Connectors come assembled with wire leads already installed so they can be quickly added to existing wiring systems. Each set includes one male plug and one female socket. A locking tab keeps them securely in place when mated.

For technical drawings and 3-D models, click on a part number.

Configure a connector for your application—combine housings with pins and sleeves for different wire sizes.

Housings have a locking tab to form a secure connection when mated.

Insertion tools (sold separately) are helpful for assembling small wires.

Extraction tools (sold separately) release the locking mechanism on pins and sleeves to remove them from housings.

Crimpers (sold separately) are required for wire installation.

For technical drawings and 3-D models, click on a part number.

Stack housings and lock them together to form a connector with as many poles as you need. Connectors have a slotted dovetail on each side—align the slots and slide the housings together to lock. An internal stainless steel spring ensures that the pins maintain constant pressure. Current rating is based on a single-pole configuration using the largest wire shown within each range. Also known as power-pole connectors.

Enclosures (sold separately) hold four connectors.

For technical drawings and 3-D models, click on a part number.

Also known as weather-pack connectors, these can withstand moisture, harsh engine fluids, and high temperatures. They have wire seals to provide an environmental seal between the wire and pin or sleeve. Use them in construction, off-road, and agricultural equipment. Each set includes a plug and a socket.

An extraction tool (sold separately) is required to release the locking mechanism on pins and sleeves so that they can be removed from the housing.

A crimper (sold separately) is required for wire installation. The ratcheting crimper applies the correct pressure to every crimp.

For technical drawings and 3-D models, click on a part number.

Quickly replace or add connectors to an existing wiring system—connectors come assembled with wire leads already installed. Also known as weather-pack connectors, they can withstand moisture, harsh engine fluids, and high temperatures. All have wire seals to provide an environmental seal between the wire and pin or sleeve. Use them in construction, off-road, and agricultural equipment.

For technical drawings and 3-D models, click on a part number.

Configure a connector for your application—combine housings with pins and sleeves for different wire sizes. Also known as weather-pack connectors, they can withstand moisture, harsh engine fluids, and high temperatures. Use them in construction, off-road, and agricultural equipment.

Wire seals provide an environmental seal between the wire and pin or sleeve.

Hole plugs fill unused sleeves to keep out dust.

An extraction tool (sold separately) is required to release the locking mechanism on pins and sleeves so that they can be removed from the housing.

A crimper (sold separately) is required for wire installation. The ratcheting crimper applies the correct pressure to every crimp.

For technical drawings and 3-D models, click on a part number.

A high current rating makes these connectors suitable for use in industrial machinery and floodlights. Current rating is based on using these connectors with the largest size 194° F rated cable in the wire size range given; current ratings decrease as the cable size decreases. The housing is shatter- and crack-resistant rubber so they can withstand rough environments. Push and twist to join plugs and sockets. When mated, they form a vibration-resistant connection to prevent accidental disconnection. Rated NEMA 3R, they protect against falling liquids and light splashing.

Adapters (sold separately) allow you to change the connector’s gender and make multiple connections from a single power source.

Caps (sold separately) protect connectors when not in use.

For technical drawings and 3-D models, click on a part number.