Spray-On Welders' Antispatter

Antispatter resists heat and keeps weld spatter from sticking to contact tips, nozzles, and welding accessories. They cannot be sold to the listed areas due to import regulations.
Container | |||||
---|---|---|---|---|---|
Net Weight, oz. | Type | Welding Process | Cannot Be Sold To | Each | |
11 | Aerosol Can | MIG, TIG, Stick, Oxyacetylene | Canada | 0000000 | 000000 |
Long-Lasting Spray-On Welders' Antispatter

This spray lasts up to eight hours so you’re not stopping to reapply. It resists heat and keeps weld spatter from sticking to contact tips, nozzles, and welding accessories.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | ||||
---|---|---|---|---|
Net Weight, oz. | Type | Welding Process | Each | |
9.5 | Aerosol Can | MIG, TIG, Stick, Oxyacetylene | 0000000 | 000000 |
Dip-In Welders' Antispatter

To apply this antispatter, also known as tip dip, dunk your MIG gun nozzle into the container. It resists heat and keeps weld spatter from sticking to contact tips, nozzles, and welding accessories.
Container | ||||
---|---|---|---|---|
Size, fl. oz. | Type | Welding Process | Each | |
16 | Can | MIG | 00000000 | 000000 |
Brush-On Welders' Antispatter

This thick liquid handles high-heat applications. It keeps weld spatter from sticking to contact tips, nozzles, and welding accessories.
Container | ||||
---|---|---|---|---|
Size, gal. | Type | Welding Process | Each | |
1 | Can | MIG, TIG, Stick, Oxyacetylene | 0000000 | 000000 |
Fiberglass Weld-Backing Tape

Stick this flexible tape to the back of welding seams to contain spatter and prevent oxygen, water vapor, and other gases from weakening the weld. Also known as back purge tape, it’s used for welding flat sheets, large tanks, and other applications where filling the space behind the seam with purge gas is difficult or expensive. Form the fiberglass spine into a small ridge over the weld joint, then press the adhesive foil down on each side. Compatible with MIG, TIG, and stick welding.
Apply 200 amp tape to thin welds on aluminum, cast iron, nickel and copper alloys, and steel.
Use 600 amp tape to shield thick welds on dense metals, such as stainless steel.
For Max. Current, A | Lg., ft. | Thick. | Material | Temp. Range, °F | Adhesive Type | Color | Welding Process | Each | |
2 1/2" Wd. | |||||||||
---|---|---|---|---|---|---|---|---|---|
200 | 82 | 0.18" | Aluminum/Fiberglass | -40° to 450° | Acrylic | Silver | MIG, TIG, Stick | 0000000 | 0000000 |
600 | 41 | 0.18" | Aluminum/Fiberglass | -40° to 450° | Acrylic | Silver | MIG, TIG, Stick | 0000000 | 00000 |
4" Wd. | |||||||||
200 | 82 | 0.18" | Aluminum/Fiberglass | -40° to 450° | Acrylic | Silver | MIG, TIG, Stick | 0000000 | 000000 |
600 | 41 | 0.18" | Aluminum/Fiberglass | -40° to 450° | Acrylic | Silver | MIG, TIG, Stick | 0000000 | 000000 |