Vented Pins | McMaster-Carr

Filter by

System of Measurement

Diameter

Length

Shaft Type

Material

Thread Size

Performance

Specifications Met

Double Shear Breaking Strength

Minimum Hardness

Hardness

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

RoHS

Steel Grade

Export Control Classification Number (ECCN)

Thread Pitch

Passivation

221 Products

Shaft Type

Flat

Create a vent for easier installation in blind holes

140 products

Spiral

Vent air like flat-shaft pins but hold more securely

85 products

Performance

High Strength

Won't bend or break from stress and vibration

90 products

Corrosion Resistant

Resist rust in wet and outdoor environments

102 products

Vented Pull-Out Dowel Pins

Insert and remove from blind holes with less effort than pins that aren't vented. The vent relieves trapped air, so pressure doesn't create resistance as you install the pin. Because they have a tapped end, you can thread in a screw and pull the pin out with a removal tool (sold separately). You can also pull using pliers, but there’s more risk of damaging the hole.

Flat Shaft

The flat side of these pins creates a vent that's less likely to be blocked than a spiral shaft, but doesn’t offer quite as strong of a hold.

High-Strength Alloy Steel—Our strongest, most wear-resistant pins, these won't bend or break from vibration. Use them for high-stress applications, such as mounting and aligning hydraulic cylinders and injection molds. They perform best in dry environments since moisture will cause them to rust.

Spring Steel—These pins won't deform from stress and vibration. They're stronger than stainless steel but not quite as strong as alloy steel. Pins perform best in dry environments since moisture will cause them to rust.

18-8 Stainless Steel—The choice for wet and outdoor environments. In addition to resisting rust, these pins also withstand mild chemicals such as cleaners and degreasers. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.

	Lg.	Dia. Tolerance	Thread Size	Double Shear Breaking Strength, lbf	Min. Hardness	Specs. Met		Each
High-Strength Alloy Steel







				1/4" Diameter

				3/4"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	97360A110	00000


				1"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	97360A120	0000
				1 1/4"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	97360A130	0000
				1 1/2"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	97360A140	0000
				1 3/4"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	97360A150	0000
				2"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	97360A160	0000
				2 1/2"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	97360A170	0000




						5/16" Diameter

						3/4"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	97360A180	0000


						1"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	97360A190	0000
						1 1/4"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	97360A200	0000
						1 1/2"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	97360A210	0000
						2"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	97360A222	0000
						2 1/2"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	97360A240	0000




								3/8" Diameter

								1"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	97360A250	0000


								1 1/4"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	97360A260	0000
								1 1/2"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	97360A270	0000
								2"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	97360A290	0000
								2 1/4"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	97360A300	0000
								2 1/2"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	97360A310	0000
								3"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	97360A320	0000




										1/2" Diameter

										1"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	97360A330	0000


										1 1/4"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	97360A340	0000
										1 1/2"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	97360A350	0000
										1 3/4"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	97360A360	0000
										2"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	97360A370	0000
										2 1/2"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	97360A390	0000
										3"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	97360A400	0000
										3 1/2"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	97360A410	0000




										5/8" Diameter

		1 1/2"								0.0001" to 0.0003"	1/4"-20	39,000	Rockwell C47	ASME B18.8.2	97360A430	0000


		2"	0.0001" to 0.0003"							1/4"-20	39,000	Rockwell C47	ASME B18.8.2	97360A440	0000
		2 1/4"	0.0001" to 0.0003"							1/4"-20	39,000	Rockwell C47	ASME B18.8.2	97360A480	0000
		2 1/2"	0.0001" to 0.0003"							1/4"-20	39,000	Rockwell C47	ASME B18.8.2	97360A490	0000
		3"	0.0001" to 0.0003"							1/4"-20	39,000	Rockwell C47	ASME B18.8.2	97360A470	00000




										3/4" Diameter

										2"	0.0001" to 0.0003"	5/16"-18	57,000	Rockwell C47	ASME B18.8.2	97360A500	00000


				3"	0.0001" to 0.0003"					5/16"-18	57,000	Rockwell C47	ASME B18.8.2	97360A510	00000
				4"	0.0001" to 0.0003"					5/16"-18	57,000	Rockwell C47	ASME B18.8.2	97360A570	00000




