Wire Supports | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	For Use Outdoors For Use Outdoors

Yes

	Center-to-Center Center-to-Center

Forward

How can we improve?

7,122 Products

Loop Clamps

Vibration-Damping Loop Clamps

A cushion covering the clamp reduces vibration and wear from clamp edges. Clamps surround lines of pipe, tubing, and conduit completely while holding them close to the mounting surface.

Multiline Vibration-Damping Loop Clamps

Organize multiple lines of pipe, tubing, and conduit with one clamp. Wider than standard loop clamps, multiline loop clamps surround two lines of material to create a secure grip while holding the lines close to the mounting surface. A cushion covering the clamp reduces vibration and wear from clamp edges.

Snug-Fit Vibration-Damping Loop Clamps

A molded cushion reduces vibration and wear from clamp edges, plus it provides a tighter fit around material than standard vibration-damping loop clamps.

Plastic Loop Clamps

Compared to metal loop clamps, plastic loop clamps reduce wear on soft materials, such as tubing and cable. Clamps are nonconductive and noncorrosive.

Loop Clamps

These clamps completely surround single lines of pipe, tubing, and conduit while holding them close to the mounting surface.

Multiline Loop Clamps

Plastic Routing Clamps

Multiline Plastic Routing Clamps

Organize multiple lines of pipe, tubing, or hose with a single clamp. They are polyethylene for good chemical and UV resistance.

Plastic Routing Clamps

For use with a single line, these plastic clamps reduce wear on softer materials, such as tubing and cable, and prevent corrosion caused by metal-to-metal contact.

Snap-In Plastic Routing Clamps

Quickly mount parallel lines of pipe, hose, or tubing by clicking them into these clamps. Made of acetal, they are UV-resistant and can be used outdoors.

Chemical-Resistant Plastic Routing Clamps

For use on a single line, these polypropylene clamps withstand moisture and most chemicals. They're commonly used to route tubing in compressed air systems. A folding arm closes to secure material.

Two-Line Chemical-Resistant Plastic Routing Clamps

Route two lines of tubing with a single clamp. Commonly used in compressed air systems, these polypropylene clamps withstand moisture and most chemicals. They have a folding arm that closes to secure material.

Connectable Plastic Routing Clamps

Join these clamps together to line up multiple pipes, cables, or tubes side-by-side, even when they are different sizes.

Adhesive-Back Plastic Routing Clamps

Backed with foam adhesive tape, these clamps mount to any smooth surface—no fasteners required. They are noncorrosive, nonconductive nylon.

Plastic Expansion Routing Clamps

Flexible grooves inside these polypropylene clamps allow material to expand and contract. Clamps are moisture and chemical resistant.

Lock-Close Strut-Mount Plastic Routing Clamps

Slide these clamps into strut channel and snap closed for quick installation with no tools required. They are noncorrosive, nonconductive nylon.

Vibration-Damping Routing Clamps

Strut-Mount Vibration-Damping Routing Clamps

Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.

Weld-Mount Vibration-Damping Routing Clamps

For a more secure connection than rail- and adhesive-mount clamps, weld the bottom plate of these clamps onto your rails. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.

Two-Line Weld-Mount
Vibration-Damping Routing Clamps

Secure two pressurized hydraulic lines with a single clamp to lessen vibration in hydraulic systems. Weld the bottom plate onto the mounting surface for a more secure connection than rail- and adhesive-mount clamps.

Two-Line Rail-Mount
Vibration-Damping Routing Clamps

Secure two pressurized hydraulic lines with a single clamp. Mount these clamps directly onto rails, no adhesive or welding required. They fit tightly around the lines to reduce vibration.

Rail-Mount Vibration-Damping Routing Clamps

For use with a single line, these clamps mount directly onto rails, no adhesive or welding required. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.

Vibration-Damping Routing Clamps

A rubber cushion reduces vibration and wear from clamp edges. The cushion also protects lines of pipe, tubing, and conduit from corrosion caused by metal-to-metal contact.

Magnetic Vibration-Damping Routing Clamps

Temporarily route material across duct, racks, machinery, and other ferrous surfaces. Clamps fit tightly around pressurized lines in hydraulic systems to lessen vibration. Rubber cushions reduce wear from clamp edges and protect lines from corrosion caused by metal-to-metal contact.

Rails for Rail-Mount Vibration-Damping Routing Clamps

Bolt or weld these rails to the mounting surface, then attach clamps with a rail nut.

Routing Clamps

For use with a single line, these clamps brace pipe, tubing, and conduit directly against the mounting surface.

Two-Line Routing Clamps

Mount parallel lines of pipe, tubing, or conduit directly against the mounting surface.

Strut-Mount Metal Routing Clamps

Route pipe, tubing, and conduit across strut channel.

Narrow-Space Strut-Mount Metal Routing Clamps

Even when these clamps are installed side by side, the clamping screws remain accessible. Use them to route pipe, tubing, and conduit across strut channel.

Standoff Strut-Mount Metal Routing Clamps

Hold pipe, tubing, and conduit away from strut channel.

Strut-Mount Metal Routing Clamps for Insulated Pipe

Secure insulated pipe to strut channel without pinching the insulation or exposing the pipe. These clamps are sized for use with insulated pipe and have a plastic insert that creates a seal around the insulation to prevent the pipe from sweating, which can cause mold and corrosion.

