We will reply to your message within an hour.
Seal brick, mortar, and concrete to prevent water damage. These coatings create a thin, clear layer that sits on the surface of masonry and repels water.
Hold back standing water. These coatings soak into the top layer of masonry to create a thick, waterproof seal rated up to 15 psi.
Repel spills and block stains without changing the look of fabric or upholstery.
Protect clothing, furniture, and other fabric with these oil- and water-repellent coatings. Also known as oleophobic and hydrophobic coatings, they work into a fabric’s individual fibers to repel liquid and grease.
Stop fabric from fading in the sun. These coatings also protect against spots, spills, and stains.
Also known as neatsfoot oil, use these to recondition, waterproof, and preserve leather.
The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.
No mixing required—these potting compounds come ready to apply.
Clear enough to read through, this UV-resistant potting compound allows optimal light transmission for use with LEDs, solar cells, and fiber optics.
This potting compound is formulated for use in sensitive applications such as manufacturing semiconductors.
Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation.
Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds.
Change the mix ratio of these heat-transfer potting compounds to achieve the right hardness for your application.
Dry to the touch in only 3 minutes, use this coating to protect circuit boards from moisture without delaying your process for drying.
This thermally conductive coating keeps electrical components cool by dissipating heat.
Thinner than potting compounds, these rigid and wear-resistant coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards.
This coating is formulated for use in sensitive applications such as manufacturing semiconductors.
Clear enough to read through, this coating allows optimal light transmission for use with LEDs, solar cells, and fiber optics.
These coatings require an ultraviolet curing lamp to reach full strength.
Protect sensitive electronic parts, enclosures, and prototypes from electromagnetic interference (EMI) with these coatings.
Prepare foam pipe insulation for use outdoors. These coatings provide a clean, moisture-resistant finish that protects insulation from UV and ozone damage.
These coatings provide chemical, corrosion, and impact resistance on grit-blasted concrete and primed steel in immersion, underground, and waste-water treatment applications.
Also known as coal tar epoxy, these coatings are our most resistant to abrasion, chemicals, and corrosion on concrete and steel. They can be immersed in salt water and fresh water.
Spray these coatings on glass to create a clear, scratch-resistant surface that repels oil and water. They’re also known as oleophobic and hydrophobic coatings.
Apply these wear-resistant coatings to wood to protect from scuffs, water, and oil damage.
Spray these coatings on grout to form a barrier against dirt, water, mildew, and discoloration.
Grit in these coatings provides traction and fills hairline cracks. Coatings form a weather- and water-resistant seal to protect and revitalize asphalt surfaces.
Protect and revitalize asphalt surfaces with these tar-free coatings that form a weather- and water-resistant seal.
These coatings reflect up to 60% of the sun's rays. They also restore and reinforce your roof by forming a water-resistant seal.
Made from silicone, these coatings are more durable than acrylic coatings for roofs and have better resistance to pooling water. They reflect up to 90% of the sun's rays to reduce cooling costs.
Use these coatings to form a water-resistant layer to restore and reinforce your roof.
Use these solvent-free, high-gloss coatings to protect concrete floors in enclosed areas. Durable enough for forklift traffic, they resist stains, moisture, and chemicals.
These coatings are NSF registered H1 for incidental food contact. Designed to protect food-processing equipment from corrosion after washdowns, use them to seal metal surfaces, resist moisture, and lubricate moving parts between processes.
These coatings are more durable than our standard coatings for concrete floors. They provide a stain-resistant finish that protects your floors from moisture, chemicals, foot traffic, and hand carts.
Reflect at least 85% of the sun's rays to reduce cooling costs. These coatings also restore and reinforce your roof by filling cracks and forming a water-resistant seal.
These coatings are often used on castings, dies, and mirrors to prevent rust, abrasion, and moisture penetration.
Protect brass, bronze, copper, and silver from moisture, chemicals, oxidation, and abrasion.
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.
Everything you need to repair cracked, worn, and damaged surfaces—even underwater.
An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.
Fill cracks with these coatings to stop leaks and deaden sound.
Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.
Waterproof and strong, these surface fillers remain flexible when repairing rips, tears, and holes in neoprene rubber. They're often used on wetsuits.
Stop leaks in metal tanks and equipment without draining the contents.
Seal leaks around small holes.
Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.
To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.
Stop leaks in metal tanks and equipment without draining the contents. Until a permanent repair can be made, rub these sticks into the leak to form a temporary seal.
These patching compounds are the most flexible and watertight we offer.
Roll out a fast fix for leaky roofs and gutters with these peel-and-stick rolls.
Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.
Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.
Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink.
Repair rips, split seams, and detached soles to stop leaks in shoes, boots, and waders.
Extend the life of your footwear with these abrasion- and water-resistant epoxies.
This caulk forms a long-lasting, flexible, watertight seal.
Wrap this tape tightly around pipe and other surfaces to seal cracks and joints without having to shut down your system.
Prevent the edges of tape, signs, and graphics from peeling by sealing out water and debris.
Prepare joints and surfaces to ensure proper sealant adhesion.
Form flexible water-resistant seals on metal, plastic, and rubber joints in heating, ventilation, air conditioning, and refrigeration applications.
These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.
The strongest submersible sealants we offer, these combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Designed to withstand extreme environments, these fluoroelastomer sealants have excellent resistance to harsh chemicals. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.
Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.
With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.
Make temporary waterproof seals that peel off when no longer needed.
Keep water out of single-ply PVC or TPO plastic membranes with these self-leveling sealants.
This tough, abrasion-resistant tape sticks to itself, so you can layer it over joints and seams to create an extra-strong bond. The thick adhesive conforms to fasteners and gaps to keep water out, even in extreme conditions.
Stop water penetration with this tacky, flexible tape. It conforms to irregular shapes and expands to fill gaps. Use it on freezers, windows, and in marine applications.
Patch and seal roofs, window frames, gutters, and vents with this conformable tape.
Often used for weatherstripping and sealing gaps around windows, doors, and hatches; this tough tape keeps out moisture, dirt, heat, and cold.
Also known as mastic tape, this tape is thicker than other electrical tape to cushion, insulate, and seal out moisture and environmental contaminants in electrical connections.
Apply this liquid for a skin-tight protective coating that insulates and resists moisture, acids, and corrosion.
Use this tape for a watertight bond on gutters, roofing membranes, and other building materials.