										1" Diameter

										2"	0.0001" to 0.0003"	5/16"-18	102,000	Rockwell C47	ASME B18.8.2	97360A530	00000


										3"	0.0001" to 0.0003"	5/16"-18	102,000	Rockwell C47	ASME B18.8.2	97360A550	00000
										4"	0.0001" to 0.0003"	5/16"-18	102,000	Rockwell C47	ASME B18.8.2	97360A580	00000




										16 mm Diameter

										32 mm	0.007 mm to 0.018 mm	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	98432A382	0000


										40 mm	0.007 mm to 0.018 mm	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	98432A386	0000
										50 mm	0.007 mm to 0.018 mm	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	98432A390	0000
										60 mm	0.007 mm to 0.018 mm	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	98432A394	0000
										70 mm	0.007 mm to 0.018 mm	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	98432A398	0000
										80 mm	0.007 mm to 0.018 mm	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	98432A402	0000


								Spring Steel







												6 mm Diameter

												16 mm	0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	98432A206	0000


												18 mm	0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	98432A210	0000
												20 mm	0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	98432A216	0000
24 mm												0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	98432A220	0000
28 mm	0.004 mm to 0.012 mm											M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	98432A224	0000
30 mm	0.004 mm to 0.012 mm											M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	98432A228	0000
36 mm	0.004 mm to 0.012 mm											M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	98432A236	0000
40 mm	0.004 mm to 0.012 mm											M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	98432A240	0000
50 mm	0.004 mm to 0.012 mm											M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	98432A244	0000




												8 mm Diameter

												20 mm	0.006 mm to 0.015 mm	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	98432A261	0000


		24 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	98432A265	0000
		28 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	98432A269	0000
		30 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	98432A274	0000
		36 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	98432A282	0000
		40 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	98432A286	0000
		50 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	98432A290	0000
		60 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	98432A294	0000
		70 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	98432A298	0000




				10 mm Diameter

				24 mm	0.006 mm to 0.015 mm							M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	98432A303	0000


				28 mm	0.006 mm to 0.015 mm							M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	98432A307	0000
				30 mm	0.006 mm to 0.015 mm							M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	98432A311	0000
				36 mm	0.006 mm to 0.015 mm							M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	98432A315	0000
				40 mm	0.006 mm to 0.015 mm							M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	98432A319	0000
				50 mm	0.006 mm to 0.015 mm	M6 × 1 mm						Not Rated	Rockwell C52	DIN 7979D-m6	98432A323	0000
				60 mm	0.006 mm to 0.015 mm	M6 × 1 mm	Not Rated					Rockwell C52	DIN 7979D-m6	98432A327	0000
				70 mm	0.006 mm to 0.015 mm	M6 × 1 mm	Not Rated					Rockwell C52	DIN 7979D-m6	98432A332	0000




						12 mm Diameter

						24 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	98432A341	0000


						30 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	98432A345	0000
						36 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	98432A349	0000
						40 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	98432A353	0000
						45 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	98432A357	0000
						50 mm	0.007 mm to 0.018 mm	M6 × 1 mm				24,000	Rockwell C52	DIN 7979D-m6	98432A362	0000
						60 mm	0.007 mm to 0.018 mm	M6 × 1 mm	24,000			Rockwell C52	DIN 7979D-m6	98432A366	0000


						18-8 Stainless Steel







										1/4" Diameter

										3/4"	0.0001" to 0.0003"	8-32	Not Rated	Rockwell C47	ASME B18.8.2	97365A110	0000


										1"	0.0001" to 0.0003"	8-32	Not Rated	Rockwell C47	ASME B18.8.2	97365A120	0000
										1 1/4"	0.0001" to 0.0003"	8-32	Not Rated	Rockwell C47	ASME B18.8.2	97365A130	0000
										1 1/2"	0.0001" to 0.0003"	8-32	Not Rated	Rockwell C47	ASME B18.8.2	97365A140	0000
1 3/4"										0.0001" to 0.0003"	8-32	Not Rated	Rockwell C47	ASME B18.8.2	97365A150	0000
2"	0.0001" to 0.0003"									8-32	Not Rated	Rockwell C47	ASME B18.8.2	97365A160	0000
2 1/2"	0.0001" to 0.0003"									8-32	Not Rated	Rockwell C47	ASME B18.8.2	97365A170	0000




