Weld Studs | McMaster-Carr

	System of Measurement System of Measurement

Inch

Metric

	Thread Size Thread Size

4-40
6-32
8-32
10-24
10-32
1/4"-20
5/16"-18
3/8"-16
1/2"-13
M3.5
M4

	Length Length

	Diameter Diameter

	Material Material

Steel

Stainless Steel

	Projection Location Projection Location

Below Head

Above Head

	Component Component

Threaded Stud

Welder

Collet

	Base Diameter Base Diameter

	Head Diameter Head Diameter

	Base Thickness Base Thickness

	Thread Spacing Thread Spacing

Coarse

Fine

	Thread Fit Thread Fit

Class 2A

Class 3A

Class 6g

	For Collet Thread Size For Collet Thread Size

	Thread Type Thread Type

UNC

UNF

	Tensile Strength Tensile Strength

60,000 psi

65,000 psi

Not Rated

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

DFARS Specialty Metals
Compliant

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Specifications Met Specifications Met

ASTM

AWS

	Head Height Head Height

	Base Width Base Width

	Base Length Base Length

	For Collet Gauge Number For Collet Gauge Number

Forward

How can we improve?

195 Products

About Threaded Studs and Rods

Projections Below the Head

Projections Above the Head

These studs have a wide base that distributes the load and projections that concentrate the weld. Length listed is overall length.

Choose studs with below-head projection for a stronger hold that uses the full strength of the fastener. Pass these studs through a hole and weld them in place.

Choose studs with above-head projection to weld the screw directly to the surface of the material for a smoother appearance.

For technical drawings and 3-D models, click on a part number.

