McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    16 Products
    About Wire Sleeving
    industrial info icon

    Select the right sleeving to protect your wires against heat, abrasion, corrosion, and impact.

    Hook and Loop Wraparound Wire Sleeving

    A strip of hook and loop creates a strong seal along the entire length of this sleeving, yet it can be opened at any point to access contents. Wrap it around wire, cable, and hose without disconnecting them.
    Nylon Fabric with Polyurethane Rubber-Coated, -20° F to 180° F
    Image of Product. Front orientation. Nylon Fabric. Hook and Loop Wraparound Wire Sleeving.
    Nylon fabric sleeving is made of tightly braided fibers for excellent abrasion resistance. It has the toughness of metal, yet remains flexible.
    Polyurethane rubber-coated nylon sleeving works well outdoors, resisting both moisture and UV rays. It also stands up to chemicals and oil.
    ID
    Wall
    Thk.
    Color
    5 ft.
    Long
    10 ft.
    Long
    25 ft.
    Long
    50 ft.
    Long
    1"1/32"Black70085K12100000000000000000000000000
    1 1/2"1/32"Black70085K1250000000000000000000000
    2"1/32"Black70085K1290000000000000000000000

    Interference-Shielding Wraparound Wire Sleeving

    Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. A sewn-in ground wire dissipates any stored charge. It provides good protection against abrasion. Wrap it around wire and cable without disconnecting them; sleeving has a slit along the entire length.
    Adhesive-Strip Closure
    Sleeving with an adhesive strip closure is permanently sealed when the adhesive is applied.
    Polyurethane Rubber—Polyurethane rubber sleeving provides excellent resistance to solvents, oil, and grease.
    Foil Shield—Sleeving with foil shielding is for use in stationary applications. Repeated flexing will damage the foil.
    Conductive-Cloth Shield— Sleeving with conductive cloth shielding can withstand continuous motion without tearing or fraying. It’s often used to protect wire, cable, and hose in robotics and other automated applications.
    UL 2556 VW-1—Flame rated VW-1 sleeving meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.
    Per Ft.
    ID
    Wall
    Thk.
    Temp. Range,
    ° F
    Certification
    Flammability
    Rating
    Features
    Color
    Choose a Length, ft.
    1-24
    25-Up
    Polyurethane Rubber with Foil Shield
    Image of Product. Front orientation. Wire Sleeving. Interference-Shielding Wraparound Wire Sleeving, Adhesive-Strip Closure, Foil Shield.
    3/8"1/64"-65 to 250UL Recognized Component
    		UL 2556 VW-1
    		Ground WireBlack1, 2, 5, 10, 257940K31000000000000
    1/2"1/64"-65 to 250UL Recognized Component
    		UL 2556 VW-1
    		Ground WireBlack1, 2, 5, 10, 257940K320000000000
    1"1/64"-65 to 250UL Recognized Component
    		UL 2556 VW-1
    		Ground WireBlack1, 2, 5, 10, 257940K330000000000
    1 1/2"1/64"-65 to 250UL Recognized Component
    		UL 2556 VW-1
    		Ground WireBlack1, 2, 5, 10, 257940K340000000000
    2"1/64"-65 to 250UL Recognized Component
    		UL 2556 VW-1
    		Ground WireBlack1, 2, 5, 10, 257940K350000000000
     
    Polyurethane Rubber with Conductive-Cloth Shield
    Image of Product. Front orientation. Wire Sleeving. Interference-Shielding Wraparound Wire Sleeving, Adhesive-Strip Closure, Conductive-Cloth Shield.
    3/8"1/64"-45 to 250——Ground WireBlack1, 2, 5, 10, 257940K410000000000
    1/2"1/64"-45 to 250——Ground WireBlack1, 2, 5, 10, 257940K420000000000
    1"1/64"-45 to 250——Ground WireBlack1, 2, 5, 10, 257940K430000000000
    1 1/2"1/64"-45 to 250——Ground WireBlack1, 2, 5, 10, 257940K440000000000
    2"1/64"-45 to 250——Ground WireBlack1, 2, 5, 10, 257940K450000000000
     

    Hook and Loop Wraparound Wire Sleeving for Universal Robots

    Organize and protect the cables and tubing on your Universal Robots arm without hindering its movement. This sleeving is made for Universal Robots arms, so you don’t need to measure, cut, or customize for a good fit. The hook and loop closure makes installation quick, and unlike cable ties, it’s easy to detach and adjust. Cables run through a separate channel, so you can access them without removing the sleeving from your arm. Made from polyurethane, this sleeving is flexible enough for cables and tubing to move easily, and durable enough to withstand continuous movement. It’s also lighter than hose carriers and conduit, so it won’t weigh down your robot arm. Each includes two pieces of sleeving.
    Polyurethane Rubber
    Image of ProductInUse. Front orientation. Wire Sleeving. Hook and Loop Wraparound Wire Sleeving for Universal Robots.
    Image of Product. Front orientation. Wire Sleeving. Hook and Loop Wraparound Wire Sleeving for Universal Robots.
    ID
    Wd.
    Lg.
    Wall
    Thk.
    Temp. Range,
    ° F
    Features
    Cable Opening
    Wd.
    Color
    Each
     
    For UR3 and UR3e Robot Arms
    2 1/8"
    2 5/8"    		3 1/4"
    3 1/4"    		10 7/8"
    12 3/8"    		0.018"-60 to 200Cable Channel1"Black6280N1110000000
     
    For UR5 and UR5e Robot Arms
    3"
    3 3/8"    		8"
    8"    		13 1/2"
    14 3/4"    		0.018"-60 to 200Cable Channel1"Black6280N112000000
     
    For UR10 and UR10e Robot Arms
    3 3/8"
    4 1/4"    		14"
    14"    		14 7/8"
    17 3/4"    		0.018"-60 to 200Cable Channel1"Black6280N113000000
     
    back to top