McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    27 Products

    Ladder-Style Steps

    Image of Product. Front orientation. Contains Annotated. Steps. Ladder-Style Steps, Serrated Step.

    Serrated Step

    Image of Product. Front orientation. Contains Annotated. Steps. Ladder-Style Steps, Perforated Step.

    Perforated Step

    Good for use as ladder rungs, cut these steps to size with a metal-cutting saw and weld them in place. For a clean weld, match the step material to the surface you are welding to. These steps must be welded at each end with welds capable of supporting the rated capacity. For those 5 ft. and longer, the maximum cut length is 24". Shorter lengths support higher capacities.
    Note: Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Galvanized Steel—Galvanized steel steps require preparation before welding—grind off the coating from the part of the step you intend to weld. After welding, apply a cold galvanizing spray to the welds to protect against rust.
    Serrated Step—Serrated steps give you maximum slip resistance and allow liquids and debris to pass through. Perforated steps are less slip-resistant than serrated steps but offer a more comfortable hand grip.
    Overall
    Ht.
    Wd.
    Dp.
    Weight Capacity
    Each
    Steel
     
    Serrated Step
    1 1/4"17"1 1/8"540 lb.6926T1000000
    1 1/4"17"1 7/8"540 lb.6926T200000
    1 1/4"7 ft.1 1/8"250 lb. for 18" to 24" Cut Lengths, 540 lb. Up to 18" Cut Lengths6926T14000000
    1 1/4"7 ft.1 7/8"250 lb. for 18" to 24" Cut Lengths, 540 lb. Up to 18" Cut Lengths6926T9000000
    1 1/4"20 ft.1 1/8"250 lb. for 18" to 24" Cut Lengths, 540 lb. Up to 18" Cut Lengths6926T3000000
    1 1/4"20 ft.1 7/8"250 lb. for 18" to 24" Cut Lengths, 540 lb. Up to 18" Cut Lengths6926T4000000
     
    Perforated Step
    1 1/8"5 ft.1 5/8"250 lb. for 18" to 24" Cut Lengths, 330 lb. Up to 18" Cut Lengths6926T11500000
    1 1/2"5 ft.1 1/4"330 lb. for 18" to 24" Cut Lengths, 450 lb. Up to 18" Cut Lengths6926T11100000
    1 1/2"5 ft.2 1/4"570 lb. for 18" to 24" Cut Lengths, 760 lb. Up to 18" Cut Lengths6926T11800000
     
    Galvanized Steel
     
    Perforated Step
    1 1/8"5 ft.1 5/8"250 lb. for 18" to 24" Cut Lengths, 330 lb. Up to 18" Cut Lengths6926T11700000
    1 1/2"5 ft.1 1/4"330 lb. for 18" to 24" Cut Lengths, 450 lb. Up to 18" Cut Lengths6926T11300000
    1 1/2"5 ft.2 1/4"570 lb. for 18" to 24" Cut Lengths, 760 lb. Up to 18" Cut Lengths6926T12100000
     
    Aluminum
     
    Serrated Step
    1 1/2"17"2"540 lb.6926T1100000
    1 1/2"7 ft.2"250 lb. for 18" to 24" Cut Lengths, 540 lb. Up to 18" Cut Lengths6926T12000000
     
    Perforated Step
    1 1/8"5 ft.1 5/8"220 lb. for 18" to 24" Cut Lengths, 290 lb. Up to 18" Cut Lengths6926T11600000
    1 1/2"5 ft.1 1/4"310 lb. for 18" to 24" Cut Lengths, 410 lb. Up to 18" Cut Lengths6926T11200000
    1 1/2"5 ft.2 1/4"540 lb. for 18" to 24" Cut Lengths, 720 lb. Up to 18" Cut Lengths6926T11900000
     
    304 Stainless Steel
     
    Serrated Step
    1 1/4"17"1 1/8"540 lb.6926T1500000
    1 1/4"7 ft.1 1/8"250 lb. for 18" to 24" Cut Lengths, 540 lb. Up to 18" Cut Lengths6926T7000000
     
    Perforated Step
    1 1/2"5 ft.1 1/4"230 lb. for 18" to 24" Cut Lengths, 300 lb. Up to 18" Cut Lengths6926T11400000
    1 1/2"5 ft.2 1/4"380 lb. for 18" to 24" Cut Lengths, 510 lb. Up to 18" Cut Lengths6926T122000000
     

    Step Handles

    Image of Product. Front orientation. Contains Annotated. Steps. Step Handles, Weld On.

    Weld On

    Add a hand- or foothold for easier access to your vehicle or equipment. These handles have a textured surface that’s easy to grip and keeps you from slipping.
    Note: Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Weld On—Weld-on step handles can be installed with the side guards facing up or down. Mount them up to keep your toe from slipping; mount them down to maximize the surface area on top of the handle. For a clean weld, choose a handle that’s the same material as your mounting surface.
    Overall
    Step
    Material
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Tread
    Projection
    Wt.,
    lb.
    Assembly
    Each
    Weld On
    Steel1 3/4"7 3/4"4 1/8"6 3/4"1 5/8"Diamond Tread4 1/8"3.2Assembled9823N12000000
    Aluminum1 5/8"7 3/4"4 1/8"7"1 5/8"Diamond Tread4 1/8"1.12Assembled9823N1100000
     

    Under-Mount Steps

    Image of Product. Front orientation. Contains Annotated. Steps. Under-Mount Steps.
    Get a leg up. Weld or bolt these steps—originally designed to hang underneath trucks—to any flat horizontal surface. They’re wide and deep enough to support both feet at once to give you a stable base. They’re also serrated, so you won’t slip. And unlike fold-away options, they’re always ready to step on. Made of galvanized steel, you can use them outdoors and in harsh conditions. Rubber sides absorb impact without breaking.
    Note: Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Overall
    Step
    Mounting
    Holes
    Ht.
    Wd.
    Dp.
    No. of
    Steps
    Wd.
    Dp.
    Tread
    Material
    Wt. Cap.
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Assembly
    Each
    Black Rubber
    11"13 1/2"4 3/4"112"4 3/4"SerratedGalvanized SteelNot RatedYes23/8"Unassembled9868N1110000000
    11"31 1/2"4 3/4"130"4 3/4"SerratedGalvanized SteelNot RatedYes23/8"Unassembled9868N112000000
     

    Under-Mount Foldaway Steps

    Image of Product. Front orientation. Contains Annotated. Steps. Under-Mount Foldaway Steps.
    A leg up when you need it, out of the way when you don’t—these ladders slide in and out of their mounting bracket for easy access. Originally designed for trucks, weld or bolt them underneath any surface. Made of powder-coated steel, they resist rust and stand up to the elements. The perforated steps are slip resistant and easier on your shoes than serrated steps.
    Note: Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Mounting
    Holes
    Max. Climbing
    Ht.
    Lg.
    Wd.
    Ladder
    Wd.
    No. of
    Steps
    Step
    Tread
    Wt. Cap.
    Mounting Hardware
    Included
    No.
    of
    Lg.
    Wd.
    Assembly
    Each
    Black Powder-Coated Steel
    11"25 1/2"19 3/4"14 1/4"2PerforatedNot RatedNo281 3/16"3/8"Assembled9818N1110000000
    19"30 1/4"19 3/4"14 1/4"3PerforatedNot RatedNo321 3/16"3/8"Assembled9818N112000000
     
    back to top