We will reply to your message within an hour.
Choose these wire cutters for your occasional use.
Also known as diagonal-cutting pliers.
Leverage points in both the jaws and the handle give you more power with less effort.
For use where even minor magnetism can cause major damage, these wire cutters are made of titanium, so they’re completely nonmagnetic.
These cutters are stainless steel, which provides excellent corrosion resistance.
Cut steel, spring steel, and other hard wire without worrying about your wire cutters rusting.
Spot these cutters easily—colored grips make them stand out, so you don’t lose them.
The black finish prevents glare that can interfere with precision work under bright light and magnification.
These sets include four cutters, each with a different head shape.
The grips on these cutters drain static from your application, preventing buildup from electrostatic discharge (ESD).
These tools divert static electricity faster than our other static-control wire cutters.
The specially designed internal spring provides constant, uniform tension for superior performance.
Tungsten carbide cutting edges are bonded to the jaws for long life.
Make cuts easily and comfortably while protecting sensitive equipment from static discharge.
Made of aluminum-bronze that is Factory Mutual approved, these cutters inhibit sparking and are nonmagnetic and corrosion resistant.
Good for high-volume cutting and trimming.
These cutters have insulated grips to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.
A double hinge provides high cutting force with low gripping pressure.
Plastic-cushioned grips make these cutters easy to hold during repeated cuts.
The carbide-tipped steel jaws stay sharp longer than standard steel jaws. You can sharpen them as they wear. These cutters have a double hinge that provides high cutting force with low gripping pressure.
Cut hard steel wire, nails, and small rivets close to the surface with the wide, flat jaws on these cutters.
Insulated handles protect against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.
Make accurate, flush cuts through small wire with these tweezer-style cutters.
Also known as nippers, these cutters have wide, flat jaws that cut steel wire and bolts close to the surface.
Cut thin, hard wire with these small cutters.
These powerful cutters make diagonal cuts with a nipping action to cut extra-hard wire with ease.
Handle is angled 30° to keep work in sight and hands clear of the work surface. Blades are flat on one side for close-to-the-surface cuts.
The small size and spring-loaded jaw lets you make quick cuts with one hand.
Slice through bolts and chain with low effort.
With a short-nosed jaw, these cutters force the material being cut deeper into the jaw for maximum leverage. The short jaw also allows you to cut one side of a chain link or padlock hasp without hitting the other side.
Cut medium steel chain and hard steel bolts, rods, screws, rivets, nails, bars, wire, and rebar.
Blades are flat on one side for close-to-the-surface cuts.
These small scissors have narrow, sharp tips for fine cutting and trimming.
Also known as electricians' shears, the back edge of the blade has a file to clean contacts.
Insulated handles protect against shock from accidental contact with live electrical circuits. These scissors are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.
Cut and strip wire in tight spaces with the compact tips on these scissors.
Protect sensitive equipment from harmful static discharges while cutting and stripping wire.
Cut through the strong fibers of Kevlar.
For extra leverage to cut through Kevlar, metal, and plastics, these scissors have long handles and short blades.
After each cut, the jaws spring open to make continuous cutting easy.
Made of aluminum-bronze that is FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use them to pull, bend, and cut wire.
Avoid the potential for an arc flash or short circuit that can occur when using conventional insulated tools with metal components. Completely metal-free, these pliers are plastic with ceramic cutting blades. They are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. Use to pull, bend, and cut wire.
Also known as lineman’s and combination pliers, use these tools to pull, bend, and cut wire.
Extra-long handles enable access to hard-to-reach areas. Also known as lineman’s and combination pliers, use these tools to pull, bend, and cut wire.
When there isn't clearance to use standard-grip pliers, the angled head on these tools gives you access. Also known as lineman’s and combination pliers, use them to pull, bend, and cut wire.
Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. Use them to pull, bend, and cut wire.
Additional features, such as wire terminal crimpers, enable you to perform a variety of electrical wiring and installation work with a single tool. Also known as lineman’s and combination pliers, these pliers have long jaws that pull, bend, and cut wire and other small workpieces.
Deep serrations provide the firm grip necessary for pulling rebar tie wire, and the hook-shaped handle end keeps your hand from slipping off. Also known ironworkers’ pliers, these tools also bend and cut wire.
Secure a lanyard to the ring on the handle to prevent dropping your pliers when working at height. Use these tools to pull, bend, and cut wire.
Made of stainless steel or titanium, these pliers are good for environments where moisture and other contaminants are present.