	Base
Lg.	Dia.	Thick.	Tensile Strength, psi	Projection Location	Hardness	Pkg. Qty.		Pkg.
Steel
6-32
1/2"	0.323"	0.052"	60,000	Below Head	Not Rated	100	000000000	000000
5/8"	0.323"	0.052"	60,000	Below Head	Not Rated	100	000000000	0000
3/4"	0.323"	0.052"	60,000	Below Head	Not Rated	100	000000000	0000
8-32
3/8"	0.323"	0.052"	60,000	Above Head	Not Rated	100	000000000	00000
3/8"	0.385"	0.068"	60,000	Below Head	Not Rated	100	000000000	0000
1/2"	0.385"	0.068"	60,000	Below Head	Not Rated	100	000000000	0000
3/4"	0.385"	0.068"	60,000	Below Head	Not Rated	100	000000000	00000
1"	0.385"	0.068"	60,000	Below Head	Not Rated	100	000000000	00000
10-24
3/8"	0.385"	0.068"	60,000	Above Head	Not Rated	100	000000000	00000
3/8"	0.448"	0.068"	60,000	Below Head	Not Rated	100	000000000	0000
1/2"	0.385"	0.068"	60,000	Above Head	Not Rated	100	000000000	00000
1/2"	0.448"	0.068"	60,000	Below Head	Not Rated	100	000000000	00000
5/8"	0.448"	0.068"	60,000	Below Head	Not Rated	100	000000000	00000
3/4"	0.385"	0.068"	60,000	Above Head	Not Rated	100	000000000	00000
3/4"	0.448"	0.068"	60,000	Below Head	Not Rated	100	000000000	00000
1"	0.448"	0.068"	60,000	Below Head	Not Rated	100	000000000	00000
1 1/4"	0.448"	0.068"	60,000	Below Head	Not Rated	100	000000000	00000
10-32
3/8"	0.448"	0.068"	60,000	Below Head	Not Rated	100	000000000	00000
1/2"	0.385"	0.068"	60,000	Above Head	Not Rated	100	000000000	00000
1/2"	0.448"	0.068"	60,000	Below Head	Not Rated	100	000000000	00000
5/8"	0.385"	0.068"	60,000	Above Head	Not Rated	100	000000000	00000
5/8"	0.448"	0.068"	60,000	Below Head	Not Rated	100	000000000	00000
3/4"	0.385"	0.068"	60,000	Above Head	Not Rated	100	000000000	00000
3/4"	0.448"	0.068"	60,000	Below Head	Not Rated	100	000000000	00000
1"	0.385"	0.068"	60,000	Above Head	Not Rated	100	000000000	00000
1"	0.448"	0.068"	Not Rated	Below Head	Not Rated	50	000000000	0000
1/4"-20
3/8"	0.51"	0.083"	60,000	Above Head	Not Rated	50	000000000	00000
3/8"	0.575"	0.083"	Not Rated	Below Head	Not Rated	50	000000000	0000
1/2"	0.51"	0.083"	60,000	Above Head	Not Rated	50	000000000	00000
1/2"	0.575"	0.083"	Not Rated	Below Head	Not Rated	50	000000000	00000
5/8"	0.51"	0.083"	60,000	Above Head	Not Rated	50	000000000	00000
5/8"	0.575"	0.083"	Not Rated	Below Head	Not Rated	50	000000000	00000
3/4"	0.51"	0.083"	60,000	Above Head	Not Rated	50	000000000	00000
3/4"	0.575"	0.083"	Not Rated	Below Head	Not Rated	50	000000000	00000
7/8"	0.575"	0.083"	60,000	Below Head	Not Rated	25	000000000	00000
1"	0.51"	0.083"	60,000	Above Head	Not Rated	50	000000000	00000
1"	0.575"	0.083"	Not Rated	Below Head	Not Rated	50	000000000	00000
1 1/4"	0.575"	0.083"	60,000	Below Head	Not Rated	25	000000000	00000
1 1/2"	0.575"	0.083"	60,000	Below Head	Not Rated	25	000000000	0000
1 3/4"	0.575"	0.083"	60,000	Below Head	Not Rated	25	000000000	0000
2"	0.575"	0.083"	60,000	Below Head	Not Rated	25	000000000	00000
5/16"-18
3/4"	0.63"	0.099"	60,000	Above Head	Not Rated	5	000000000	0000
3/4"	0.755"	0.099"	60,000	Below Head	Not Rated	25	000000000	00000
1"	0.755"	0.099"	60,000	Below Head	Not Rated	5	000000000	0000
1 1/4"	0.755"	0.099"	60,000	Below Head	Not Rated	25	000000000	00000
2"	0.755"	0.099"	60,000	Below Head	Not Rated	5	000000000	00000
3/8"-16
1"	0.88"	0.114"	60,000	Below Head	Not Rated	10	000000000	00000
1 1/4"	0.88"	0.114"	60,000	Below Head	Not Rated	5	000000000	0000
1 1/2"	0.88"	0.114"	60,000	Below Head	Not Rated	10	000000000	00000
1 3/4"	0.88"	0.114"	60,000	Below Head	Not Rated	10	000000000	00000
1/2"-13
1 1/4"	1.005"	0.146"	60,000	Below Head	Not Rated	5	000000000	00000
M3.5
8mm	7mm	1.1mm	Not Rated	Above Head	Not Rated	10	000000000	0000
25mm	7mm	1.1mm	Not Rated	Above Head	Not Rated	10	000000000	0000
M4
6mm	8mm	1.2mm	Not Rated	Above Head	Not Rated	10	000000000	0000
8mm	8mm	1.2mm	Not Rated	Above Head	Not Rated	10	000000000	0000
10mm	8mm	1.2mm	Not Rated	Above Head	Not Rated	10	000000000	0000

Stainless Steel Right-Angle Weld Studs

These studs have good chemical resistance and may be mildly magnetic. Weld them to flat stainless steel surfaces in confined areas, narrow channels, and tight corners.

For technical drawings and 3-D models, click on a part number.

