McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    166 Products

    Weld-On-Mount Pull Handles

    Image of Product. Style 1. Front orientation. Pull Handles and Knobs. Weld-On-Mount Pull Handles, Style 1—Round Grip.

    Style 1

    Image of Product. Style 2. Front orientation. Pull Handles and Knobs. Weld-On-Mount Pull Handles, Style 2—Round Grip.

    Style 2

    Image of Product. Style 3. Front orientation. Pull Handles and Knobs. Weld-On-Mount Pull Handles, Style 3—Oval Grip.

    Style 3

    These handles provide a stronger connection than those attached with screws or nuts. Use them to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.
    Oval Grip—Oval grips conform to your hand and offer more control than round grips.
    Round Grip—Round grips allow your hand to pivot in any direction.
    300 Series Stainless Steel, 303 Stainless Steel, and 304 Stainless Steel—Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
    Grip
    Mounting
    Plate
    Wd.
    Dia.
    Ht.
    Thk.
    Projection
    Pull
    Cap.
    Ht.
    Wd.
    Each
    Style 1—Round Grip
    Image of Product. Style 1. Front orientation. Pull Handles and Knobs. Weld-On-Mount Pull Handles, Style 1—Round Grip.

    Style 1

     
    300 Series Stainless Steel—Dull
    4 15/16"1/2"2 1/16"Not Rated7088A1000000
    6 5/16"1/2"2 1/16"Not Rated7088A200000
    7 7/8"1/2"2 1/16"Not Rated7088A300000
     
    303 Stainless Steel—Dull
    4 15/16"1/2"2 15/16"Not Rated1650A43600000
    4 15/16"1/2"4 5/16"Not Rated1650A43900000
    6 5/16"1/2"2 15/16"Not Rated1650A43700000
    6 5/16"1/2"4 5/16"Not Rated1650A44100000
    6 5/16"5/8"3 3/8"Not Rated1650A44300000
    6 5/16"5/8"4 15/16"Not Rated1650A44600000
    7 7/8"1/2"2 15/16"Not Rated1650A43800000
    7 7/8"1/2"4 5/16"Not Rated1650A44200000
    7 7/8"5/8"3 3/8"Not Rated1650A44400000
    7 7/8"5/8"4 15/16"Not Rated1650A44700000
    11 13/16"5/8"3 3/8"Not Rated1650A44500000
    11 13/16"5/8"4 15/16"Not Rated1650A44800000
     
    304 Stainless Steel—Dull
    2 1/2"5/16"1 3/8"Not Rated1650A30000
    3 7/16"5/16"1 3/8"Not Rated1650A4010000
    3 15/16"5/16"1 3/8"Not Rated1650A40000
    3 15/16"3/8"1 11/16"Not Rated1650A40200000
    4 15/16"3/8"1 11/16"Not Rated1650A500000
    4 15/16"5/8"2 5/16"Not Rated1650A600000
    6 5/16"3/8"1 11/16"Not Rated1650A40300000
    6 5/16"5/8"2 5/16"Not Rated1650A40400000
    7 7/8"5/8"2 5/16"Not Rated1650A40500000
    7 7/8"13/16"2 11/16"Not Rated1650A700000
    9 7/8"13/16"2 11/16"Not Rated1650A40600000
     
    Steel—Dull
    2 1/2"5/16"1 3/8"Not Rated1650A4070000
    3 7/16"5/16"1 3/8"Not Rated1650A4080000
    3 15/16"5/16"1 3/8"Not Rated1650A4090000
    3 15/16"3/8"1 11/16"Not Rated1650A4110000
    4 15/16"3/8"1 11/16"Not Rated1650A4120000
    4 15/16"1/2"2"Not Rated1650A41400000
    4 15/16"5/8"2 5/16"Not Rated1650A41700000
    6 5/16"3/8"1 11/16"Not Rated1650A41300000
    6 5/16"1/2"2"Not Rated1650A41500000
    6 5/16"5/8"2 5/16"Not Rated1650A41800000
    7 7/8"1/2"2"Not Rated1650A41600000
    7 7/8"5/8"2 5/16"Not Rated1650A41900000
    7 7/8"13/16"2 11/16"Not Rated1650A42100000
    7 7/8"1"4 5/16"Not Rated1650A42500000
    9 7/8"13/16"2 11/16"Not Rated1650A42200000
    9 7/8"1"4 5/16"Not Rated1650A42600000
    11 13/16"13/16"3 9/16"Not Rated1650A42300000
    11 13/16"1"4 5/16"Not Rated1650A42700000
    11 13/16"1 3/16"5 1/8"Not Rated1650A43100000
    13 13/16"1 3/16"5 1/8"Not Rated1650A43200000
    15 3/4"13/16"3 9/16"Not Rated1650A42400000
    15 3/4"1"4 5/16"Not Rated1650A42800000
    15 3/4"1 3/16"5 1/8"Not Rated1650A43300000
    19 11/16"1"4 5/16"Not Rated1650A42900000
    19 11/16"1 3/16"5 1/8"Not Rated1650A43400000
    23 5/8"1 3/16"5 1/8"Not Rated1650A43500000
     
