Filter by
Pulling Rope Position
Application
For Use With
Brake Type
Body Type
Number of Speeds
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Minimum Speed
REACH
Thread Type
Inlet Thread Type
Hydraulic Winches for Wire Rope—For Horizontal Pulling
For high capacities and long life, these winches have a powerful hydraulic motor and hardened steel gears. They have an automatic brake that holds the load when the motor stops. Enclosed gears offer protection from dirt and debris.
For wire rope, see Wire Rope with Hook for Winches
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
| Max. Cap., lbs. | Fully Wound Cap., lbs. | Min. Line Speed, fpm | Max. Hydraulic Flow @ Pressure | For Max. Rope Lg., ft. | For Rope Dia. | Base Wd. | Base Lg. | O'all Wd. | O'all Lg. | O'all Ht. | Material | Rope with Hook Included | Inlet Thread Size  | Inlet Thread Type | Each | |
| 6,000 | 3,600 | 32 | 15 gpm @ 1,700 psi | 99 | 5/16" | 5 29/32" | 11 13/16" | 6 3/8" | 20 1/2" | 6 1/2" | Aluminum, Steel | No | 7/8"-14 | UNF | 0000000 | 000000000 |
| 9,000 | 5,400 | 20 | 15 gpm @ 2,200 psi | 126 | 3/8" | 8 7/16" | 13 3/4" | 8 1/2" | 23 5/8" | 8 1/2" | Aluminum, Steel | No | 7/8"-14 | UNF | 0000000 | 00000000 |
| 12,000 | 7,525 | 22 | 15 gpm @ 2,200 psi | 121 | 7/16" | 8 7/16" | 12 19/32" | 8 1/2" | 24 1/4" | 8 1/2" | Aluminum, Steel | No | 7/8"-14 | UNF | 0000000 | 00000000 |