Push stripped wires into connectors for a reliable connection that's faster to install than twisting or crimping.

Rated to 300° F, these connectors are an excellent choice for use in high-temperature applications such as HID lighting and electric heat.

Filled with silicone, these connectors seal out moisture and prevent corrosion.

Large enough to be used with a wide range of wire sizes, these connectors can still fit into cramped outlet boxes.

Suitable for use underground, these connectors consist of a twist-on wire connector and an abrasion- and moisture-resistant insulator tube.

No wire stripping is required—these connectors will pierce the insulation.

Twist stripped wires together, insert them into the connector, and then crimp for a dependable connection.

Tap and splice multiple wires in temporarily wet environments and up to six feet underground.

Use a single splice to connect more than two wires.

A plastic cover fully insulates these splices and it's clear so you can visually confirm the connection.

Make watertight connections for underground applications.

The most secure, electrically conductive, and environmentally sealed connection we offer, these splices have enclosed solder that melts when heat is applied.

These splices can withstand higher temperatures than insulated splices.

Visually confirm your connection through the inspection window in the insulation of these splices.

Filled with grease, these splices resist moisture and corrosion.

These splices are filled with a sealant that creates a barrier to completely keep out moisture when splices are crimped.

When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a watertight seal.

These splices can withstand higher temperatures than insulated splices.

Sealed threads make these splices weather resistant.

With a ring of solder on the inside, these heat-shrink splices create secure, water-resistant connections between wires without the need for a crimping tool.

Pierce the insulation of wire without stripping it to make quick connections that are also sealed to keep out water.

For use with a compression tool, these splices are color-coded to match compression dies.

Filled with gel, these wire taps seal out moisture.

Tap a main wire or add a finished terminal to the end of a wire.

Use the included crimping tool to install a variety of terminals and butt splices.