Attach conduit to a knockout in an outlet box or enclosure.

Connect different sizes of conduit.

Thicker corrugations make this conduit more crush resistant than standard flexible plastic conduit.

Attach conduit to a knockout in an outlet box or enclosure.

Also known as FMC, this conduit offers the crush resistance of metal combined with flexibility to handle bends in tight spaces.

Join pieces of conduit.

Attach conduit and armored cable to a knockout in an outlet box or enclosure.

Join pieces of conduit.

The spiral design makes this conduit more flexible than abrasion-resistant liquid-tight flexible plastic conduit.

Even in temperatures as low as -50° F and as high as 220° F, this conduit stays flexible.

Run conduit in food areas—the cover can be cleaned and sterilized without weakening or splitting. This conduit meets NSF/ANSI standard 169 for special-purpose food equipment.

In addition to resisting oil, this conduit resists lubricants and grease.

Covered with a copper braid, this conduit protects wire and cable from electromagnetic interference (EMI) caused by motors and other equipment.

Join pieces of conduit.

Connect different sizes of conduit.

The most corrosion-resistant thin-wall conduit we offer, use this along walls and ceilings in food-processing and chemical plants.

Join pieces of conduit.

Attach conduit to a knockout in an outlet box or enclosure.

Also known as conduit bodies, these ports provide access to wire and cable inside PVC conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

Connect different sizes and genders of conduit.

Connect to the end of conduit or a fitting to protect wires from abrasion when being pulled.

Reduce the knockout size in an outlet box or enclosure so you can attach a different size of conduit to it.

Seal out moisture while reducing the knockout size in an outlet box or enclosure so you can attach a different size of conduit to it.

This impact- and crush-resistant conduit is also known as galvanized rigid conduit (GRC).

Connect different sizes of conduit.

This nonmagnetic aluminum conduit withstands damp and corrosive environments.

Join pieces of conduit.

Join pieces of conduit.

Attach conduit to a knockout in an outlet box or enclosure.

One end twists into a piece of conduit for a quick connection; the other end attaches to a knockout in an outlet box or enclosure.

These fittings seal out liquid when used with continuous-flex liquid-tight plastic conduit.

Secure threaded plastic conduit fittings to a knockout in an outlet box or enclosure.

Transition between types of conduit.

Faster to install than standard slotted wire duct, attach this to flat, clean surfaces.

Route wire and cable around curves with this bendable wire duct.

Surface mount with the adhesive back to route low-voltage data and control cable where you can't get inside walls.

Insert and remove cable at any point along the length of this open-top, hook-shaped raceway.

This raceway system is also known as wireway and wire trough.

Gaskets on the covers and at connection points protect against dust as well as seeping oil and coolant.

With a top that overhangs the cover, this raceway keeps out rain. It is rated NEMA 3R for protection from liquids and light splashing.

These cable ramps are strong enough to withstand equipment traffic.

These cable ramps handle heavy pedestrian and equipment traffic.

Lay your cable in the slit on the top so it stays off the floor.

With the widest channels of any of our cable ramps, these ramps can span large cable, hose, and pipe.

Made of nylon, this sleeving is the most impact- and abrasion-resistant slit corrugated sleeving we offer. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them.

Rated UL 94 V-2, this sleeving resists combustion and minimizes the spread of flames. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. It has impact and abrasion resistance similar to conduit, with more flexibility.

The two halves of this sleeving nest into each other, fully enclosing contents. It has interlocking ridges that overlap to keep out dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

This sleeving reflects heat away from contents and withstands temperatures up to 900°F. The corrugated construction gives it impact and abrasion resistance similar to conduit, but with more flexibility.

Use this PTFE sleeving in applications where temperatures reach up to 500° F.

This sleeving withstands temperatures up to 390°F and is often used to insulate connections in transformers and relays. It prevents electricity and heat from dissipating from wire and cable.

A silicone rubber coating on this fiberglass sleeving protects against sparks and molten metal splash.

Tight braiding makes this sleeving resistant to fraying when cut with scissors. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Reduce the likelihood of slipping in high-traffic areas. This sleeving has thick, nonslip fibers that create friction so it doesn’t slide when you step on it. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Tested to meet MIL-STD-202, this sleeving meets performance standards for flame retardance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Rated UL 2024 and NFPA 262, this sleeving is approved for use in plenum spaces such as duct work and above a drop ceiling. It self-extinguishes and emits minimal amounts of smoke and gas during combustion. Stretch to fit over items for easy installation; it tightens around its contents for a secure fit.

Tightly braided nylon fibers give this sleeving excellent abrasion resistance. As it wears, the fibers frizz and make the outer wall thicker for improved protection.

Unlike fiberglass and silica, this sleeving won't irritate skin, so it's easier to handle. It has a temperature rating of 1100° F or higher.

With a temperature rating of 1800°F or higher, this sleeving can withstand hotter temperatures than fiberglass and most ceramic.

Made of PTFE, this sleeving has excellent resistance to chemicals and acids. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.

Made with a self-extinguishing additive, this sleeving will not produce fumes when exposed to open flame or high temperatures. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.

A strip of hook-and-loop creates a strong seal along the entire length of this sleeving, yet it can be opened at any point to access contents. Use it to wrap around wire, cable, or hose without disconnecting them.

Organize and protect the cables on your Universal Robots arm without hindering its movement.

The tightly braided construction makes this polyester sleeving abrasion resistant. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

Made of aluminum with a fiberglass liner, this sleeving reflects heat away from contents and withstands temperatures up to 390°F. A slit along the entire length makes it easy to install around wire, cable, and hose without disconnecting them.

Unlike traditional sleeving that bunches wire and cable into a circle, this sleeving holds them flat, so it’s good for tight spaces such as vehicle interiors. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

A mica and silicone rubber blend allows this sleeving to withstand temperatures up to 2100° F. It can be quickly applied to hose or cable like tape, so it's a good option for emergency patches.