	Base
Lg.	Lg.	Wd.	Thick.	Tensile Strength	Hardness	Pkg. Qty.		Pkg.
18-8 Stainless Steel
6-32
3/8"	9/16"	7/32"	3/64"	Not Rated	Not Rated	25	000000000	000000
1/2"	9/16"	7/32"	3/64"	Not Rated	Not Rated	25	000000000	00000
8-32
3/8"	5/8"	1/4"	1/16"	Not Rated	Not Rated	25	000000000	00000
1/2"	5/8"	1/4"	1/16"	Not Rated	Not Rated	25	000000000	00000
5/8"	5/8"	1/4"	1/16"	Not Rated	Not Rated	10	000000000	0000
3/4"	5/8"	1/4"	1/16"	Not Rated	Not Rated	10	000000000	0000
1"	5/8"	1/4"	1/16"	Not Rated	Not Rated	10	000000000	0000
1 1/4"	5/8"	1/4"	1/16"	Not Rated	Not Rated	10	000000000	0000
1 1/2"	5/8"	1/4"	1/16"	Not Rated	Not Rated	10	000000000	0000
10-24
3/8"	11/16"	5/16"	1/16"	Not Rated	Not Rated	10	000000000	0000
1/2"	11/16"	5/16"	1/16"	Not Rated	Not Rated	10	000000000	0000
3/4"	11/16"	5/16"	1/16"	Not Rated	Not Rated	10	000000000	0000
1"	11/16"	5/16"	1/16"	Not Rated	Not Rated	10	000000000	0000
1 1/4"	11/16"	5/16"	1/16"	Not Rated	Not Rated	10	000000000	0000
10-32
3/8"	11/16"	11/32"	1/16"	Not Rated	Not Rated	10	000000000	0000
1/2"	11/16"	11/32"	1/16"	Not Rated	Not Rated	10	000000000	0000
3/4"	11/16"	11/32"	1/16"	Not Rated	Not Rated	10	000000000	0000
1"	11/16"	11/32"	1/16"	Not Rated	Not Rated	10	000000000	0000
1 1/4"	11/16"	11/32"	1/16"	Not Rated	Not Rated	10	000000000	00000
1 3/4"	11/16"	11/32"	1/16"	Not Rated	Not Rated	10	000000000	00000
1/4"-20
1/2"	3/4"	3/8"	3/32"	Not Rated	Not Rated	10	000000000	00000
5/8"	3/4"	3/8"	3/32"	Not Rated	Not Rated	10	000000000	00000
3/4"	3/4"	3/8"	3/32"	Not Rated	Not Rated	10	000000000	00000
7/8"	3/4"	3/8"	3/32"	Not Rated	Not Rated	10	000000000	00000
1"	3/4"	3/8"	3/32"	Not Rated	Not Rated	5	000000000	0000
1 1/4"	3/4"	3/8"	3/32"	Not Rated	Not Rated	5	000000000	0000
1 1/2"	3/4"	3/8"	3/32"	Not Rated	Not Rated	5	000000000	0000
1 3/4"	3/4"	3/8"	3/32"	Not Rated	Not Rated	5	000000000	0000
5/16"-18
5/8"	7/8"	7/16"	1/8"	Not Rated	Not Rated	5	000000000	0000
3/4"	7/8"	7/16"	1/8"	Not Rated	Not Rated	5	000000000	0000
1"	7/8"	7/16"	1/8"	Not Rated	Not Rated	5	000000000	0000
1 1/4"	7/8"	7/16"	1/8"	Not Rated	Not Rated	5	000000000	0000
1 1/2"	7/8"	7/16"	1/8"	Not Rated	Not Rated	5	000000000	00000
2"	7/8"	7/16"	1/8"	Not Rated	Not Rated	5	000000000	00000
3/8"-16
1"	1"	17/32"	5/32"	Not Rated	Not Rated	5	000000000	00000
1 1/4"	1"	17/32"	5/32"	Not Rated	Not Rated	5	000000000	00000
1 1/2"	1"	17/32"	5/32"	Not Rated	Not Rated	5	000000000	00000

Steel Right-Angle Weld Studs

Weld these studs to flat uncoated steel surfaces in confined areas, narrow channels, and tight corners.

For technical drawings and 3-D models, click on a part number.

	Base
Lg.	Lg.	Wd.	Thick.	Tensile Strength	Hardness	Pkg. Qty.		Pkg.
Steel
6-32
1/2"	9/16"	7/32"	3/64"	Not Rated	Not Rated	50	000000000	000000
8-32
1/2"	5/8"	1/4"	1/16"	Not Rated	Not Rated	50	000000000	00000
10-24
1/2"	11/16"	5/16"	1/16"	Not Rated	Not Rated	50	000000000	00000
10-32
1/2"	11/16"	11/32"	1/16"	Not Rated	Not Rated	50	000000000	00000
1/4"-20
1/2"	3/4"	3/8"	3/32"	Not Rated	Not Rated	25	000000000	0000
5/8"	3/4"	3/8"	3/32"	Not Rated	Not Rated	25	000000000	0000
3/4"	3/4"	3/8"	3/32"	Not Rated	Not Rated	25	000000000	0000
1"	3/4"	3/8"	3/32"	Not Rated	Not Rated	25	000000000	00000

Weld-On Stud Anchors for Wet Concrete

Anchor with Included Ferrule

These stud anchors strengthen the parts of buildings where steel framing connects to concrete. Weld them to the framing to help it adhere to the concrete and resist sheer forces. They have a head, so poured concrete embeds them solidly. Install them using conventional welding or specialized stud welders; a ferrule is included for use with stud welders. All anchors meet ASTM A108 material specifications and AWS D1.1 structural welding specifications. They’re also known as Nelson studs.

