Heaters are fiberglass-reinforced silicone rubber.

For applications requiring high heat over long periods of time, these aluminized steel heaters warm up faster and are more durable than silicone rubber heaters.

To prevent hot spots that can damage heat-sensitive materials such as adhesives, sealants, and food, these heaters warm the air around containers without touching them.

An adjustable thermostat senses the container’s surface temperature to automatically control heat output.

Also known as foil heaters, these bend around corners and edges without causing damage to the heating element.

Attach to flat metal surfaces.

Turn the dial to control the percentage of time that these heaters cycle on, from 5% to 100%. Commonly used to thaw pipes, prevent valves from freezing, and heat beakers and flasks in labs, they're good for temporary and occasional use where rapid heating is required but precise temperature control is not.

These heaters require a separate temperature switch or controller to regulate heat output.

These heaters require a power-connection kit.

Rated for a maximum heat output of 900° F, these heaters are often used for thawing frozen pipes and rapid spot heating.

Often used for temporary heating in sinks and pails, these heaters have a circular base that sits at the bottom of containers. Remove them from the container after heating its contents.

Efficiently heat liquid in small containers.

Sized to fit drums, these heaters have a bracket to hook on the side of drums and in bung openings.

Bolt the flange to a matching flange welded on a container wall.

A replaceable fuse cuts off power if the heating element reaches 190° F to prevent burnout and premature failure. Bolt the flange to the top of containers.

Install these heaters into threaded container openings or pipe couplings to quickly and efficiently heat liquid through direct contact. The heating element is Incoloy for excellent resistance to harsh chemicals.

Form these heaters into any shape and install them through container walls with the attached bulkhead fittings.

Also known as circulation heaters, these install directly into pipelines.

Protect equipment in enclosures from freezing, humidity, and condensation buildup that can cause damage and lead to premature failure.

Often used to recirculate hot water in process baths and sinks, these lightweight heater/recirculators boost water temperature on the go.

An adjustable thermostat automatically turns the heater on when the temperature drops below your set temperature and off when it rises above your set temperature.

Also known as cartridge heaters, insertion heaters install into drilled and reamed holes in metal parts for quick heating through direct contact.

A bonded-graphite coating acts as a dry lubricant to ease insertion and removal for cleaning.