Air-Powered Hold-Down Fixture Clamps
Adjust the air pressure to quickly and consistently clamp and release parts. The arm on these clamps rotates 90° into position over the workpiece and then moves straight down to clamp. Disengage to rotate the arm out of the way and load or unload parts. Also known as swing clamps, they are used with a solid state switch or Reed function switch with M8 male 3-pin connectors. Connect the clamp's ports to a control valve and an air line. Clamps mount with screws.
Clamps with rubber-tipped holding screw are nonmarring. Tip is removable.
For technical drawings and 3-D models, click on a part number.
Body | Holding Screw | Female Air Inlet and Outlet | Mount. Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Clamping Clearance | Vertical Travel During Rotation | Max. Clamping Stroke | Holding Cap., lbs. | Reach | Wd. | Dp. | O'all Ht. | Thread Size  | Tip Material | Pipe Size | Thread Size | Thread Type | Mount. Fasteners Included | No. of | Dia. | Material | Each | |
90° Clockwise Rotation | ||||||||||||||||||
| 4 3/8" | 15/32" | 3/8" | 35 | 1 1/8" | 1 1/4" | 1 1/4" | 4 3/4" | 10-32 | Steel | __ | 10-32 | UNF | No | 6 | 3/16" | Aluminum | 00000000 | 0000000 |
| 5 1/2" | 3/4" | 1/2" | 130 | 2" | 2" | 3" | 6 3/8" | 3/8"-16 | Rubber | 1/8 | __ | NPT | No | 6 | 11/32" | Aluminum | 00000000 | 000000 |
90° Counterclockwise Rotation | ||||||||||||||||||
| 4 3/8" | 15/32" | 3/8" | 35 | 1 1/8" | 1 1/4" | 1 1/4" | 4 3/4" | 10-32 | Steel | __ | 10-32 | UNF | No | 6 | 3/16" | Aluminum | 00000000 | 000000 |
| 5 1/2" | 3/4" | 1/2" | 130 | 2" | 2" | 3" | 6 3/8" | 3/8"-16 | Rubber | 1/8 | __ | NPT | No | 6 | 11/32" | Aluminum | 00000000 | 000000 |
Threaded Air-Powered Hold-Down Fixture Clamps
Screw these clamps directly into a tapped hole and use air pressure to quickly and consistently clamp and release parts. The arm rotates 90° into position over the workpiece and then moves straight down to clamp. Disengage to rotate the arm out of the way and load or unload parts. Also known as swing clamps, they're used with a solid state switch or Reed function switch with M8 male 3-pin connectors. Connect the clamp's ports to a control valve and an air line. To hold clamps in an untapped hole, use a mounting block (sold separately).
Clamps with rubber-tipped holding screw are nonmarring. Tip is removable.
For technical drawings and 3-D models, click on a part number.
Body | Holding Screw | Female Air Inlet and Outlet | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Clamping Clearance | Vertical Travel During Rotation | Max. Clamping Stroke | Holding Cap., lbs. | Reach | Thread Size | Thread Lg. | O'all Ht. | Thread Size | Tip Material | Pipe Size | Thread Size | Thread Type | Material | Each | |
90° Clockwise Rotation | |||||||||||||||
| 4 3/8" | 15/32" | 3/8" | 35 | 1 1/8" | 1 1/8"-16 | 2 7/8" | 4 3/4" | 10-32 | Steel | __ | 10-32 | UNF | Aluminum | 00000000 | 0000000 |
| 5 5/16" | 3/4" | 1/2" | 95 | 1 5/8" | 1 3/4"-12 | 3 1/4" | 6 1/8" | 3/8"-16 | Rubber | 1/8 | __ | NPT | Aluminum | 00000000 | 000000 |
90° Counterclockwise Rotation | |||||||||||||||
| 4 3/8" | 15/32" | 3/8" | 35 | 1 1/8" | 1 1/8"-16 | 2 7/8" | 4 3/4" | 10-32 | Steel | __ | 10-32 | UNF | Aluminum | 00000000 | 000000 |
| 5 5/16" | 3/4" | 1/2" | 95 | 1 5/8" | 1 3/4"-12 | 3 1/4" | 6 1/8" | 3/8"-16 | Rubber | 1/8 | __ | NPT | Aluminum | 00000000 | 000000 |