Filter by
Application
Wire Rope Construction
Attachment Type
Fitting Type
Color
Material
Finish
Military Specification
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
Required Installation Tool
Required Torque
Rope Capacity Adjustment Factor
Specifications Met
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
Wedge-Lock Wire Rope End Fittings—For Lifting
 |  |
Also known as open wedge sockets, these end fittings require only a torque wrench to install. To install, wrap the wire rope around the removable wedge before securing it inside the body. A wire rope clamp attached through the top hole in the wedge secures the short (dead) end.
Two additional holes at the bottom of the wedge can be used as a "go/no go" gauge to determine the proper rope size. The wire rope should pass through the "go" hole and not through the "no go" hole.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Fittings | Replacement Wedges | Replacement Pins | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope | |||||||||||||||
Dia. | Construction | Clevis Inside Wd. | For Pin Dia. | Req. Torque, ft·lbf | Rope Cap. Adjustment Factor | Specs. Met | Mil. Spec. | Each | Each | Each | |||||
Red Painted Steel | |||||||||||||||
| 3/8" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 13/16" | 13/16" | 45 | 80% | ASME B30.26 | Fed. Spec. RR-S-550 | 3484T71 | 0000000 | 3484T81 | 000000 | 3484T47 | 000000 | ||
| 1/2" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 1" | 1" | 65 | 80% | ASME B30.26 | Fed. Spec. RR-S-550 | 3484T72 | 000000 | 3484T82 | 00000 | 3484T48 | 00000 | ||
| 5/8" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 1 1/4" | 1 7/32" | 95 | 80% | ASME B30.26 | Fed. Spec. RR-S-550 | 3484T73 | 000000 | 3484T83 | 00000 | 3484T49 | 00000 | ||
| 3/4" | 6 × 19 Fiber Core 6 × 19 IWRC 6 × 26 IWRC 6 × 37 IWRC 6 × 7 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 1 1/2" | 1 13/32" | 130 | 80% | ASME B30.26 | Fed. Spec. RR-S-550 | 3484T74 | 000000 | 3484T84 | 00000 | 3484T51 | 00000 | ||
