We will reply to your message within an hour.
More
Protect against excess vacuum and pressure in cylinders, gear boxes, enclosures, manifolds, and tanks.
Shield outdoor pipe and tank openings from the environment. Also known as vent caps, these breather vents have screens to allow air flow while blocking debris.
These breather vents withstand corrosion in damp environments.
These breather vents are rated NEMA 6 to withstand periodic submersion in water.
Secure access to vented openings in pipe and tanks—the cap can be locked to prevent tampering.
Add a filling port to your hydraulic tank while protecting against excess pressure and vacuum.
Minimize moisture buildup in enclosures. Also known as drain plugs, these breather vents have a small outlet that allows condensation to drain.
Keep moisture, dirt, and debris from entering your oil reservoirs.
Use these mufflers with air-powered tools, valves, and cylinders to reduce noise and filter exhaust fumes.
A small hex size makes these high-flow mufflers a great fit for cramped spaces.
Commonly used with high-flow, air-powered equipment, such as diaphragm pumps and valves, these mufflers reduce noise and filter exhaust fumes without restricting flow.
Adjust the flow by turning the screw. Use these mufflers with air-powered tools and cylinders to reduce noise and filter exhaust fumes.
Made entirely of stainless steel, these mufflers stand up to harsh, corrosive environments.
In addition to a filter, these mufflers have a wool felt disc to trap oil mist.
These mufflers can be cleaned for an extended service life.
Replace your muffler less often—these have a filter design that stays clean longer than porous mufflers.
With a threaded connection on both ends, these mufflers can be installed anywhere in your line.
These mufflers exhaust through narrow holes on one end to provide a concentrated blast of air. Use them to eject items from your conveyor and direct exhaust away from delicate applications.
Also known as reclassifiers, these mufflers have a clear reservoir with a drain plug to remove and store oil mist for reuse.
Install these mufflers in air-powered drills and other loud equipment. They filter exhaust fumes and reduce noise by 30 dB, a reduction that's equivalent to putting in earplugs.
With a threaded connection on both ends, these mufflers can be installed anywhere in your line. They reduce noise by up to 45 dB.
Suitable for use with welding equipment, these mufflers are made of flame-resistant materials. They reduce noise by 35 dB.
Don’t let an unexpected clog interrupt your work. These mufflers have a filter that slides up slowly as it clogs to indicate when the muffler should be replaced. They reduce noise by 30-35 dBA
Purify exhaust fumes while silencing the noise from your oil-free high-vacuum pumps.
Less than a quarter of the height of standard pressure-relief valves, these are often installed on tanks in low-clearance areas.
For a low-pressure seal around plastic and soft metal tubing, these valves have push-to-connect fittings.
Design a valve specifically for your process media and set pressure. Choose from a valve for air, inert gas, water, hydraulic oil, fuel oil, gasoline, or diesel fuel and a set pressure.
The most basic option for air and inert gas applications.
Body is brass or nickel-plated brass. All meet ASME Code Section VIII for use with air and inert gas pressure vessels.
For corrosion resistance in wet conditions and harsh environments, these valves have a 303 stainless steel body. All meet ASME Code Section VIII for use with air and inert gas pressure vessels.
Change set pressure to suit your application—this valve includes four interchangeable color-coded springs with different set pressure ranges.
Commonly used with high-volume blowers, compressors, and air-powered conveyors, these valves quickly relieve a large amount of air in systems with a pipe size of 2 or greater.
These valves have a bronze body for durability and a long service life. All meet ASME Code Section VIII for use with air and inert gas pressure vessels.
Commonly used with high-volume blowers, compressors, and air-powered conveyors, these valves quickly relieve a large amount of air in systems with a pipe size of 2 or greater. All meet ASME Code Section VIII for use with air and inert gas pressure vessels.
With a 316 stainless steel body for exceptional corrosion resistance, these valves are often used in wet conditions and harsh environments. All meet ASME Code Section VIII for use with air and inert gas pressure vessels.
Attach a pressure gauge to the 1/4 NPT female port on these valves.