McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    11 Products

    Breather Vents

    Image of Product. Style A. Front orientation. Style A. Breather Vents.
    Image of Product. Style G. Front orientation. Style G. Breather Vents.
    Image of Product. Style F. Front orientation. Style G. Breather Vents.
    Image of Product. Style H. Front orientation. Style H. Breather Vents.

    Style A

    Style

    G

    Style F

    Style H

    Protect against excess vacuum and pressure in cylinders, gear boxes, enclosures, manifolds, and tanks. You can also use these breather vents to block debris from entering equipment.
    Style G—Style G has a slotted drive for installation with a screwdriver.
    Style H—Style H has a Buna-N O-ring for extra protection against leaks.
    Style
    Thread
    Size
    Max. Flow Rate
    @ Pressure
    Max. Pressure,
    psi
    Max. Temp.,
    ° F
    Ht.
    Dia.
    For Use With
    Removes Particle
    Size Down To, μm
    Each
    UNF Male
     
    316 Stainless Steel Body and Fitting
    G10-32
    		10 scfm @ 100 psi1007507/16"3/16"Air, Inert Gas108584T31000000
     
    Brass Body and Fitting
    A10-32
    		6 scfm @ 100 psi1503003/8"—Air, Inert Gas909833K180000
    H10-32
    		1 scfm @ 100 psi1252007/16"—Air, Inert Gas408556T240000
     

    Washdown Weather Resistant Breather Vents

    These breather vents are rated NEMA 6 to withstand periodic submersion in water. Install them in enclosures to stop the buildup of pressure and vacuum and to prevent debris from entering equipment. Breather vents can be used with enclosures that are rated NEMA 4, 12, and 13 for washdown environments and splashing oil and coolant.
    Threaded UNF Male
    Image of Product. Bottom orientation. Breather Vents. Washdown Weather Resistant Breather Vents, Threaded UNF Male, Aluminum Body.

    Aluminum

    Body

    Thread
    Size
    Max. Flow Rate
    @ Pressure
    Max. Pressure,
    psi
    Max. Temp.,
    ° F
    Ht.
    Dia.
    For Use
    With
    Environment
    Enclosure
    Rating
    O-Ring
    Material
    Removes Particle
    Size Down To, μm
    Each
    Aluminum Body and Fitting
    10-32
    		Not Rated1.41581/4"3/8"AirDusty, Outdoor, Submersible, Washdown, WetNEMA 6
    		EPDM
    		31226T15000000
     

    Corrosion Resistant Breather Vents

    These breather vents withstand corrosion in damp environments. Use them to prevent excess vacuum and pressure in cylinders, gear boxes, and tanks and to block debris from entering equipment.
    Threaded UNF Male
    Image of Product. 303 Stainless Steel. Front orientation. Breather Vents. Corrosion Resistant Breather Vents, Threaded UNF Male, 303 Stainless Steel Body.
    Image of Product. 316 Stainless Steel. Front orientation. Breather Vents. Corrosion Resistant Breather Vents, Threaded UNF Male, 316 Stainless Steel Body.

    303 Stainless

    Steel

    316 Stainless

    Steel

    303 Stainless Steel Body and Fitting—Stainless steel breather vents stand up to higher temperatures than polyethylene breather vents.
    316 Stainless Steel Body and Fitting—316 stainless steel breather vents resist corrosion better than 303 and 304 stainless steel breather vents and stand up to higher temperatures than polyethylene breather vents.
    Viton® Fluoroelastomer O-Ring—Those with a Viton® Fluoroelastomer O-ring offer extra protection against leaks.
    Thread
    Size
    Max. Flow Rate
    @ Pressure
    Max. Pressure,
    psi
    Max. Temp.,
    ° F
    Ht.
    For Use With
    O-Ring Material
    Removes Particle
    Size Down To, μm
    Each
    303 Stainless Steel Body and Fitting
    10-32
    		Not Rated2504007/16"Air, Inert GasViton® Fluoroelastomer
    		408556T25000000
     
    316 Stainless Steel Body and Fitting
    10-32
    		Not Rated2504007/16"Air, Inert GasViton® Fluoroelastomer
    		408556T2600000
     

    Mufflers

    Image of Product. Style A. Front orientation. Mufflers. Mufflers, Mufflers with Pipe Connection, Style A.
    Image of Product. Style D. Front orientation. Mufflers. Mufflers, Mufflers with Pipe Connection, Style D.
    Image of Product. Style E. Front orientation. Mufflers. Mufflers, Mufflers with Pipe Connection, Style E.

    Style A

    Style

    D

    Style

    E

    Use these mufflers with air-powered tools, valves, and cylinders to reduce noise and filter exhaust fumes.
    Mufflers with Pipe Connection
    Image of Product. Style A. Front orientation. Mufflers. Mufflers, Mufflers with Pipe Connection, Style A.
    Image of Product. Style D. Front orientation. Mufflers. Mufflers, Mufflers with Pipe Connection, Style D.
    Image of Product. Style E. Front orientation. Mufflers. Mufflers, Mufflers with Pipe Connection, Style E.

    Style A

    Style

    D

    Style

    E

    Styles D and E—Styles D and E have a rubber O-ring for extra protection against leaks.
    Bronze Body—Brass, bronze, and copper mufflers offer good corrosion resistance.
    316 Stainless Steel Body—316 stainless steel mufflers offer excellent corrosion resistance.
    Each
    Thread
    Size
    Max. Flow Rate
    @ Pressure
    Max. Pressure,
    psi
    Max. Temp.,
    ° F
    Ht.
    For Use With
    Removes Particle
    Size Down To, μm
    Noise Reduction
    Rating
    1-24
    25-99
    100-Up
    Style A
     
    UNF Threaded Male Nickel-Plated Steel Fitting—Bronze Body
    10-32
    		6 scfm @ 100 psi30030011/16"Air, Inert Gas4015 dB to 20 dB4450K31000000000000000
     
    Style D
     
    UNF Threaded Male Brass Fitting—Bronze Body
    10-32
    		5 scfm @ 100 psi1252005/8"Air, Inert Gas4017 dBA to 22 dBA8226T110000000000000
     
    Style E
     
    UNF Threaded Male Brass Fitting—Bronze Body
    10-32
    		5 scfm @ 100 psi1252001"Air, Inert Gas401 dBA to 8 dBA8226T13000000000000
     
    UNF Threaded Male 303 Stainless Steel Fitting—316 Stainless Steel Body
    10-32
    		5 scfm @ 100 psi3003001 1/16"Air, Inert Gas4017 dBA to 22 dBA8226T16000000000000000
     

    Easy-Clean Mufflers

    Image of Product. Style A. Front orientation. Mufflers. Easy-Clean Mufflers, UNF Male Polyethylene Fitting, Style A.

    Style

    A

    These mufflers can be cleaned for an extended service life. Use them with air-powered tools, valves, and cylinders to reduce noise and filter exhaust fumes.
    UNF Male Polyethylene Fitting
    Image of Product. Style A. Front orientation. Mufflers. Easy-Clean Mufflers, UNF Male Polyethylene Fitting, Style A.

    Style

    A

    Style
    Thread
    Size
    Max. Flow Rate
    @ Pressure
    Max. Pressure,
    psi
    Max. Temp.,
    ° F
    Ht.
    Dia.
    For Use With
    Removes Particle
    Size Down To, μm
    Noise Reduction
    Rating, dBA
    Filter
    Material
    Each
    A10-32
    		0.7 scfm @ 100 psi15015015/16"5/16"Air, Inert Gas8020 to 30Polyethylene4427K6900000
    back to top