Venting Cam Locks | McMaster-Carr

Filter by

Material

Coupling Size

Pipe Size

Gender

Fitting Type

Fitting Connection

Shape

Compatible With

Andrews Cam-and-Groove

Dixon Cam-and-Groove

Ever-Tite Cam-and-Groove

PT Coupling Cam-and-Groove

For Use With

Socket ID

Maximum Pressure @ Temperature

REACH

RoHS

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Finish

Length

Hose ID

Dash Size

Hose Material

37 Products

About Measuring Fittings

Measure the threaded ends of your fittings to identify their pipe size, thread size, schedule, and thread type. Then, find compatible components.

Metal Cam-and-Groove Hose Couplings for Chemicals and Petroleum

Made of metal, these couplings have better durability than plastic cam-and-groove couplings. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug. Couplings are compatible with Andrews, Dixon, Ever-Tite, and PT cam-and-groove couplings.

316 stainless steel fittings have excellent corrosion resistance.

Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.

Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.

Straight Safety-Venting Sockets with Locking Levers, NPT Male Threaded Pipe

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -40° to 200° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Sockets with male threaded end are also known as B couplers.

Safety-venting sockets and safety-venting caps prevent hose whip if you disconnect your hose under pressure. Two spring-loaded tabs on these sockets hold the plug while the pressure releases. After pressure is released, squeeze the tabs to release the plug.

Sockets with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Sockets									Replacement Gaskets			Replacement Levers		Protective Plugs
Coupling Size	Socket ID	Pipe Size	Dash Size	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each		Each
316 Stainless Steel with 316 Stainless Steel Levers
2	2 1/2"	2	32	2	Chrome-Plated Steel	125 psi @ 72° F	5803N11	0000000	10	5345K15	00000	5890N24	000000	5948N11	000000
3	3 5/8"	3	48	2	Chrome-Plated Steel	100 psi @ 72° F	5803N12	000000	10	5345K17	00000	5890N25	00000	5948N12	00000
4	4 3/4"	4	64	2	Chrome-Plated Steel	75 psi @ 72° F	5803N13	000000	10	5345K18	00000	5890N25	00000	5948N13	00000

Straight Safety-Venting Sockets with Locking Levers, NPT Female Threaded Pipe

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -40° to 200° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Straight sockets with female threaded end are also known as D couplers.

Sockets with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Sockets									Replacement Gaskets			Replacement Levers		Protective Plugs
Coupling Size	Socket ID	Pipe Size	Dash Size	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each		Each
316 Stainless Steel with 316 Stainless Steel Levers
2	2 1/2"	2	32	2	Chrome-Plated Steel	125 psi @ 72° F	5803N17	0000000	10	5345K15	00000	5890N24	000000	5948N11	000000
3	3 5/8"	3	48	2	Chrome-Plated Steel	100 psi @ 72° F	5803N18	000000	10	5345K17	00000	5890N25	00000	5948N12	00000
4	4 3/4"	4	64	2	Chrome-Plated Steel	75 psi @ 72° F	5803N19	000000	10	5345K18	00000	5890N25	00000	5948N13	00000

Straight Safety-Venting Sockets with Locking Levers, Barbed Hose

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -40° to 200° F
Attachment Type: Use Band-and-Buckle Clamps
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Straight sockets with barbed end are also known as C couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.

Sockets with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Sockets									Replacement Gaskets			Replacement Levers		Protective Plugs
Coupling Size	Socket ID	For Hose ID	Dash Size	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each		Each
316 Stainless Steel with 316 Stainless Steel Levers
2	2 1/2"	2"	32	2	Chrome-Plated Steel	125 psi @ 72° F	5803N14	0000000	10	5345K15	00000	5890N24	000000	5948N11	000000
3	3 5/8"	3"	48	2	Chrome-Plated Steel	100 psi @ 72° F	5803N15	000000	10	5345K17	00000	5890N25	00000	5948N12	00000
4	4 3/4"	4"	64	2	Chrome-Plated Steel	75 psi @ 72° F	5803N16	000000	10	5345K18	00000	5890N25	00000	5948N13	00000

Safety-Venting Caps with Locking Levers

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -40° to 200° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Sockets with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Sockets							Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
316 Stainless Steel with 316 Stainless Steel Levers
2	2 1/2"	2	Chrome-Plated Steel	125 psi @ 72° F	5803N21	0000000	10	5345K15	00000	5890N24	000000
3	3 5/8"	2	Chrome-Plated Steel	100 psi @ 72° F	5803N22	000000	10	5345K17	00000	5890N25	00000
4	4 3/4"	2	Chrome-Plated Steel	75 psi @ 72° F	5803N23	000000	10	5345K18	00000	5890N25	00000

Metal Cam-and-Groove Hose Couplings for Water

A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug.

