Mount these terminals on a threaded screw or stud for a more secure connection than spade and hook terminals.

Mount these elongated ring terminals on a range of threaded screw and stud sizes—their connection is more secure than spade or hook terminals.

With a heat-resistant PVDF cover on the barrel, these terminals are best for high-temperature applications where you want to prevent short-circuiting with nearby wire.

When heat is applied, the enclosed solder melts, creating the most secure, electrically conductive, and environmentally sealed connection we offer.

Thicker than standard ring terminals and noninsulated, these terminals are best when you need durability and to easily inspect the wire connection.

A serrated edge on the inside of the ring grips the mounting screw for a secure hold.

Save preparation time—these cords are ready-to-use with ring terminals on each end of a single-conductor wire.

Add strength and stability to stranded wire to protect it from damage and speed insertion into terminal blocks.

A plastic cover on the barrel provides electrical insulation to prevent short-circuiting with nearby wire. Convenient for applications that require frequent connections, these terminals slide together and pull apart with ease.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated. When heat is applied, the insulation shrinks, forming a seal to keep out water and contaminants. The enclosed solder also melts when heated, creating the most secure and electrically conductive connection we offer.

Easy to install, connect, and disconnect, yet difficult to shake loose. These terminals interlock with each other to make a secure connection.

Rated UL 94 V-0 for flame resistance, these terminals are made of flame-retardant, self-extinguishing material to reduce the risk of fire.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

These terminals withstand temperatures up to 900° F.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

Loosen your mounting screw to install—the open end eliminates the need to completely remove it.

When heat is applied, the enclosed solder melts and the insulation shrinks, creating the most secure, electrically conductive, and environmentally sealed connection we offer.

Connect wire to a screw or stud at a right angle to fit connections into tight spaces.

These solid pins make it easier to insert stranded wire into screw-clamp connections.

Also known as bullet terminals, these have a round tab that requires less space than the flat tab found on most quick-disconnect terminals.

A hybrid of ring and spade terminals, these install without removing the mounting screw, yet resist being pulled off.

Turn screw and stud terminals into quick-disconnect connections.

Use a compression tool to attach lugs to wire. Mount them to a screw.

The straight tongue improves conductivity by increasing the surface contact between the lug and your equipment.

Prevent accidental contact with other connections.

Tighten the screw with a ¼" hex key wrench for a more secure connection than Hammer-On Welding Lugs.

Twist stripped wires together, insert them into the connector, and then crimp for a dependable connection.

Press down on the clamp to connect wires and pull it up to disconnect.

Make a quick, secure wire connection without crimping.

Suitable for use in tight spaces, these connectors have a narrow profile that takes up less space than standard wire splicing connectors.

Filled with silicone, these connectors seal out moisture and prevent corrosion.

Grip the wings on these connectors to increase leverage when tightening.

Suitable for use underground, these connectors consist of a twist-on wire connector and an abrasion- and moisture-resistant insulator tube.

The most secure, electrically conductive, and environmentally sealed connection we offer, these splices have enclosed solder that melts when heat is applied.

A plastic cover fully insulates these splices.

Crimp the barrel twice on each end for an extra-tight grip in high-vibration applications. A plastic cover fully insulates these splices.

These splices are filled with a sealant that creates a barrier to completely keep out moisture when splices are crimped.

Able to withstand temperatures up to 900°F, these splices are suitable for use in high-heat applications such as ovens, motors, and light fixtures.

These splices can withstand higher temperatures than insulated splices.

When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a watertight seal.

Sealed threads make these splices weather resistant.

With a ring of solder on the inside, these heat-shrink splices create secure, water-resistant connections between wires without the need for a crimping tool.

A plastic cover fully insulates these splices and it's clear so you can visually confirm the connection.

Make watertight connections for underground applications.

For use with a compression tool, these splices are color-coded to match compression dies.

Pierce the insulation of wire without stripping it to make quick connections that are also sealed to keep out water.

Tap and splice multiple wires in temporarily wet environments and up to six feet underground.

Use a single splice to connect more than two wires.

These wire taps meet UL 94 V-2 for flame retardance.

Tap a main wire or add a finished terminal to the end of a wire.

Use the included crimping tool to install a variety of terminals and butt splices.

Keep a variety of ring terminal sizes on hand.

Thicker walls than standard battery terminal lugs make these more durable.

When heat is applied, the flux and solder mixture creates a metallic bond that is nearly twice as strong as crimping or compression connections.

Connect these clamps to cable with a crimping tool or by soldering.

Made of lead, these clamps resist corrosion to stand up to marine environments. Use a lug to attach your cable to the stud.

Connect these clamps to a wide range of wire sizes.

A single row of terminals fits in narrow spaces.

Recessed screw terminals prevent you from accidentally connecting two circuits with a screwdriver or other tool, causing a short.

Best for equipment requiring regular servicing, these blocks disconnect without having to remove any wiring thanks to their plug-and-socket design. Their recessed screws prevent shorts by reducing the risk you’ll connect two circuits with a screwdriver or other tool.

Blocks mount in a cutout and have terminals on both sides.

Rated IP20, these blocks have recessed terminals to prevent accidental contact with live circuits.

