Take your time to precisely align parts before bonding, and maintain flexibility afterward. These adhesives won't harden until you expose them to a compatible light source. They also remain elastic so the bond can bend without breaking.

Take your time to precisely align transparent parts before you bond them. Instead of gripping immediately, these adhesives only harden when you expose them to a compatible light source. They also keep surfaces crystal clear because they don't cloud up after hardening.

Take your time to precisely align parts, then create bonds that stay strong in humid and damp environments. These adhesives won't harden until you expose them to a compatible light source.

In just 20 seconds under a UV light, these urethane compounds form into a strong protective layer on electrical components. They withstand a wide range of temperatures and are good electrical insulators. They also stop chemicals, moisture, and dust from damaging your device. With excellent flexibility, they protect against vibration and impact. Since they also work as an adhesive, you can use them to bond and insulate components such as electrical connectors and thermal switches. No mixing required.

These compounds dry quickly when exposed to UV light allowing you to handle the potted items sooner. Made of silicone rubber, they’re softer and more flexible than epoxy or urethane compounds, so they’re better at protecting against shocks and vibration. They also withstand a wider range of temperatures, so they’re often used with electronics that heat and cool rapidly. These compounds are excellent electrical insulators, and they’ll shield your components from moisture and dust. However, they don’t hold up well to abrasion or chemicals. The tapered nozzle lets you apply them precisely.

Activators are required for no-mix acrylic structural adhesives to create adhesion.

Hide proprietary information on electrical components while also protecting them from moisture, dust, and static. All it takes is a single thin layer of these black coatings. They’re often used to protect custom parts while prototyping. Place them under a UV curing lamp to fully harden them in just 5 seconds. Made of urethane rubber, they resist chemicals and scratches and won’t crack in low temperatures. That means they’re great for harsh environments. These coatings meet UL 94 V-0 for flame retardance.

These coatings are thinner than potting compounds, so they flow into the smallest contours to cover your parts completely. They also don’t require a potting box or other container. Dispense these coatings with a gun (sold separately).

Handle potted items within minutes—these potting compounds dry quickly when exposed to UV light. For added strength and durability, cure them with heat. Since they’re epoxy, they won’t break down from chemicals or moisture. They’re also excellent electrical insulators and withstand a wide range of temperatures. Use them to shield components from dust, moisture, chemicals, mechanical shock, and vibration. You need a mixer nozzle (not included) and a gun and plunger (both sold separately) to dispense. The nozzle lets you apply these compounds precisely.

For maximum effectiveness, these compounds need to be heat cured after they’re cured with UV light. Overall dry time includes heat curing at 149° F.

Thinner than potting compounds, these coatings flow easily into small spaces between electrical components. They require an ultraviolet curing lamp to reach full strength. Use them to secure and insulate hardware on printed circuit boards.