These diaphragm pumps meter a consistent amount of liquid within ±2% of the maximum flow. Often used to pump water-treatment chemicals, cleaning fluids, and electropolishing solutions, they have an adjustment dial that alters flow rate in 2% increments of the maximum flow. Pumps are self-priming and create suction to draw liquid upward. They can run dry but are not for use with solids.

Repair Kits—Repair kits include a pump head assembly, a diaphragm, valves, and seals.

Automatically control output from a distance using 4-20 mA or external-pulse signals. View the flow rate on the backlit LCD. These diaphragm pumps meter a consistent amount of liquid within ±2% of the maximum flow. Often used to pump water-treatment chemicals, cleaning fluids, and electropolishing solutions, they have an adjustment dial that alters flow rate in 2% increments of the maximum flow. Pumps can run dry. Do not use with solids.

Repair Kits—Repair kits include a pump head assembly, a diaphragm, valves, and seals.

Inject chemicals into your water supply without using electricity—these pumps install directly in your pipeline and activate when water flows into the pump head. They provide consistent metering regardless of pressure and flow changes and have an adjustment dial for altering dosing concentration. Pumps are often used with bleach, cleaning solutions, and water-treatment chemicals. All are self-priming and create suction to draw liquid upward. Do not use with solids.

Install these pumps in a panel cutout. Often used in food and beverage, pharmaceutical, and lab applications, they dispense small amounts of liquid at a set rate. Pumps can be wired to a switch for manual operation, or a PLC for automated equipment. The removable pump head includes an intake tube that quickly connects to your line with barbed fittings (not included). To change lines, disconnect tubing and twist and pull the head off the motor. Then twist on a replacement head (sold separately). Pumps come in three colors for easy identification or to match your existing equipment. All are self-priming and create suction to draw liquid upward. Mount pumps up to 28 ft. above your liquid source. They can run dry.

Mount these diaphragm pumps in any position, even upside down. Pumps have a fractional horsepower motor rated for intermittent use (return to room temperature before restarting). They are for use in low-flow spraying, draining, and washdown applications. They are self-priming, which means they create a suction force to draw liquid upward. Pumps can run dry and do not require an initial fill, so they’re a good choice for applications without a constant flow of liquid. Do not use with solids.

Rated for liquids with a viscosity up to 5,000 centipoise, these pumps can be used with thick chemicals such as electropolishing solutions. An adjustment dial allows you to alter flow rate in 2.5% increments of the maximum flow without the hassle of changing tubing. Often used in boiler feed systems and water treatment, they're compatible with chemicals such as cleaning fluids and acid-washing solutions. Pumps are self-priming and create suction to draw liquid upward. They can run dry.

An adjustment dial with a locking lever allows for easy flow control. These metering diaphragm pumps can be used with pressures up to four times higher than standard chemical metering diaphragm pumps. They're often used for general purpose dispensing of chemicals such as ammonia and acid-washing solutions. The adjustment dial alters flow rate in 5% increments of the maximum flow. Pumps are self-priming and create suction to draw liquid upward. Do not run dry or use with solids.

Repair Kits—Repair kits include a pump head assembly, valves, a diaphragm, and mounting hardware.

A 316 stainless steel housing provides corrosion resistance for a long life in harsh environments. These diaphragm pumps meter a consistent amount of liquid within ±2% of the maximum flow. Often used to pump water-treatment chemicals, they have an adjustment dial that alters flow rate in 2% increments of the maximum flow. Pumps are self-priming and create suction to draw liquid upward. They can run dry. Do not use with solids.

Repair Kits—Repair kits include a pump head assembly, a diaphragm, valves, and seals.