    Style 2—Round Grip
    Image of Product. Style 2. Front orientation. Pull Handles and Knobs. Weld-On-Mount Pull Handles, Style 2—Round Grip.

    Style 2

     
    304 Stainless Steel—Dull
    13"1/2"2 1/16"Not Rated11/16"1 3/4"1871A400000
     
    304 Stainless Steel—Polished
    9 1/2"5/8"2 5/8"Not Rated1"2 1/4"1650A11400000
     
    Aluminum—Dull
    12 13/16"1/2"2 1/8"Not Rated3/4"1 7/8"1871A250000
     
    1010-1018 Low-Carbon Steel—Dull
    13"1/2"2 1/16"Not Rated11/16"1 3/4"1871A690000
     
    1010-1018 Low-Carbon Steel—Polished
    9 1/2"5/8"2 5/8"Not Rated1"2 1/4"1650A11500000
    11 1/2"5/8"2 5/8"Not Rated1"2 1/4"1650A11100000
    13 1/2"5/8"2 5/8"Not Rated1"2 1/4"1650A11200000
    15 1/2"5/8"2 5/8"Not Rated1"2 1/4"1650A11300000
     
    Style 3—Oval Grip
    Image of Product. Style 3. Front orientation. Pull Handles and Knobs. Weld-On-Mount Pull Handles, Style 3—Oval Grip.

    Style 3

     
    304 Stainless Steel—Dull
    5 3/4"5/8"7/16"1 1/4"Not Rated1 9/16"7/8"5187A10000
    6 5/16"13/16"1/2"1 1/2"Not Rated1 5/8"15/16"5187A200000
     
    1010-1018 Low-Carbon Steel—Dull
    5 3/4"5/8"7/16"1 1/4"Not Rated1 1/2"7/8"1650A10000
     
    1020 Low-Carbon Steel—Dull
    6 5/16"13/16"1/2"1 1/2"Not Rated1 5/8"15/16"1650A20000
     

    Weld-On-Mount Folding Pull Handles with Mounting Plate

    Image of Product. Style 1. Front orientation. Pull Handles and Knobs. Weld-On-Mount Folding Pull Handles with Mounting Plate, Style 1—Round Grip.
    Image of Product. Style 2. Front orientation. Pull Handles and Knobs. Weld-On-Mount Folding Pull Handles with Mounting Plate, Style 2—Round Grip.

    Style 1

    Style 2

    These handles provide a stronger connection than those attached with screws or nuts. Their round grip allows your hand to pivot in any direction and folds out of the way when it's not in use. Use them to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment.
    304 Stainless Steel—Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
    Mounting
    Plate
    Each
    Folding
    Angle
    Grip
    Dia.
    Handle
    Wd.
    Projection
    Pull Cap.,
    lbf
    Ht.
    Wd.
    Thk.
    1-49
    50-99
    100-Up
    Style 1—Round Grip
     
    304 Stainless Steel—Dull
    90°5/16"3 1/2"2 1/4"3251 3/4"3 3/8"1/16"1856A610000000000000000
     
    1008 Low-Carbon Steel—Dull
    90°5/16"3 7/8"3"3252 7/8"3 3/8"1/16"15265A83000000000000
    90°5/16"4"2 1/2"3251 3/4"3 3/8"1/16"15265A84000000000000
    90°5/16"4"2 1/2"3252 7/8"3 3/8"1/32"15265A86000000000000
    90°3/8"5 1/8"3 1/4"3502 5/8"4"1/16"15265A850000000000000
     
    Style 2—Round Grip
     
    304 Stainless Steel—Dull
    120°1/4"2 15/16"1 13/16"Not Rated1 3/8"3 1/2"1/16"1856A57000000000000
     

    Weld-On-Mount Recessed Pull Handles

    Image of Product. Front orientation. Pull Handles and Knobs. Weld-On-Mount Recessed Pull Handles.
    This handle provides a stronger connection than those attached with screws or nuts. It fits into a cutout, so it's flush with the mounting surface. Use this handle to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. Made of stainless steel, it has excellent corrosion resistance and good chemical resistance.
    For Panel
    Cutout, mm
    Ht.,
    mm
    Wd.,
    mm
    Back Projection,
    mm
    Ht.
    Wd.
    Pull
    Cap.
    Each
     
    304 Stainless Steel—Dull
    12262169040Not Rated1655A700000
     

    Spring Handles

    Image of Product. Front orientation. Spring Handles. Style 1.