										5/16" Diameter

										3/4"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	97365A180	0000


										1"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	97365A190	0000
										1 1/4"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	97365A200	0000
										1 1/2"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	97365A210	0000
										2"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	97365A222	00000
										2 1/2"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	97365A240	00000




										3/8" Diameter

										1"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	97365A250	00000


										1 1/4"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	97365A260	00000
										1 1/2"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	97365A270	00000
										2"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	97365A290	00000
										2 1/2"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	97365A310	00000
										3"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	97365A320	00000




										1/2" Diameter

										1"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	97365A330	00000


										1 1/4"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	97365A340	00000
										1 1/2"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	97365A350	00000
										1 3/4"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	97365A360	00000
										2"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	97365A370	00000
										2 1/2"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	97365A390	00000
										3"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	97365A400	00000




							5/8" Diameter

							1 1/2"				0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	97365A430	00000


							2"	0.0001" to 0.0003"			1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	97365A440	00000
							3"	0.0001" to 0.0003"	1/4"-20		Not Rated	Rockwell C47	ASME B18.8.2	97365A470	00000




									3/4" Diameter

									2"		0.0001" to 0.0003"	5/16"-18	Not Rated	Rockwell C47	ASME B18.8.2	97365A500	00000


									3"		0.0001" to 0.0003"	5/16"-18	Not Rated	Rockwell C47	ASME B18.8.2	97365A510	00000




									1" Diameter

									2"		0.0001" to 0.0003"	5/16"-18	Not Rated	Rockwell C47	—	97365A530	00000


									3"		0.0001" to 0.0003"	5/16"-18	Not Rated	Rockwell C47	—	97365A620	00000




												4 mm Diameter

		16 mm										0.004 mm to 0.015 mm	M3 × 0.5 mm	101,000	Rockwell C18	DIN 7979C-m6	98432A111	0000


		20 mm	0.004 mm to 0.015 mm									M3 × 0.5 mm	101,000	Rockwell C18	DIN 7979C-m6	98432A112	00000




												5 mm Diameter

												10 mm	0.004 mm to 0.015 mm	M3 × 0.5 mm	101,000	Rockwell C18	DIN 7979C-m6	98432A113	0000


												24 mm	0.004 mm to 0.015 mm	M3 × 0.5 mm	101,000	Rockwell C18	DIN 7979C-m6	98432A114	00000




												6 mm Diameter

												16 mm	0.004 mm to 0.015 mm	M4 × 0.7 mm	101,000	Rockwell C18	DIN 7979C-m6	98432A115	00000


												24 mm	0.004 mm to 0.015 mm	M4 × 0.7 mm	101,000	Rockwell C18	DIN 7979C-m6	98432A117	0000
												30 mm	0.004 mm to 0.015 mm	M4 × 0.7 mm	101,000	Rockwell C18	DIN 7979C-m6	98432A119	00000
												36 mm	0.004 mm to 0.015 mm	M4 × 0.7 mm	101,000	Rockwell C18	DIN 7979C-m6	98432A121	00000
												40 mm	0.004 mm to 0.015 mm	M4 × 0.7 mm	101,000	Rockwell C18	DIN 7979C-m6	98432A122	00000




													8 mm Diameter

										16 mm			0.006 mm to 0.015 mm	M5 × 0.8 mm	101,000	Rockwell C18	DIN 7979C-m6	98432A124	00000


										20 mm			0.006 mm to 0.015 mm	M5 × 0.8 mm	101,000	Rockwell C18	DIN 7979C-m6	98432A125	00000
										24 mm			0.006 mm to 0.015 mm	M5 × 0.8 mm	101,000	Rockwell C18	DIN 7979C-m6	98432A126	00000
										30 mm			0.006 mm to 0.015 mm	M5 × 0.8 mm	101,000	Rockwell C18	DIN 7979C-m6	98432A127	00000
										40 mm			0.006 mm to 0.015 mm	M5 × 0.8 mm	101,000	Rockwell C18	DIN 7979C-m6	98432A128	00000
							50 mm			0.006 mm to 0.015 mm			M5 × 0.8 mm	101,000	Rockwell C18	DIN 7979C-m6	98432A129	00000
							60 mm	0.006 mm to 0.015 mm		M5 × 0.8 mm			101,000	Rockwell C18	DIN 7979C-m6	98432A131	00000
							100 mm	0.006 mm to 0.015 mm		M5 × 0.8 mm			101,000	Rockwell C18	DIN 7979C-m6	98432A132	00000




