Attach cutoff wheels to a Dremel grinder.

The threaded head on these arbors holds a grinding cone.

Made of nonsparking aluminum-bronze.

The arbor’s shank attaches to hand-held drills and die grinders. Threads on the body hold the sanding roll in place.

Also known as cross- and square-sanding pad shank adapters, these arbors are required to attach sanding pads for internal and irregular surfaces to hand-held drills and die grinders.

Adapt flap wheels with a threaded stud for use on tools that have a threaded spindle.

Use flap wheels with a threaded stud in tools that accept a shank.

Mount cutoff wheels, grinding wheels, and other abrasive discs to the straight shaft on bench-top motors, grinders, and buffers.

No tools required—twist the drum head by hand to tighten the sanding sleeve to the drum.

Slide a sanding sleeve on the drum and tighten the nut or screw to securely hold the sleeve.

Mount a sanding sleeve to the straight shaft of a bench or pedestal grinder using one of these drums.

Use one of these spindles to mount buffing wheels to the tapered shaft on your grinder or buffer.

Attach to grinder and buffer shafts to hold buffing wheels with shanks.