Handles on either end and four swivel casters make these carts easy to maneuver.

Carts are made of welded steel for maximum durability.

A braided cable on these carts dissipates static charges, making them useful for moving electronics and other static-sensitive equipment.

Keep multimeters, oscilloscopes, and other instruments at a convenient viewing angle and height.

Store, organize, and transport spools of wire and small tools around your jobsite.

Made of welded stainless steel, these carts combine corrosion resistance with the strength and durability of steel carts.

Not only are these carts corrosion resistant, they also meet NSF/ANSI standards so they're suitable for food processing applications.

The shelves on these carts have high sides to prevent items from sliding off.

Keep paperwork organized while in transit. These carts hold letter- and legal-size hanging folders.

High mesh panels on three sides and an open top allow you to stack tall items while maintaining good visibility and quick access.

Panels on three sides let you stack material high, while the top shelf can be used as a work surface.

A place for everything—these carts hold mops, buckets, cleaning supplies, floor signs, and more.

No need to lug around a ladder and a cart—these carts do the job of both.

These economical trucks carry loads up to 600 lbs.

For added strength, the platform on these trucks is reinforced with steel to handle loads of 1,000 lbs. or more.

The aluminum platform on these trucks weighs less than many steel and wood platforms but is still strong.

Reduce bending while loading and unloading—raised platforms keep material at a comfortable working height.

Stakes at each corner hold loads in place during transport and are easily removed for unloading.

These wagons provide a smooth and gentle ride for transporting fragile loads. They are quieter and absorb impact better than steel wagons.

Made of steel for durability, these trucks have removable rails that allow you to configure them to accommodate a variety of long, flat loads.

Add wheels to a door, partition, or piece of sheet stock to make moving a one-person job.

These seamless trucks have a capped drain for easy cleaning and sanitizing, and are made of FDA listed materials for use with food. They resist dents, corrosion, and many chemicals and have ribbed sidewalls for added strength.

Reduce bending while loading and unloading—elevated trucks provide a comfortable working height. These seamless, lightweight trucks resist dents, corrosion, and many chemicals.

The top rim on these trucks is double-walled to handle the hardest knocks. They are made of lightweight plastic that resists dents, corrosion, and many chemicals.

These trucks have solid side panels to prevent small items from falling out. They are made from heavy gauge all-welded steel for strength and durability.

Gravity keeps long loads centered and balanced—great for pipe, bar stock, and channel.

Zip across manufacturing campuses to transport people and loads in the fastest carriers that we offer. While these carriers are similar to golf carts, they’re 50% faster, moving at speeds up to 19 mph.

Start with the workbench and then customize the interior by adding drawers and shelves.

Tilt back these workbenches to roll them anywhere. Open the lid to use it as a work surface.

Often used in laboratories and food-processing plants, these workbenches resist corrosion.

Reinforced for strength and durability, these workbenches can hold twice the weight of our standard large-capacity cabinet workbenches.

Often used in laboratories, these tables stand up to repeated washdowns and won't corrode from grease and chemicals. Use them to elevate machinery and equipment up to 24" from the floor.

These durable tables won't warp or splinter. Use them to elevate machinery and equipment up to 24" from the floor.

Without a shelf, these tables provide room to pull up a stool or chair. The durable steel top won't warp or splinter.

Without a shelf, these tables provide room to pull up a stool or chair. They withstand chemicals, grease, and repeated washdowns for use in laboratories and food-processing areas.

Welded for strength and stability, these tables support 3,000 to 5,500 lbs.

These durable tables won't warp or splinter. They can be configured at a custom height.

Turn the crank to adjust the height of these tables without clearing off the top or loosening leg bolts. They can be configured for either seated or standing tasks.

These workstations have almost twice the top capacity of our standard stand-up-height workstations.

Used on hotel bellman's carts, these casters have a compact frame for use on small appliances and furniture.

Both the wheel bearings and the swivel bearings are protected to lengthen the life of these casters.

The lightweight wheels on these casters are easy to get rolling.

Chrome or zinc plating gives these casters a bright, clean finish.

Our most popular casters for carts and dollies.

Made from a special blend of rubber, the wheels on these casters roll easily over smooth and rough surfaces.

A shield on the swivel keeps out contaminants for extended service life.

These air-filled wheels absorb shock to eliminate noise and cushion your load.

These casters have a strong frame and a cushioning wheel for shock absorption.

The steel frame has a black powder-coated finish to blend in with your equipment.

The soft rubber wheel and the sturdy steel frame withstand shock to protect your load.

Minimize shock to your load on bumpy surfaces with these spring-loaded casters.

Metal wheel guards keep dust and debris from restricting motion.

Withstanding temperatures up to 1600° F, these are the most heat-resistant casters we offer.

These casters match many common carts and dollies.

Often used on creeper stools, these have a smooth-rolling angled wheel that creates a low profile.

The lightweight wheels on these casters are easy to get rolling.

The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor.

A shield on the swivel keeps out contaminants for extended service life.

These are good general purpose casters for moderately heavy loads.

Our most popular casters for carts and dollies.

Mount these casters to the corners of carts, equipment, and angle iron.

The legs are less angled than other casters to withstand the impact from containers that are frequently picked up and set back down.

Our most popular casters for carts and dollies.

Also known as twin-wheel casters, these lightweight and economical casters are often used on furniture and displays.

A floor-friendly alternative to casters with metal wheels, these have heat-resistant treads that withstand temperatures up to 470° F.

Stable and easy to turn, these casters have some of the lowest mount heights in their capacity range.

Mount these casters to the corners of carts, equipment, and angle iron.

These are good general purpose casters for moderately heavy loads.

The most durable plastic wheel, the nylon wheels on these casters are impact and wear resistant. They work well on smooth surfaces. Their 304 stainless steel frame is corrosion resistant.

The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor. Polyurethane wheels combine the abrasion resistance of plastic with the shock‐ and sound-absorbing qualities of rubber. Their 304 stainless steel frame is corrosion resistant.

Our most corrosion-resistant casters have a 316 stainless steel frame and stainless steel wheel bearings that stand up to frequent washdowns. Their soft rubber wheels absorb shock and provide good traction on rough surfaces.

Forged steel construction gives these casters the strength for demanding applications.

These economical casters are designed for moderately heavy loads.

Double-ball bearings and kingpinless swivel raceways offer better weight distribution and smooth swiveling.

A thick frame and metal debris guards on the wheel bearings ensure smooth operation and extended service life.

With some of the highest capacities in their capacity range, these casters have a kingpinless swivel design for impact resistance and smooth swiveling.

These casters have a strong frame and a cushioning wheel for shock absorption.

A floor-friendly alternative to casters with metal wheels, these have heat-resistant treads that withstand temperatures up to 350° F.

The legs are less angled than other casters to withstand the impact from containers that are frequently picked up and set back down.

Thicker frames, larger mounting plates, and a heavy duty swivel design make these casters more durable than other high-capacity casters.

These economical casters are designed for heavy loads.

A thick frame and metal debris guards on the wheel bearings ensure smooth operation and extended service life.