For technical drawings and 3-D models, click on a part number.

	Head
Length	Diameter	Height	Ferrule Material	Tensile Strength, psi	Pull-Out Strength	Shear Strength	Specifications Met	Pkg. Qty.		Pkg.
Low-Carbon Steel
1/4" Diameter
4 1/8"	1/2"	0.187"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	10	000000000	00000
3/8" Diameter
2 1/8"	3/4"	0.281"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	10	000000000	0000
3 1/8"	3/4"	0.281"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	10	000000000	0000
4 1/8"	3/4"	0.281"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	10	000000000	0000
6 1/8"	3/4"	0.281"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	10	000000000	00000
1/2" Diameter
2 1/8"	1"	0.312"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	10	000000000	00000
3 1/8"	1"	0.312"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	10	000000000	00000
4 1/8"	1"	0.312"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	10	000000000	00000
5 5/16"	1"	0.312"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	5	000000000	0000
6 1/8"	1"	0.312"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	5	000000000	0000
8 1/8"	1"	0.312"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	5	000000000	00000
5/8" Diameter
4 3/16"	1 1/4"	0.312"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	5	000000000	00000
5 3/16"	1 1/4"	0.312"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	5	000000000	00000
6 3/16"	1 1/4"	0.312"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	5	000000000	00000
6 9/16"	1 1/4"	0.312"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	5	000000000	00000
8 3/16"	1 1/4"	0.312"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	1	000000000	0000
3/4" Diameter
3 3/16"	1 1/4"	0.375"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	5	000000000	00000
3 3/8"	1 1/4"	0.375"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	5	000000000	00000
4 3/16"	1 1/4"	0.375"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	5	000000000	00000
4 3/8"	1 1/4"	0.375"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	5	000000000	00000
4 7/8"	1 1/4"	0.375"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	5	000000000	00000
5 3/16"	1 1/4"	0.375"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	5	000000000	00000
5 3/8"	1 1/4"	0.375"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	5	000000000	00000
5 7/8"	1 1/4"	0.375"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	5	000000000	00000
6 3/16"	1 1/4"	0.375"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	5	000000000	00000
8 3/16"	1 1/4"	0.375"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	1	000000000	0000
9 3/16"	1 1/4"	0.375"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	1	000000000	0000
7/8" Diameter
4 3/16"	1 3/8"	0.375"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	5	000000000	00000
5 3/16"	1 3/8"	0.375"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	1	000000000	0000
6 3/16"	1 3/8"	0.375"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	1	000000000	0000
7 3/16"	1 3/8"	0.375"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	1	000000000	0000
8 3/16"	1 3/8"	0.375"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	1	000000000	0000
9 3/16"	1 3/8"	0.375"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	1	000000000	0000
1" Diameter
4 1/4"	1 5/8"	0.5"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	1	000000000	0000
6 1/4"	1 5/8"	0.5"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	1	000000000	0000
8 1/4"	1 5/8"	0.5"	Ceramic	65,000	Not Rated	Not Rated	ASTM A108, AWS D1.1	1	000000000	0000

Through-Hole Weld-On Pins

Pass these pins through a mounting hole and spot weld the head to the surface for greater rigidity and strength than other pins.

Steel pins have good strength.

18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic. Pins are passivated for added protection against corrosion and oxidation.

For technical drawings and 3-D models, click on a part number.

		Base		1004-1045 Carbon Steel			18-8 Stainless Steel
Lg.	Dia. Tolerance	Dia.	Thick.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
5/32" Dia.
1/2"	0.0028" to 0.0068"	7/16"	1/16"	10	000000000	00000	10	000000000	00000
3/16" Dia.
3/4"	-0.0025" to 0.0025"	1/2"	5/64"	10	000000000	0000	10	000000000	0000
1"	-0.0025" to 0.0025"	1/2"	5/64"	10	000000000	0000	10	000000000	00000
1/4" Dia.
3/4"	-0.006" to 0"	5/8"	5/64"	10	000000000	0000	5	000000000	0000
1"	-0.006" to 0"	5/8"	5/64"	10	000000000	0000	5	000000000	0000
1 1/4"	-0.006" to 0"	5/8"	5/64"	10	000000000	0000	5	000000000	00000
2"	-0.006" to 0"	5/8"	5/64"	10	000000000	0000	5	000000000	00000

Surface-Mount Weld-On Pins

Spot weld these pins directly to a surface for greater rigidity and strength than other pins—no mounting hole required.

