Leverage points in both the jaws and the handle give you more power with less effort.

These cutters are stainless steel, which provides excellent corrosion resistance.

The grips on these cutters drain static from your application, preventing buildup from electrostatic discharge (ESD).

The specially designed internal spring provides constant, uniform tension for superior performance.

A double hinge provides high cutting force with low gripping pressure.

Insulated handles protect against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Sharpen or replace the jaws as they wear. These cutters have a double hinge that provides high cutting force with low gripping pressure.

Precisely position and flush-cut copper, gold, silver, and magnetic wire.

These powerful cutters make diagonal cuts with a nipping action to cut extra-hard wire with ease.

A small grip enables one-handed cutting.

Cutters have double hinge that provides high cutting force with low gripping pressure.

Keep your hands in a comfortable position so you can apply more force for cutting.

These manually operated cutters make a clean cut with just a few pumps of the handle.

The small size and spring-loaded jaw lets you make quick cuts with one hand.

Blades are flat on one side for close-to-the-surface cuts.

With a short-nosed jaw, these cutters force the material being cut deeper into the jaw for maximum leverage. The short jaw also allows you to cut one side of a chain link or padlock hasp without hitting the other side.

Slice through bolts and chain with low effort.

A double hinge provides high cutting force with low gripping pressure. These cutters are also known as aviation snips.

Blades are high-speed steel so they stay sharp longer than steel blades, and they can be sharpened.

This cutter has two blades that cut a 13/64" wide strip—peel it back for smooth edges with little distortion.

These cutters make straight cuts and curves.

Made from aluminum bronze, the blade and handle on these cutters inhibit sparking and are FM approved. Use them for straight cuts.

Also known as bulldog snips, these durable cutters have long handles and short blades for cutting heavy material in any direction.

Also known as slotting shears, these cutters have a double blade that creates two cuts and a 7/32" wide waste strip that peels back, leaving two smooth edges with little distortion.

Minimize material loss and edge distortion with these scissor-like cutters that cut metal up to 1/64" thick.+

Make straight, clean cuts in thick sheet metal.

This large-capacity cutter has a 25" blade for long, straight cuts.

Leave clean cut edges in a variety of pliable materials.

Use these one-handed cutters on small-diameter aluminum and copper power and communication cable.

Cut armored cable such as BX, HCF, and MC and flexible metal conduit.

Insulated handles protect against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Minimize hand fatigue with a lightweight handle and spring-action that automatically opens the blades for quick repeat cuts.

For a long-lasting cutting edge that's three times harder than uncoated stainless steel, the blades on these scissors are titanium bonded over stainless steel.

Longer handles and shorter blades give you more leverage than other scissors to cut tough materials such as leather, rope, and thick cardboard.

Blades are ceramic to stay sharp longer than metal blades.

Blades are titanium bonded over stainless steel for a sharp, long-lasting cutting edge, and they have narrow, sharp tips for fine cutting and trimming.

Trim flush against a flat surface with the curved blades on these small scissors.

These small scissors have narrow, sharp tips for fine cutting and trimming

With high-carbon stainless steel blades, these scissors cut through fiber-optic and electrical cables, even those that are made with Kevlar. They’re also good for cutting wire jackets and cable ties.

Insulated handles protect against shock from accidental contact with live electrical circuits. These scissors are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

After each cut, the jaws spring open to make continuous cutting easy.

Jaws open automatically for ease of use.

Unfold these multitools to access the pliers.

Smooth, consistent movement ensures precision. These assorted pliers have slip-resistant ultra grips that are shaped to fit comfortably in your hand and reduce strain in repetitive tasks. They are also known as miniature and electronics pliers.

Choose these stainless steel pliers for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

Colorful plastic grips make these assorted pliers stand out, so they’re less likely to be misplaced.

Grip, bend, and twist wire and other small workpieces. Also known as needle-nose and chain-nose pliers, these tools have long, tapered jaws.

Additional features, such as wire terminal crimpers and wire stripping holes, enable you to perform a variety of electrical wiring and installation work with a single tool.

Colorful plastic grips make these tools stand out, so they're less likely to be misplaced.

Made of materials that are FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Deep serrations provide the firm grip necessary for pulling rebar tie wire, and the hook-shaped handle end keeps your hand from slipping off. Also known ironworkers’ pliers, these tools also bend and cut wire.

Extra-long handles enable access to hard-to-reach areas. Also known as lineman’s and combination pliers, use these tools to pull, bend, and cut wire.

Additional features, such as wire terminal crimpers, enable you to perform a variety of electrical wiring and installation work with a single tool. Also known as lineman’s pliers, use them to pull, bend, and cut wire.

Secure a lanyard to the ring on the handle to prevent dropping your pliers when working at height. Use these tools to pull, bend, and cut wire.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. Use them to pull, bend, and cut wire.

Squeeze the handles and the jaws automatically adjust to fit a workpiece and lock in place.

Curved jaws grip bolt heads and nuts with rounded corners. These pliers lock in a vise-like grip and stay clamped in place, leaving your hands free.