Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with two-bolt flange.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting.

Embedded lubricant particles increase the load capacity of these bearings while also making them slippery.

Made of FDA listed PEEK, these bearings are suitable for direct contact with food. The closed backing blocks out dust and other contaminants.

Capable of handling temperatures from -400° to 750° F, these graphalloy bearings have the widest temperature range of any of our mounted bearings.

Ball bearings operate with less friction than other bearings, so they can run at higher speeds.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

These bearings have the highest speed ratings of any mounted ball bearing that we offer.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.

These nylon bearings swivel inside their housing to compensate for over 20° of shaft misalignment.

Made from slippery materials, these bearings reduce friction without the oily mess.

Made of acetal blended with PTFE, these bearings handle speeds twice as fast as standard sleeve bearings.

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.