Filter by
Pipe Size
Thread Type
About Actuated On/Off Valves
More
Threaded Solenoid Diverting Valves
- For Use With: Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon
- Seal Material: Buna-N Rubber
These valves operate on electricity to automatically divert flow between ports. All can direct flow from the center-port inlet to either side-port outlet. Valves cannot shut off flow. They require a minimum pressure drop between the inlet and outlet for operation; the upstream pressure must be 10 psi greater than the downstream pressure. The actuator is directly mounted to the valve body to minimize movement and reduce wear.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size  | Flow Pattern | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Min. Pressure Drop Required | Temp. Range, °F | Actuation Time | Valve Lg. | O'all Ht. | Each | |
Brass Body with Wire Leads—120V AC | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
NPT Female × NPT Female × NPT Female | |||||||||||
| 1/2 | L-Pattern | 3.6 | 180 psi @ 165° F | Pressure Drop Assisted | 10 psi | 35° to 165° | 0 sec. | 3 3/8" | 5 1/8" | 0000000 | 0000000 |
| 3/4 | L-Pattern | 7.3 | 180 psi @ 165° F | Pressure Drop Assisted | 10 psi | 35° to 165° | 0 sec. | 4 1/4" | 6 1/16" | 0000000 | 000000 |