipples are also known as a close nipple; they are threaded on each end to the center.

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.

	No. of Pieces	Pipe Schedule	Includes	Material	Mil. Spec.	Food Industry Std.		Each
NPT Male



	1 1/2	25	40	5 fully threaded 1 3/4" Lg. nipples 20 threaded-on-both-ends nipples in the following lengths: 2” (5 ea.), 2 1/2” (3 ea.), 3” (2 ea.), 3 1/2” (2 ea.), 4” (2 ea.), 4 1/2” (1 ea.), 5” (2 ea.), 5 1/2” (1 ea.), 6" (2 ea.)	230 Brass	Fed. Spec. WW-N-351	NSF/ANSI 61	5292N21	0000000