										10 mm Diameter

										20 mm			0.006 mm to 0.015 mm	M6 × 1 mm	101,000	Rockwell C18	DIN 7979C-m6	98432A133	00000


40 mm	0.006 mm to 0.015 mm									M6 × 1 mm			101,000	Rockwell C18	DIN 7979C-m6	98432A137	00000
60 mm	0.006 mm to 0.015 mm									M6 × 1 mm			101,000	Rockwell C18	DIN 7979C-m6	98432A139	00000
80 mm	0.006 mm to 0.015 mm									M6 × 1 mm			101,000	Rockwell C18	DIN 7979C-m6	98432A141	00000




										12 mm Diameter

									24 mm	0.007 mm to 0.018 mm			M6 × 1 mm	101,000	Rockwell C18	DIN 7979C-m6	98432A142	00000


									40 mm	0.007 mm to 0.018 mm	M6 × 1 mm		101,000	Rockwell C18	DIN 7979C-m6	98432A145	00000
									50 mm	0.007 mm to 0.018 mm	M6 × 1 mm		101,000	Rockwell C18	DIN 7979C-m6	98432A146	00000
									80 mm	0.007 mm to 0.018 mm	M6 × 1 mm		101,000	Rockwell C18	DIN 7979C-m6	98432A148	00000

Pin Removal Tools

		Each
Puller Handle	92330A300	000000
Tip for 3/16"-5/8" (6-12 mm) Diameter Pin	92330A411	00000
Tip for 3/4"-1-1/2" (13-20 mm) Diameter Pin	92330A511	00000
Extension (5 1/2" Overall Length)	92330A220	00000

Spiral Shaft

For a more secure hold under vibration than flat-shaft pins, the spiral makes 360° contact with the hole.

Material Certificate—Pins include a report with a traceable lot number and a description of their chemical, physical, and mechanical properties.

	Lg.	Dia. Tolerance	Thread Size	Double Shear Breaking Strength, lbf	Min. Hardness	Specs. Met	Certificate Type		Each
High-Strength Alloy Steel







				1/4" Diameter

				3/4"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	—	97352A110	00000


				1"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	—	97352A120	0000
				1 1/4"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	—	97352A130	0000
				1 1/2"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	—	97352A140	0000
				2"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	—	97352A160	0000
				2 1/2"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	—	97352A170	0000




						5/16" Diameter

						3/4"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	—	97352A180	0000


						1"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	—	97352A190	0000
						1 1/4"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	—	97352A200	0000
						1 1/2"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	—	97352A210	0000
						2"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	—	97352A220	0000
						2 1/2"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	—	97352A240	0000




								3/8" Diameter

								1"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	—	97352A250	0000


								1 1/4"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	—	97352A260	0000
								1 1/2"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	—	97352A270	0000
								1 3/4"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	—	97352A280	0000
								2"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	—	97352A290	0000
								2 1/4"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	—	97352A300	0000
								2 1/2"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	—	97352A310	0000
								3"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	—	97352A320	0000




										1/2" Diameter

										1"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	—	97352A330	0000


										1 1/4"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	—	97352A340	0000
										1 1/2"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	—	97352A350	0000
										1 3/4"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	—	97352A360	0000
										2"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	—	97352A370	0000
										2 1/4"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	—	97352A380	0000
										2 1/2"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	—	97352A390	0000
										3"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	—	97352A400	0000
										3 1/2"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	—	97352A410	0000




										5/8" Diameter

		1 1/2"	0.0001" to 0.0003"							1/4"-20	39,000	Rockwell C47	ASME B18.8.2	—	97352A430	0000


		2"	0.0001" to 0.0003"							1/4"-20	39,000	Rockwell C47	ASME B18.8.2	—	97352A440	0000
		2 1/4"	0.0001" to 0.0003"							1/4"-20	39,000	Rockwell C47	ASME B18.8.2	—	97352A480	0000
		2 1/2"	0.0001" to 0.0003"							1/4"-20	39,000	Rockwell C47	ASME B18.8.2	—	97352A460	00000
		3"	0.0001" to 0.0003"							1/4"-20	39,000	Rockwell C47	ASME B18.8.2	—	97352A470	00000