Steel pins have good strength.

18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic. Pins are passivated for added protection against corrosion and oxidation.

For technical drawings and 3-D models, click on a part number.

		Base		1004-1045 Carbon Steel			18-8 Stainless Steel
Lg.	Dia. Tolerance	Dia.	Thick.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
1/8" Dia.
1/2"	-0.011" to -0.008"	1/4"	3/64"	10	000000000	00000	__	000000	00
1/2"	-0.011" to -0.006"	1/4"	3/64"	__	000000	00	10	000000000	00000
3/16" Dia.
1/2"	-0.0025" to 0.0025"	7/16"	1/16"	10	000000000	0000	10	000000000	0000
5/8"	-0.0025" to 0.0025"	7/16"	1/16"	10	000000000	0000	10	000000000	00000
1/4" Dia.
5/16"	-0.006" to 0"	1/2"	5/64"	10	000000000	0000	10	000000000	00000
1/2"	-0.006" to 0"	1/2"	5/64"	10	000000000	0000	10	000000000	00000
3/4"	-0.006" to 0"	1/2"	5/64"	10	000000000	0000	10	000000000	00000
1"	-0.006" to 0"	1/2"	5/64"	10	000000000	0000	5	000000000	0000

Stud Welding Systems

Join threaded studs and pins to steel and stainless steel with resistance welding that won't damage the opposite side of the material.

Collets must be the same size as the stud or pin you are welding and are not interchangeable with studs from other systems.

Threaded studs are for thin-gauge base materials. 18-8 stainless steel studs are more corrosion resistant than copper-coated steel studs.

Pins are for installing insulation and acoustical lining.

Welders

	Input				Overall
Duty Cycle	Voltage	Frequency, Hz	Current, A	Output Voltage	Ht.	Wd.	Dp.	Cord Lg., ft.	Plug Type	Includes		Each
8 Studs per Minute	115V AC	60	10	120V DC	13"	12"	9"	6	Three Prong	Control Unit Welding Gun with 21-ft. Cable 4 Stop Pins for Setting Threaded Studs and Pins in Collet 15-ft. Ground Cable with 2 Ground Clamps	0000000	000000000

Collets

Thread Size	For Pin Gauge Number		Each
4-40, 6-32, 8-32, 10-24, 1/4"-20	__	0000000	000000
__	12	00000000	00000

Threaded Studs

				Copper-Plated Steel		18-8 Stainless Steel
Thread Size	For Collet Thread Size	Head Dia.	Lg.		Pkg. of 100		Pkg. of 100
1/4"-20	1/4"-20	5/16"	1/2"	0000000	00000	0000000	000000
1/4"-20	1/4"-20	5/16"	3/4"	000000	00	0000000	00000
1/4"-20	1/4"-20	5/16"	1"	0000000	00000	0000000	00000
10-24	10-24	1/4"	1/2"	0000000	0000	0000000	00000
10-24	10-24	1/4"	1"	0000000	00000	0000000	00000
4-40	4-40	3/16"	1/2"	0000000	00000	000000	00
6-32	6-32	7/32"	1/2"	0000000	0000	0000000	0000
6-32	6-32	7/32"	3/4"	0000000	00000	0000000	00000
6-32	6-32	7/32"	1 1/2"	0000000	00000	0000000	00000
8-32	8-32	1/4"	1/2"	0000000	0000	0000000	0000
8-32	8-32	1/4"	3/4"	0000000	0000	0000000	00000

Pins

For Collet Gauge Number	For Collet Thread Size	Lg.	Material		Pkg. of 100
10	6-32	2 1/2"	Copper-Plated Steel	00000000	000000
10	6-32	3"	Copper-Plated Steel	0000000	00000
10	6-32	6"	Copper-Plated Steel	0000000	00000
12	__	1"	Copper-Plated Steel	00000000	00000
12	__	2"	Copper-Plated Steel	00000000	00000
12	__	2 1/2"	Copper-Plated Steel	0000000	00000
12	__	6"	Copper-Plated Steel	00000000	00000