Aluminum couplings are lighter in weight than brass plugs and sockets. They have good abrasion and corrosion resistance thanks to their anodized finish.

Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.

Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.

Straight Safety-Venting Sockets with Locking Levers, NPT Male Threaded Pipe

Maximum Pressure: See table
Temperature Range: -40° to 200° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Couplings with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Sockets with male threaded end are also known as B couplers.

Use safety-venting sockets and caps to prevent the hose from whipping under pressure as you disconnect it. They have two spring-loaded tabs that grab the plug, so you can open the levers to relieve pressure while the hose stays connected. After releasing the pressure, squeeze the tabs to disconnect the plug.

Sockets
			Levers						Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	Pipe Size	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Anodized Aluminum
2	2 1/2"	2	2	316 Stainless Steel	Chrome-Plated Steel	125 psi @ 72° F	5890N11	0000000	10	5345K15	00000	5890N24	000000
3	3 5/8"	3	2	316 Stainless Steel	Chrome-Plated Steel	100 psi @ 72° F	5890N12	000000	10	5345K17	00000	5890N25	00000
4	4 3/4"	4	2	316 Stainless Steel	Chrome-Plated Steel	75 psi @ 72° F	5890N13	000000	10	5345K18	00000	5890N25	00000

Protective Plug for 3 Coupling Size Sockets	2084T863	Each	000000
Protective Plug for 2 Coupling Size Sockets	2084T764	Each	00000
Protective Plug for 4 Coupling Size Sockets	2084T926	Each	00000

Straight Safety-Venting Sockets with Locking Levers, NPT Female Threaded Pipe

Maximum Pressure: See table
Temperature Range: -40° to 200° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Couplings with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Straight sockets with female threaded end are also known as D couplers.

Sockets
			Levers						Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	Pipe Size	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Anodized Aluminum
2	2 1/2"	2	2	316 Stainless Steel	Chrome-Plated Steel	125 psi @ 72° F	5890N17	0000000	10	5345K15	00000	5890N24	000000
3	3 5/8"	3	2	316 Stainless Steel	Chrome-Plated Steel	100 psi @ 72° F	5890N18	000000	10	5345K17	00000	5890N25	00000
4	4 3/4"	4	2	316 Stainless Steel	Chrome-Plated Steel	75 psi @ 72° F	5890N19	000000	10	5345K18	00000	5890N25	00000

Protective Plug for 3 Coupling Size Sockets	2084T863	Each	000000
Protective Plug for 4 Coupling Size Sockets	2084T926	Each	00000
Protective Plug for 2 Coupling Size Sockets	2084T764	Each	00000

Straight Safety-Venting Sockets with Locking Levers, Barbed Hose

Maximum Pressure: See table
Temperature Range: -40° to 200° F
Attachment Type: Use Band-and-Buckle Clamps
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Couplings with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Straight sockets with barbed end are also known as C couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.

Sockets
			Levers						Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	For Hose ID	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Anodized Aluminum
2	2 1/2"	2"	2	316 Stainless Steel	Chrome-Plated Steel	125 psi @ 72° F	5890N14	0000000	10	5345K15	00000	5890N24	000000
3	3 5/8"	3"	2	316 Stainless Steel	Chrome-Plated Steel	100 psi @ 72° F	5890N15	000000	10	5345K17	00000	5890N25	00000
4	4 3/4"	4"	2	316 Stainless Steel	Chrome-Plated Steel	75 psi @ 72° F	5890N16	000000	10	5345K18	00000	5890N25	00000

Protective Plug for 2 Coupling Size Sockets	2084T764	Each	000000
Protective Plug for 4 Coupling Size Sockets	2084T926	Each	00000
Protective Plug for 3 Coupling Size Sockets	2084T863	Each	00000

Safety-Venting Caps with Locking Levers

Maximum Pressure: See table
Temperature Range: -40° to 200° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Couplings with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Caps
		Levers						Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Anodized Aluminum
2	2 1/2"	2	316 Stainless Steel	Chrome-Plated Steel	125 psi @ 72° F	5890N21	0000000	10	5345K15	00000	5890N24	000000
3	3 5/8"	2	316 Stainless Steel	Chrome-Plated Steel	100 psi @ 72° F	5890N22	000000	10	5345K17	00000	5890N25	00000
4	4 3/4"	2	316 Stainless Steel	Chrome-Plated Steel	75 psi @ 72° F	5890N23	000000	10	5345K18	00000	5890N25	00000

6" Retaining Chain	2084T629	Each	00000
12" Retaining Chain	2084T673	Each	0000