    Style 1

    Image of Product. Front orientation. Spring Handles. Style 2.

    Style 2

    Also known as stove handles, these steel spring handles dissipate heat. Slide or weld them onto a shaft or rod to install.
    Nickel Plated and Zinc Yellow-Chromate Plated—Nickel-plated and zinc yellow-chromate plated handles are mildly rust resistant.
    Style
    For Rod
    Dia.
    Lg.
    Max.
    Dia.
    Mount Type
    Each
    Steel
    13/8"2 1/2"1"Slide On, Weld On4222N1100000
    13/8"2 1/2"1 1/4"Slide On, Weld On4222N120000
    11/2"3 3/8"1 1/2"Slide On, Weld On4222N130000
    11/2"3 1/2"1 3/4"Slide On, Weld On4222N140000
    11/2"4 1/4"1 1/2"Slide On, Weld On4222N160000
    21/2"4 1/4"1 1/4"Slide On, Weld On4222N150000
    21/2"4 1/2"1 1/2"Slide On, Weld On4222N170000
    21/2"5 3/4"1 1/2"Slide On, Weld On4222N1800000
     
    Nickel-Plated Steel
    13/8"2 1/2"1 1/8"Slide On, Weld On2449N120000
    13/8"2 1/2"1 1/4"Slide On, Weld On2449N140000
    11/2"3 3/8"1 1/2"Slide On, Weld On2449N160000
    11/2"3 1/2"1 3/4"Slide On, Weld On2449N110000
    11/2"4 1/4"1 1/4"Slide On, Weld On2449N150000
    11/2"4 1/4"1 1/2"Slide On, Weld On2449N170000
    21/2"4 1/2"1 1/2"Slide On, Weld On2449N180000
    21/2"5 3/4"1 1/2"Slide On, Weld On2449N130000
     
    Zinc-Yellow-Chromate-Plated Steel
    13/8"2 1/2"1"Slide On, Weld On4223N110000
    11/2"3 1/2"1 3/4"Slide On, Weld On4223N140000
    11/2"4 1/4"1 1/2"Slide On, Weld On4223N160000
    21/2"4 1/2"1 1/2"Slide On, Weld On4223N170000
    21/2"5 3/4"1 1/2"Slide On, Weld On4223N1800000
     

    Step Handles

    Image of Product. Front orientation. Contains Annotated. Steps. Step Handles, Weld On.

    Weld On

    Add a hand- or foothold for easier access to your vehicle or equipment. These handles have a textured surface that’s easy to grip and keeps you from slipping.
    Note: Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Weld On—Weld-on step handles can be installed with the side guards facing up or down. Mount them up to keep your toe from slipping; mount them down to maximize the surface area on top of the handle. For a clean weld, choose a handle that’s the same material as your mounting surface.
    Overall
    Step
    Material
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Tread
    Projection
    Wt.,
    lb.
    Assembly
    Each
    Weld On
    Steel1 3/4"7 3/4"4 1/8"6 3/4"1 5/8"Diamond Tread4 1/8"3.2Assembled9823N12000000
    Aluminum1 5/8"7 3/4"4 1/8"7"1 5/8"Diamond Tread4 1/8"1.12Assembled9823N1100000
     

    Curved Weld-On-Mount Folding Pull Handles with Mounting Plate

    Image of ProductInUse. Front orientation. Pull Handles and Knobs. Curved Weld-On-Mount Folding Pull Handles with Mounting Plate.
    Image of Product. Front orientation. Pull Handles and Knobs. Curved Weld-On-Mount Folding Pull Handles with Mounting Plate.
    Add or replace handles on drums and barrels. All of these handles have a curved mounting plate that sits flush against the surface and a folding grip that drops out of the way when you let go. They provide a stronger connection than those attached with screws or nuts. All have round grips that allow your hand to pivot in any direction.
    Mounting
    Plate
    Temp.,
    ° F
    Each
    Folding
    Angle
    For Drum
    Dia.
    Grip
    Dia.
    Handle
    Wd.
    Projection
    Pull
    Cap.
    Ht.
    Wd.
    Thk.
    Mounting Fasteners
    Included
    Min.
    Max.
    1-9
    10-Up
    Round Grip
     