										3/4" Diameter

				2"						0.0001" to 0.0003"	5/16"-18	57,000	Rockwell C47	ASME B18.8.2	—	97352A490	00000


				2 1/2"	0.0001" to 0.0003"					5/16"-18	57,000	Rockwell C47	ASME B18.8.2	—	97352A500	00000
				3"	0.0001" to 0.0003"					5/16"-18	57,000	Rockwell C47	ASME B18.8.2	—	97352A510	00000
				4"	0.0001" to 0.0003"					5/16"-18	57,000	Rockwell C47	ASME B18.8.2	—	97352A570	00000




										1" Diameter

										2"	0.0001" to 0.0003"	3/8"-16	102,000	Rockwell C47	ASME B18.8.2	—	97352A530	00000


						3"	0.0001" to 0.0003"			3/8"-16	102,000	Rockwell C47	ASME B18.8.2	—	97352A550	00000
						4"	0.0001" to 0.0003"			3/8"-16	102,000	Rockwell C47	ASME B18.8.2	—	97352A580	00000


						18-8 Stainless Steel







												1/4" Diameter

												3/4"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A610	0000


								1"	0.0001" to 0.0003"			8-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A620	0000
								1 1/4"	0.0001" to 0.0003"			8-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A630	0000
								1 1/2"	0.0001" to 0.0003"			8-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A640	0000
								2"	0.0001" to 0.0003"			8-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A650	0000
								2 1/2"	0.0001" to 0.0003"			8-32	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97352A660	0000




												5/16" Diameter

												3/4"	0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A670	0000


												1"	0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A680	0000
1 1/4"												0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A690	0000
1 1/2"	0.0001" to 0.0003"											10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A710	0000
2"	0.0001" to 0.0003"											10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A720	0000




												3/8" Diameter

												1"	0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A730	0000


												1 1/4"	0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A740	0000
		1 1/2"										0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A750	0000
		1 3/4"	0.0001" to 0.0003"									10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A760	0000
		2"	0.0001" to 0.0003"									10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A770	0000
		2 1/4"	0.0001" to 0.0003"									10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A780	0000
		2 1/2"	0.0001" to 0.0003"									10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A790	0000
		3"	0.0001" to 0.0003"									10-32	Not Rated	Not Rated	ASME B18.8.2	—	97352A810	00000




												1/2" Diameter

				1"								0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97352A820	0000


				1 1/4"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97352A830	0000
				1 1/2"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97352A840	0000
				1 3/4"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97352A850	0000
				2"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97352A860	0000
				2 1/4"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97352A870	0000
				2 1/2"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97352A880	00000
				3"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97352A890	00000
				3 1/2"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97352A910	00000




						5/8" Diameter

						1 1/2"	0.0001" to 0.0003"					1/4"-20	Not Rated	Not Rated	ASME B18.8.2	—	97352A920	0000


						2"	0.0001" to 0.0003"			1/4"-20	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97352A930	00000
						2 1/4"	0.0001" to 0.0003"			1/4"-20	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97352A940	00000
						2 1/2"	0.0001" to 0.0003"			1/4"-20	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97352A950	00000
						3"	0.0001" to 0.0003"			1/4"-20	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97352A960	00000




										3/4" Diameter

										2"	0.0001" to 0.0003"	5/16"-18	Not Rated	Not Rated	ASME B18.8.2	—	97352A970	00000


								2 1/2"	0.0001" to 0.0003"	5/16"-18	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97352A971	00000
								3"	0.0001" to 0.0003"	5/16"-18	Not Rated	Not Rated	ASME B18.8.2	Material Certificate	97352A972	00000
								4"	0.0001" to 0.0003"	5/16"-18	Not Rated	Not Rated	ASME B18.8.2	—	97352A973	00000




										1" Diameter

										2"	0.0001" to 0.0003"	3/8"-16	Not Rated	Not Rated	—	—	97352A974	00000


3"	0.0001" to 0.0003"									3/8"-16	Not Rated	Not Rated	—	—	97352A975	00000
4"	0.0001" to 0.0003"									3/8"-16	Not Rated	Not Rated	—	—	97352A976	00000

Pin Removal Tools