Use with DIN 2 rail. Add as many circuits as you need with these terminal blocks and accessories.

Quickly troubleshoot or change wiring without any tools. These terminal blocks have a lever clamp that you flip up to insert wiring and flip down to lock it in place.

One of the connections on these terminal blocks is a socket instead of a traditional terminal, making it easy to swap out equipment or change your wiring even in small enclosures. Instead of having to attach wire inside the tight space of your enclosure, you can wire a connector wherever it’s easiest and then plug it into the socket.

Inspect the terminal block and wiring without opening the cover.

With the help of distribution blocks, you can take a high-current wire from your power source and connect it to one or more electrical devices.

Build your own distribution system by adding terminal blocks to these bars.

Distribute up to 150 amps from the center stud terminal to the eight screw terminals around it.

Minimize signal loss between low-current devices with M8 connections.

Block signal interference from nearby devices, such as motors and transmitters, while maintaining a strong, stable connection for M12 threads.

Often used to send power and signal to automated systems, motors, and pumps, these mini connectors carry higher currents than M5, M8, and M12 connectors.

Screw these micro M16 connectors together to securely connect equipment.

Push these connectors together to quickly create signal and data connections in tight spaces. They need less space to mate than screw-together connectors, which require two hands to twist them in place.

Quickly replace or add connectors to an existing wiring system—connectors come assembled with wire leads already installed. Also known as weather-pack connectors, they withstand moisture, harsh engine fluids, and high temperatures.

Use these connectors in vehicles and other agricultural and construction equipment. They have a sealed nylon housing that resists dust and temporary submersion.

Deliver power to welding cable. These connectors withstand the high temperatures and high current found in welding applications.

Configure a connector for your application—combine inserts for power and signal with a base and a hood.

Often used with thermosensors or brakes on large motors, these carry more than twice the current of standard latching connectors.

The smallest latching connectors we offer, these fit in tight spaces. The base and hood latch together securely, yet can be quickly detached for equipment repair or replacement.

Carry up to four times the current of standard Compact Latching Connectors. The base and hood latch together securely, yet can be quickly detached for equipment repair or replacement.

Connectors come assembled with wire leads already installed, so they can be quickly added to existing wiring systems. Use them with AMP MATE-N-LOK connectors.

A good fit for tight spaces, these are smaller than standard straight-blade plugs. Also known as NEMA midget plugs.

Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation and grip the wire securely. Access the wire connection by opening the hinged housing.

Access the wire connection by opening the hinged housing. These connectors have screw terminals to create a secure connection; wire must be stripped before winding around the screw terminal.

Visually confirm that connectors have power; they have an indicating light that is visible from any angle.

An indicating light that is visible from any angle lets you know when these plugs have power. They have an extra-tight fit when mated with a receptacle to withstand high vibration. Also known as hospital grade plugs.

A rubber housing protects these connectors from damage caused by drops and impact.

Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation. When mated with a receptacle, these plugs have an extra-tight fit to withstand high vibration. Also known as hospital grade plugs.

Add a fuse to protect equipment from current overload. When mated with a receptacle, these plugs have an extra-tight fit to remain secure in high vibration environments. They're also known as hospital grade plugs.

Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments.

Pair these connectors with standard IEC power cords to bring power into or out of your electronic devices.

Use these general purpose connectors indoors in high vibration applications. A quarter turn locks them together when mated to remain secure in high-vibration applications.

A rubber housing protects these connectors from damage caused by drops and impact. They turn to lock together when mated to prevent accidental disconnection.

Also known as twist-lock devices, these connectors withstand tough, repetitive use, and are more durable than standard turn-lock connectors. They turn to lock together when mated to prevent accidental disconnection.

Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments. These connectors turn to lock together when mated to prevent accidental disconnection.

When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.

Stack as many connectors on top of each other as needed—the housings clamp together to form a secure attachment.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded. They turn to lock together when mated to prevent accidental disconnection.

These general purpose M23 connectors send power or signal to servomotors, servocontrollers, and servodrives.

Connect and disconnect with the power on—spring-loaded contacts open like a switch when separating the connectors, preventing an electrical arc.

These connectors meet international standards IEC 309-1 and 309-2. They prevent an electrical arc when separating mated connectors, so you can safely connect and disconnect with the power on.

Reduce the number of electrical connections in sanitary areas, such as food plants—these connectors combine Ethernet, a power cable, and wire for signals into a single connection point.

With thick threads similar to a light bulb, these connectors take only a few turns to lock into place for a secure connection in washdown and high-vibration areas. Detach them just as quickly for frequent maintenance.

These connectors meet MIL-DTL-26482, so they're compatible with other products that meet the same standard. Quickly mate by pushing them together.

Rated to MIL-DTL-5015 specifications, these connectors are compatible with other products that meet the same standard. They screw together for a secure connection.

These connectors have the same pin and socket configuration as connectors that meet MIL-DTL-26482, so they can be used with products that meet the same standard. Quickly mate them by pushing them together.

A current rating up to 400 amps makes these connectors suitable for use in industrial machinery and floodlights.

Connect one end to a fixture and the other to a ballast. These connectors allow you to safely disconnect a failed ballast without exposing you to live wires.