    Steel with Nylon Grip—Dull
    90°23 1/2"13/16"5 1/2"5/8"Not Rated2 1/8"4"1/16"No203902446N19000000000000
    90°23 1/2"13/16"5 1/2"11/16"Not Rated2 1/8"4"1/16"No203902446N160000000000
    90°23 1/2"13/16"5 1/2"3/4"Not Rated2 1/8"4"1/16"No203902446N130000000000
     

    T-Handle Weld-On Retractable Spring Plungers

    Image of Product. Front orientation. Contains Annotated. Spring Plungers. T-Handle Weld-On Retractable Spring Plungers.
    With the widest grip, T-handles give you the most leverage of all our handles and are the easiest to grab with gloved or slippery hands. A tug manually retracts the nose for controlled adjustments. Since they weld in place, these spring plungers have the strongest hold for aligning, securing, and positioning components on heavy machinery. They can do everything from locking attachments on forklifts to holding dies in place on industrial presses. To change your setup, unthread the spring plunger from the old welded-on barrel and thread it into a new one.
    Zinc-Plated Steel Nose—The strongest, most wear-resistant noses, these won't deform from stress and vibration. They withstand occasional exposure to moisture.
    18-8 Stainless Steel Nose—The choice for wet and outdoor environments, 18-8 stainless steel resists rusting. It's strong enough for most jobs, but won't withstand stress and vibration as well as steel.
    Twist-to-Lock—Free up both hands to adjust your workpiece or switch out parts without the plunger springing back and getting in the way. Pull back the handle and twist to lock the nose in its retracted position.
    Spring Plungers
    Replacement
    Barrel Sleeves
    Nose
    Body
    Handle
    Nonlocking
    Twist-to-Lock
    Extended
    Lg.
    Dia.
    Material
    Wd.
    Lg.
    Material
    Lg.
    Each
    Each
    Each
    Zinc-Plated Steel Nose
    0.563"0.25"Steel1"1.5"Plastic2 1/4"90222A79700000090222A31200000090222A80400000
    0.563"0.375"Steel1"1.5"Plastic2 1/4"90222A7980000090222A5030000090222A8040000
    0.563"0.5"Steel1"1.5"Plastic2 1/4"90222A7990000090222A5180000090222A8040000
    0.563"0.5"Steel1"2.25"Plastic2 1/4"90222A8010000090222A5480000090222A8050000
    0.563"0.5"Steel1"4.5"Plastic2 1/4"90222A80300000———090222A80600000
    0.563"0.625"Steel1"2.25"Plastic2 1/4"90222A8020000090222A6660000090222A8050000
    0.625"0.375"Steel1"1.5"Plastic2 1/4"90222A11200000———090222A8040000
    0.625"0.5"Steel1"1.5"Plastic2 1/4"90222A11600000———090222A8040000
    0.625"0.5"Steel1"3"Plastic2 1/4"90222A11800000———0———0
    0.685"0.5"Steel1"1.5"Plastic2 1/4"———090222A5250000090222A8040000
    0.688"0.5"Steel1"1.5"Plastic2 1/4"90222A80000000———090222A8040000
     
    18-8 Stainless Steel Nose
    0.563"0.375"18-8 Stainless Steel
    1"1.5"Plastic2 1/4"91712A1010000091712A3350000091712A58200000
    0.563"0.5"18-8 Stainless Steel
    1"1.5"Plastic2 1/4"91712A1190000091712A3510000091712A58200000
    0.563"0.5"18-8 Stainless Steel
    1"2.25"Plastic2 1/4"91712A1550000091712A3830000091712A58300000
    0.563"0.625"18-8 Stainless Steel
    1"2.25"Plastic2 1/4"91712A5810000091712A4140000091712A58300000
     

