Attach cutoff wheels, grinding wheels, and other abrasive wheels to hand-held drills and die grinders.

Reduce the arbor hole size on a wheel brush so that it fits the shaft on your tool.

Mount wheel brushes that have an arbor hole to hand-held drills and die grinders.

Reduce the arbor hole size on a flap sanding wheel so that it fits the shaft on your tool.

Attach flap wheels with an arbor hole to tools that accept a shank.

Also known as cross- and square-sanding pad shank adapters, these arbors are required to attach sanding pads for internal and irregular surfaces to hand-held drills and die grinders.

Mount cutoff wheels, grinding wheels, and other abrasive discs to the straight shaft on bench-top motors, grinders, and buffers.

Mount one of these pads onto the tool's arbor.

Holes allow dust removal when used with a vacuum sander.

Thread the stud into the tool's spindle.

Secure the shank into the collet or chuck of your tool. Attach the quick-change fastener on the sanding disc to the corresponding fastener on the backup pad.

Designed to rotate independently of the disc, these pads clear material buildup on the abrasive surface for longer disc life.

Thread one of these backup pads onto the tool’s arbor, then attach a sanding disc and secure with the disc nut.

Thread these pads onto the tool’s arbor.

Secure the shank into the collet or chuck of a tool.

Attach to grinder and buffer shafts to hold buffing wheels with shanks.

Mount to the straight shaft on your grinder or buffer.

Mount a sanding sleeve to the straight shaft of a bench or pedestal grinder using one of these drums.

No tools required—twist the drum head by hand to tighten the sanding sleeve to the drum.

Slide a sanding sleeve on the drum and tighten the nut or screw to securely hold the sleeve.