We will reply to your message within an hour.
More
Remove accumulated water from pits, loading docks, and other flooded areas with this general purpose suction hose.
Draw water out of pits, loading docks, and other areas prone to flooding through lines connected by cam-and-groove fittings.
Blended rubber construction with extra-strong reinforcement gives this hose strength to transfer large volumes of water in high-vacuum or high-pressure operations.
Spiral reinforcement on the outside of the hose acts as a wear strip to protect against damage caused by dragging.
If you need to access your line frequently, the fittings on this hose connect and disconnect quickly.
Also know as pump connectors, hose is sized to specific lengths for attaching to pumps.
Made of thick, rigid nylon, this hose has excellent durability and the highest pressure rating of the retracting hose we offer.
Hose is polyurethane so it stretches and flexes more than nylon retracting hose.
Supply air to two power tools without worrying about your lines getting tangled.
Hose is PVC, so it’s light and easy to handle.
Made of polyurethane, this hose stands up to the wear and tear of daily use.
Use this neoprene hose in temperatures up to 210° F.
Not only can this hose withstand high temperatures, it won't collapse in low-vacuum applications. It's also known as radiator hose.
With a tighter bend radius than other coolant hose, this hose can twist and turn around equipment.
Connect to high-vacuum pumps to route exhaust fumes out of your work area. Also known as roughing hose.
A braided exterior protects this hose from abrasion and over-bending. Also known as bellows, the ribbed interior makes it flexible enough to connect high-vacuum components that aren't directly aligned.
More flexible than rigid stainless steel tubing, this hose allows you to link high-vacuum components that are misaligned. Also known as bellows. Equipped with a claw-clamp (ISO-K) fitting on each end, this hose connects to large components with fittings starting at trade number 63.
Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.
With a tighter bend radius than other petroleum hose, this hose can easily twist and turn around equipment.
The most durable dry-food hose we offer, this hose is made of gum rubber for excellent resistance to cuts and tears.
Move flour, grain, rice, sugar, and other dry food through your line.
Transfer flour, grain, rice, sugar, and other dry food through lines connected by cam-and-groove fittings.
Transport milk, syrup, meat, and other wet food and beverages through your line.
Move milk, syrup, meat, and other wet-food and drink products through lines connected by cam-and-groove fittings.
An EPDM cover guards this hose, so it won't tear if scraped or break down from ozone or UV light. Use it to move milk, syrup, meat, and other wet and food and beverages.
The super-smooth interior of this hose prevents product buildup. Use hose with juice, milk, and syrup.
Strengthened with yarn, this hose handles high-pressure vacuum and suction without getting kinked or crushed. Its fittings easily detach, giving you quick access to your line.
Strengthened with yarn, this hose handles high-pressure vacuum and suction without getting kinked or crushed.
Cut the hose to your desired length and attach the fittings. You don't need any special equipment to install.
Use this conductive hose in a grounded system to eliminate static buildup. The material is blended with carbon black, which conducts static charges away from the hose walls.
The heating wire in this hose warms adhesives or paraffin wax to keep them flowing. Pair it with the matching temperature controller to set the temperature.
Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.
You don’t need a lot of force to bend this low-pressure chemical hose. The extra flexibility makes it good for offset connections and tight spaces.
Step on this hose and it springs back to its original shape.
Expose this UHMW (ultra-high molecular weight) polyethylene hose to harsh physical conditions without worrying about it deteriorating or becoming brittle.
Transfer industrial gases in temperatures up to 1500° F with this hose.
Rated for low-pressure applications up to 500 psi, this hose works well as a return line in your hydraulic system.
Attach push-on barbed fittings to this hose for use in low-pressure hydraulic applications. No clamps are needed to secure fittings to the hose; the more you pull on the fittings, the tighter the hose will grip.
Use this hose to transfer fluid between pumps, cylinders, and other parts of your hydraulic system.
Transfer fluid between pumps, cylinders, and other parts of your hydraulic system with this hose that has attached fittings to save time and eliminate points of failure.
Made of nylon, this hose is lighter and easier to maneuver than rubber hydraulic hose.
The fittings are also known as an instrumentation fittings. They have two sleeves (double ferrules) that bite into metal tubing for a strong seal.
The fittings are a short length of tubing that inserts into the end of another tube fitting.
Also known as an instrumentation fittings, the Yor-Lok fitting has two sleeves (double ferrules) that bite into metal tubing for a strong seal. The tube stem fitting is a short length of tubing that inserts into the end of another tube fitting.
The Yor-Lok fitting is also known as an instrumentation fitting. It has two sleeves (double ferrules) that bite into metal tubing for a strong seal.
Hose has good oil-resistance, so it won’t deteriorate or become brittle when exposed to grease and lubricants.
Multiple colors allow you to color-code your line for easy identification.
A braid reinforcement gives this tubing excellent strength in high-pressure applications up to 250 psi.
Static electricity will not build up in this tubing, so you can use it near sensitive equipment.
This multiple-line tubing holds together on its own, so there's no need for cable ties or tape.
Keep your work site safe and clutter free–this coiled tubing extends when you need it and retracts out of the way when you don't.
Designed for use in welding applications, this tubing has multiple layers of material and is specially formulated to self-extinguish.
Thick walls give this tubing excellent abrasion resistance.
Protect sensitive equipment with this tubing—it is specially formulated to reduce the buildup of static electricity.
This general purpose tubing has hard walls, yet is flexible enough for gradual bends. It has excellent strength and durability.
Excellent strength and durability allow this tubing to handle high-pressure air and water applications up to 950 psi.
Keep your work area tidy with this coiled tubing that extends when you need it and retracts out of the way when you don’t.
An internal reinforcement gives this tubing the strength to handle high-pressure applications up to 350 psi.
This tubing has hard walls like copper tubing, but is lighter in weight and easier to install. It connects to fittings with no heat or soldering required. Tubing meets NSF/ANSI Standard 61 for drinking water.