    Ball-Grip Weld-On Retractable Spring Plungers

    Image of Product. Front orientation. Contains Annotated. Spring Plungers. Ball-Grip Weld-On Retractable Spring Plungers.
    The smooth ball handle is easy to grip and won't catch on other parts. Pull it back to manually retract the nose and make adjustments whenever you need. Since they weld in place, these spring plungers have the strongest hold for aligning, securing, and positioning components on heavy machinery. They can do everything from locking attachments on forklifts and holding dies in place on industrial presses. To change your setup, unthread the spring plunger from the old welded-on barrel and thread it into a new one.
    Zinc-Plated Steel Nose—The strongest, most wear-resistant noses, these won't deform from stress and vibration. They withstand occasional exposure to moisture.
    18-8 Stainless Steel Nose—The choice for wet and outdoor environments, 18-8 stainless steel resists rusting. It's strong enough for most jobs, but won't withstand stress and vibration as well as steel.
    Twist-to-Lock—Free up both hands to adjust your workpiece or switch out parts without the plunger springing back and getting in the way. Pull back the handle and twist to lock the nose in its retracted position.
    Spring Plungers
    Replacement
    Barrel Sleeves
    Nose
    Body
    Handle
    Nonlocking
    Twist-to-Lock
    Extended
    Lg.
    Dia.
    Material
    Wd.
    Lg.
    Material
    Lg.
    Each
    Each
    Each
    Zinc-Plated Steel Nose
    0.563"0.25"Steel1"1.5"Plastic1 3/8"90222A80900000090222A22200000090222A80400000
    0.563"0.375"Steel1"1.5"Plastic1 3/8"90222A8100000090222A6250000090222A8040000
    0.563"0.5"Steel1"1.5"Plastic1 3/8"90222A8110000090222A6430000090222A8040000
    0.563"0.5"Steel1"2.25"Plastic1 3/8"90222A8130000090222A6790000090222A8050000
    0.563"0.5"Steel1"4.5"Plastic1 3/8"90222A81500000———090222A80600000
    0.563"0.625"Steel1"2.25"Plastic1 3/8"90222A8140000090222A4470000090222A8050000
    0.625"0.375"Steel1"1.5"Plastic1 3/8"90222A41500000———090222A8040000
    0.625"0.375"Steel1"3"Plastic1 3/8"90222A42300000———0———0
    0.625"0.5"Steel1"1.5"Plastic1 3/8"90222A41900000———090222A8040000
    0.688"0.5"Steel1"1.5"Plastic1 3/8"90222A8120000090222A3430000090222A8040000
     
    18-8 Stainless Steel Nose
    0.563"0.375"18-8 Stainless Steel
    1"1.5"Plastic1 3/8"91712A2220000091712A4430000091712A58200000
    0.563"0.5"18-8 Stainless Steel
    1"1.5"Plastic1 3/8"91712A2400000091712A4610000091712A58200000
    0.563"0.5"18-8 Stainless Steel
    1"2.25"Plastic1 3/8"91712A2760000091712A4970000091712A58300000
    0.563"0.625"18-8 Stainless Steel
    1"2.25"Plastic1 3/8"91712A5840000091712A3210000091712A58300000
     

    L-Handle Weld-On Retractable Spring Plungers

    Image of Product. Front orientation. Contains Annotated. Spring Plungers. L-Handle Weld-On Retractable Spring Plungers.
    The L-handle takes up less space than a T-handle and swivels to avoid obstacles. Give it a tug to manually retract the nose and make controlled adjustments. Since they weld in place, these spring plungers have the strongest hold for aligning, securing, and positioning components on heavy machinery. They can do everything from locking attachments on forklifts to holding dies in place on industrial presses.
    Steel Nose—The strongest, most wear-resistant noses, these won't deform from stress and vibration. Steel is best for dry environments, however, since moisture will cause it to rust.
    18-8 Stainless Steel Nose—The choice for wet and outdoor environments, 18-8 stainless steel resists rusting. It's strong enough for most jobs, but won't withstand stress and vibration as well as steel.
    Spring Plungers
    Weld-On Catches
    Nose
    Nose
    Force, lbf
    Body
    Handle
    Nonlocking
    Extended
    Lg.
    Dia.
    Extended
    Compressed
    Material
    Wd.
    Lg.
    Material
    Lg.
    Each
    Each
    Steel Nose
    0.38"0.16"0.52.5Steel0.25"0.88"Steel3/4"8473A110000008473A21000000
    0.56"0.24"0.83.8Steel0.375"1.47"Steel1"8473A12000008473A220000
    0.75"0.32"15Steel0.5"1.42"Steel1 3/8"8473A13000008473A2300000
    1"0.38"15Steel0.625"2.11"Steel1 3/8"8473A14000008473A2400000
     
    18-8 Stainless Steel Nose
    0.38"0.16"0.52.518-8 Stainless Steel
    0.25"0.88"18-8 Stainless Steel
    3/4"8473A31000008473A4100000
    0.56"0.24"3.83.818-8 Stainless Steel
    0.375"1.47"18-8 Stainless Steel
    1"8473A32000008473A4200000
    0.75"0.32"1518-8 Stainless Steel
    0.5"1.42"18-8 Stainless Steel
    1 3/8"8473A33000008473A4300000
    1"0.38"1518-8 Stainless Steel
    0.625"2.11"18-8 Stainless Steel
    1 3/8"8473A34000008473A4400000
     
    back to top