We will reply to your message within an hour.
More
With a diameter of 2" or larger, this tubing has the girth to handle high volumes of acids and other harsh substances.
With a diameter of 2" or larger, this tubing has the girth to handle high-volume beverage and bulk food processing applications.
Conductive material embedded in the walls, along with a metal strip, lets this tubing divert static buildup away from sensitive equipment when conveying dry materials such as flour, salt, and sugar. Tubing has a diameter of 4" or larger to handle bulk food processing applications.
Move high volumes of dry bulk food, powders, and pellets around your food processing plant while reducing the risk of contaminating the food.
Hose is SBR rubber, so it stands up to the wear and tear of daily use.
Remove accumulated water from pits, loading docks, and other flooded areas with this general purpose suction hose.
Draw water out of pits, loading docks, and other areas prone to flooding through lines connected by cam-and-groove fittings.
Spiral reinforcement on the outside of the hose acts as a wear strip to protect against damage caused by dragging.
Drain water from one place to another. Hose lays flat and folds up for carrying and storage.
Silicone rubber gives this hose, often called radiator hose, the ability to handle high-heat conditions.
Commonly known as radiator hose, this hose is for low-pressure coolant applications.
Reinforced by aramid fabric, this silicone rubber hose handles higher temperatures than any other coolant hose we offer.
Transport milk, syrup, meat, and other wet food and beverages through your line.
Move flour, grain, rice, sugar, and other dry food through your line.
Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.
More flexible than rigid stainless steel tubing, this hose allows you to link high-vacuum components that are misaligned. Also known as bellows. Equipped with a claw-clamp (ISO-K) fitting on each end, this hose connects to large components with fittings starting at trade number 63.
Metal interlocked strips create a rigid, durable hose that stays strong under high temperatures.
Increase or decrease the hose diameter by up to 25% with a two-handed twist.
Form elbows and bends with this hose and it will hold its shape without support.
Rugged, yet pliable PVC makes this a good general purpose hose for venting smoke, propane fumes, and water-based paint fumes.
With the smallest bend radius of all the fume hose we offer, this lightweight hose can handle tight turns around equipment.
Let go of this hose and it will spring back out of your way.
If you’re tight on storage space, this hose compresses down to a small size.
Hose has a single thin layer of PVC-coated fiberglass for venting smoke, water-based paint fumes, and welding fumes.
Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.
Not only does this hose stand up to corrosive fumes, it has a metal spiral on the outside that acts as a wear strip to protect against damage.
Alumina-coated glass fabric withstands extreme temperatures like stainless steel, but is much more flexible.
Vent smoke, water-based paint fumes, and welding fumes with this hose that gives you a clear view inside your line.
A nonstick PTFE liner gives this hose the ability to handle corrosive fumes such as smoke, paint fumes, hydrochloric acid fumes, and toluene fumes.
Commonly used in garages, this thick rubber hose will bounce back when stepped on or driven over.
A thick layer of PVC with a metal spiral lets this hose handle particles heavier than dust, including cardboard fibers.
The neoprene coating on this hose withstands continuous motion without weakening.
Tough both inside and out, this durable polyurethane hose has a metal spiral that acts as a wear strip to protect against damage.
Hose meets UL 94 V-2 for flame retardance.
Lightweight, yet strong, this aluminum hose bends and maintains its shape without support.
Blow jagged, abrasive materials through this hose without worrying about punctures or tears. It’s made of extra--thick TPU (thermoplastic polyurethane).
Formed by metal interlocked strips, this hose has the strength to stand up to sharp, abrasive materials.
SBR (styrene butadiene rubber) is blended with carbon, which dissipates static electricity without the need for a grounding wire.
Hose has a plastic spiral that acts as a wear strip to protect against damage.
The strongest nonmetal duct hose we offer, this SBR (styrene butadiene rubber) hose is reinforced with yarn and has a metal spiral.
A polyurethane liner gives this hose extra strength to handle high pressure and vacuum applications.
Blow grain, sugar, flour, and powders through this hose—it’s made of FDA listed material. Hose has a metal spiral that dissipates static when used in a grounded system.
These short lengths of hose have a collar on each end to prevent the clamp from slipping off. FDA compliant for direct contact with food, they’re often used to move rice and grain.
A good general purpose hose for blowing and vacuum applications, this hose is for use with grinding dust, sawdust, and lint.
The neoprene coating on this hose holds up under high heat.
Surrounded by a protective plastic spiral, this hose bounces back to its original shape when stepped on and resists wear from being dragged across rough floors.
This white hose makes dirt and other contaminants easy to spot.
In addition to offering excellent abrasion resistance, this hose meets UL 94 HB for flame retardance.
This general purpose hose for blowing and vacuum applications has a thick PVC wear strip that protects against damage caused by dragging.
A blend of rubber and plastic creates a hose that's flexible, yet tough enough to handle abrasive particles such as grinding dust and sawdust. It's also known as TPU (thermoplastic polyurethane).
The small bend radius makes this hose easy to wrap around corners and install in tight spaces.
The neoprene coating on this hose contains carbon to dissipate static when hose is installed in a grounded system.
Bend this hose in any direction and it will hold its shape without support.
Unlike fabric duct hose, this lightweight aluminum hose can bend around corners and hold its shape.
Step on this polypropylene hose and the flexible plastic spiral will pop back up unharmed.
Insulated with a layer of fiberglass, this ultra-thin lightweight hose keeps air at a constant temperature.
A layer of fiberglass insulation helps maintain the temperature inside the hose. Use for heating and cooling applications in outdoor environments.
A metalized polyester cover reflects heat so the temperature inside the hose won’t rise.
The ends of this hose have a belt-and-buckle connection that eliminates the need for clamps.
An acrylic coating allows this polyester hose to hold up under higher temperatures than other fabric hose.
A general purpose duct hose for blowing and venting air, this polyester hose is lightweight and has a wear strip to protect against damage.
Our most versatile duct hose for blowing and venting air, this polyester hose is lightweight and very flexible.
The most compressible hose we offer, this duct hose collapses to 5% of its length for easy storage.
Bend this hose into position in heating and cooling applications where it’s important to maintain the temperature of the air inside the hose.
A smooth interior allows for unrestricted flow and makes this hose easy to clean.
Gray cast iron machines faster with less wear on cutting tools than most types of steel. It's often fabricated into gears, pulleys, rollers, and bushings.
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It's also known as SAE 660 and is often used for bearings, bushings, and thrust washers.
With a temperature rating of 1800°F or higher, this sleeving can withstand hotter temperatures than fiberglass and most ceramic.
For use with gas-fired equipment, such as boilers and furnaces, these vent pipes and fittings withstand temperatures up to 400° F. Also known as type B gas vents.
Built to withstand temperatures up to 1000° F, these vent pipes and fittings are for use with boilers, furnaces, stoves, and other equipment that is fired by coal, gas, oil, propane, or wood.