Closed-Body Clevis-to-Wire Rope Turnbuckles—For Lifting


Use these turnbuckles in lifting applications with wire rope. Their closed body not only protects threads from damage and debris, but also keeps these turnbuckles slim enough to fit in tight spaces.
To install, fray the end of the wire rope with a marlin spike and screw the socket over the plug. You'll know the wire rope is secure if you see wire strands through the inspection hole on the turnbuckle body. Use an assembly kit (not included) to support the wire rope while you drive the plug into the wire rope end.
Zinc-plated steel is mildly corrosion resistant.
316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
Warning: Turnbuckles must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Note: Capacities listed are for vertical lifting only.
For technical drawings and 3-D models, click on a part number.
Clevis Pin | For Wire Rope | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Dia. | Closure Type | Clevis Inside Wd. | Thread Size | Dia. | Construction | Wire Rope Fitting Type | Specifications Met | Each | |
Steel Body with Steel Fittings | |||||||||||||
3,020 | 13 1/4" | 5 5/16" | 18 9/16" | 1/2" | Cotter Pin | 7/16" | 3/4"-16 | 3/8" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Plug Lock | ASME B30.26 | 0000000 | 0000000 |
Zinc-Plated Steel Body with Steel Fittings | |||||||||||||
3,020 | 13 1/4" | 5 5/16" | 18 9/16" | 1/2" | Cotter Pin | 7/16" | 3/4"-16 | 3/8" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Plug Lock | ASME B30.26 | 0000000 | 000000 |
316 Stainless Steel Body with Steel Fittings | |||||||||||||
3,020 | 13 1/4" | 5 5/16" | 18 9/16" | 1/2" | Cotter Pin | 7/16" | 3/4"-16 | 3/8" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Plug Lock | ASME B30.26 | 0000000 | 000000 |
Internally Threaded Turnbuckle-Style Connecting Rods


Similar to turnbuckles, these rods have right-hand threads on one end and left-hand threads on the other so you can make a linkage that adjusts for tension. Add right- and left-hand threaded rod ends to build your linkages. Rods have a hex-shaped body so you can adjust them with a wrench.
Carbon steel rods generally handle higher loads than aluminum and stainless steel rods.
Aluminum rods are lightweight and have good corrosion resistance.
18-8 stainless steel rods have good corrosion and chemical resistance
Note: The end with the left-hand threads is marked with a groove.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Hex Size | Each | |
Carbon Steel | ||||
---|---|---|---|---|
2" O'all Lg. | ||||
3/4"-16 | 3/4" | 1" | 0000000 | 000000 |
3" O'all Lg. | ||||
3/4"-16 | 1" | 1" | 0000000 | 00000 |
4" O'all Lg. | ||||
3/4"-16 | 1" | 1" | 0000000 | 00000 |
6" O'all Lg. | ||||
3/4"-16 | 1" | 1" | 0000000 | 00000 |
12" O'all Lg. | ||||
3/4"-16 | 1" | 1" | 00000000 | 00000 |
18-8 Stainless Steel | ||||
6" O'all Lg. | ||||
3/4"-16 | 1" | 1" | 0000000 | 00000 |
Aluminum | ||||
2" O'all Lg. | ||||
3/4"-16 | 3/4" | 1" | 0000000 | 00000 |
3" O'all Lg. | ||||
3/4"-16 | 1" | 1" | 0000000 | 00000 |
4" O'all Lg. | ||||
3/4"-16 | 1" | 1" | 0000000 | 00000 |
6" O'all Lg. | ||||
3/4"-16 | 1" | 1" | 0000000 | 00000 |
Turnbuckle-Style Connecting Rods


Similar to turnbuckles, these rods have right-hand threads on one end and left-hand threads on the other so you can make a linkage that adjusts for tension. Add right- and left-hand threaded rod ends to build your linkages. Rods have a hex-shaped body so you can adjust them with a wrench.
Carbon steel rods handle higher loads than aluminum and 18-8 stainless steel rods.
Aluminum rods are lightweight and have good corrosion resistance.
18-8 stainless steel rods are corrosion resistant and stand up to chemicals.
Note: The end with the left-hand threads is marked with a groove.
For technical drawings and 3-D models, click on a part number.
Carbon Steel | 18-8 Stainless Steel | Aluminum | ||||||
---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Hex Size | Each | Each | Each | |||
4" O'all Lg. | ||||||||
3/4"-16 | 1 3/4" | 3/4" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
6" O'all Lg. | ||||||||
3/4"-16 | 2" | 3/4" | 00000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 |
12" O'all Lg. | ||||||||
3/4"-16 | 2" | 3/4" | 00000000 | 00000 | 00000000 | 000000 | 0000000 | 00000 |
18" O'all Lg. | ||||||||
3/4"-16 | 2" | 3/4" | 00000000 | 00000 | 00000000 | 000000 | 0000000 | 00000 |
24" O'all Lg. | ||||||||
3/4"-16 | 2" | 3/4" | 00000000 | 00000 | 000000 | 00 | 0000000 | 00000 |