Pull and tow loads without marring nearby surfaces. With more than twice as many individual wires as standard options, this wire rope is easier to bend and wind onto winches and drums without wear. The plastic coating protects the inner wires from corrosion and damage, while shielding nearby objects from scratches. All rope is manufactured in the U.S.

Warning: Not for overhead lifting.

Secure tools, equipment, and components to anchor points without slack buildup. These retractable lanyards have looped ends on both sides. The galvanized steel cable with zinc-plated steel eyes resists corrosion in wet and outdoor environments.

Warning: Not for lifting.

Clear Vinyl Plastic Coated—A vinyl jacket protects surfaces from scratching. Rated for use from -40° to 170° F, suitable for cold storage or moderate-heat environments.

For a snug fit around objects of different sizes and shapes, adjust the cinching collar on these locks to lengthen or shorten the cable. Because you can adjust the length, there’s no need to loop the cable around several times. Made of strong, flexible braided steel, the cable easily bends around or through equipment and tools. It’s coated with vinyl, so it stands up to weather and won’t scratch what it’s wrapped around.

Choose these locks if you need ones that each open with a different key. The attached pin tumbler lock is more difficult to pick than a wafer lock.

No more misplaced keys—these resettable cable locks open with a combination. Use them to secure tools, gates, and irregularly shaped objects. The cable has a weather-resistant vinyl coating that protects equipment from scratches. You can set your own combination and change it any time.

Keep tools and equipment tethered close with lanyards that retract when not in use. These galvanized steel, 7 × 7 construction lanyards reduce drop hazards in elevated work areas. The zinc-plated copper sleeve resists corrosion in damp or chemically active environments where bare steel would degrade.

Warning: Not for lifting.

Clear Vinyl Plastic Coated—For applications where the cable contacts painted surfaces or delicate finishes. The coating protects both the lanyard and the workpiece.

Similar to cable locks, except this lock has a cinching collar that allows you to tighten and loosen the cable around equipment. Choose this lock if you need several locks that open with the same key.

The body is weather-resistant aluminum. The cable has a vinyl coating to prevent scratches and add weather resistance.

Wrap around tools and equipment to prevent theft—no need for a padlock and cable. These locks have a strong, flexible steel cable attached. They’re difficult to pick, since they lock with a pin tumbler. For extra security, they’re also keyed differently, so you can’t open two of these locks with the same key. Their cable is vinyl coated to resist scratching and rusting in the rain.

Lock out most valves in your facility with just one device. These lockouts clamp onto a variety of valve handwheels and handles. They’re great for large levers, T-handles, wheels with odd shapes and sizes, and other handles that are hard to secure with specialized lockouts. However, they’re slower to install than specialized lockouts—you’ll have to configure different attachments depending on your handle type. These lockouts help you comply with OSHA 29 CFR 1910.147 requirements for the control of hazardous energy.

To install, first turn your handle to the off position. After assembling your lockout with all necessary attachments, clamp the body to your handle and turn the lockout wheel to tighten. Add a padlock to prevent removal of the lockout.

Each lockout comes with a blocking arm. Wedge the arm against a pipe or other surface in the direction the handle turns in—this will block its movement. If your handle turns in either direction, attach an additional blocking arm (sold separately).

For valve handles that turn with a squeeze trigger, clamp the lockout body to the handle so it wedges between the handle and the trigger.

For handwheels, clamp the lockout body to the edge of the wheel and run the included cable through the spokes and around a nearby pipe or surface. Then pull the cable through the lockout body for a tight hold.