Low-Profile Strut-Mount Metal Routing Clamps

For areas with low clearance, these clamps have the mounting fastener to the side of the material, rather than on top.

Cut-to-Length Routing Clamps

Customize these clamps to any object—they have a bend-and-stay design so you can mold them to the size and shape you need. Made of plastic-coated 316 stainless steel, they withstand abrasion, corrosion, and UV rays.

Adjustable Standoff Clamps

Tighten the bolt for an exact fit around material. Clamps secure vertical pipes in sanitation drain applications and prevent them from coming in contact with the mounting surface.

Routing Rings and Hooks

Routing J-Hooks

Route bundles of wire and cable through a single hook. A wide opening allows access for installation, adjustment, and removal.

Multiline Routing J-Hooks

Keep multiple bundles of wire and cable on separate hooks. The hooks have wide openings to allow access for installation, adjustment, and removal.

Routing Rings

Also known as bridle rings, routing rings have an open-eye design that allows you to quickly install wire and cable.

Nonconductive Routing Rings

These plastic rings won't conduct electricity. Also known as distribution rings, they have a large opening for routing multiple cables. A smooth surface prevents damage to wire and cable.

Wire-Mount Routing Rings

Hang cable and other flexible material beneath wire to prevent it from sagging and swaying. To install, hook the two ends of the ring around the wire—no fasteners required.

Removable Routing Ringbolts

Anchor these ringbolts where you need them, then remove the ring when not in use. Once installed, the mounting bolt stays in place. Insert the ring by threading into the mounting bolt; remove by unthreading it.

Routing S-Hooks

Hang these S-hooks from fencing and railing to route large bundles of material, such as cable, hose, and wire through your facility or worksite to avoid tripping hazards.

Magnetic Routing Ring Bases

Temporarily mount routing rings and other threaded components to steel and iron surfaces.

Routing Ringbolts

Mount these ringbolts into a threaded hole, or use the nut for through-hole mounting. The pivoting ring allows material to move freely.

Hangers for Pipe, Tube, and Conduit

Push-to-Lock Plastic Clamping Hangers

Lock your line in faster than any other hanger. These hangers automatically close when you press your line into the clamp.

Plastic Clamping Hangers

These plastic hangers prevent corrosion caused by metal-to-metal contact. Push them closed for a more secure hold on material than loop hangers.

Quick-Mount Plastic Clamping Hangers

Clip these hangers onto the side of threaded rod. Unlike other threaded-rod-mount hangers, you can use more than one hanger on the same rod to organize multiple lines of pipe, tubing, and conduit.

Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Rubber cushions fit material tightly to reduce vibration and provide a more secure hold than loop hangers. The cushions also protect material from sharp edges and prevent corrosion caused by metal-to-metal contact.

Stackable Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Connect these hangers to organize multiple lines of pipe, tubing, and conduit. The tight-fitting, santoprene body reduces vibration and prevents corrosion caused by metal-to-metal contact.

Washdown Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

These hangers provide maximum corrosion resistance in wet environments and stand up to frequent washdowns with harsh cleaners and sanitizers. Rounded edges, polished surfaces, and acorn or hex nuts that conceal threads reduce the number of places for bacteria to grow and make them easier to clean.

Snug-Hold Threaded-Rod-Mount Clamping Hangers

Load material between the two halves of the ring and adjust the side bolts for a tighter fit than standard threaded-rod-mount clamping hangers.

Stackable Threaded-Rod-Mount Clamping Hangers

Mount these hangers on top of one another to organize multiple lines of pipe, tubing, and conduit at any angle.

Threaded-Rod-Mount Clamping Hangers

Also known as conduit hangers, these hangers load from the bottom so you can add or remove material without removing the mounted hanger.

Adjustable Clamping Hangers

A time-saving alternative to strap hangers, these hangers fit a range of material sizes without any cutting and easily adjust after they’re installed.

Threaded-Rod-Mount Multiline Hangers

Route multiple lines of pipe, tubing, and conduit with a single hanger. A wide opening and locking tab allow access for installation, adjustment, and removal.

Stainless Steel Threaded-Rod-Mount Loop Hangers

Use these hangers in corrosive environments and where chemicals are present. They're also known as teardrop hangers. Combine with a threaded rod or other fastener to hang from the ceiling.

Pivoting Threaded-Rod-Mount Loop Hangers

Also known as clevis hangers, these have a pivoting loop that adjusts for line movement and vibration. Combine with a threaded rod or other fastener to hang from the ceiling.

Side-Load Threaded-Rod-Mount Loop Hangers

Access material quickly without uninstalling the mounted hanger. These hangers have a removable bolt for loading pipe, tube, and conduit from the side. Combine them with a threaded rod or other fastener to hang from the ceiling.

Pipe Cradles for Loop Hangers

Also known as pipe shields, these cradles provide additional support and prevent insulation from tearing when routing insulated pipe through loop hangers.

Swivel Threaded-Rod-Mount Loop Hangers

These hangers have a swivel nut for adjusting direction after mounting. They're also known as teardrop hangers. Combine with a threaded rod or other fastener to hang from the ceiling.

Threaded-Rod-Mount Roller Loop Hangers

A roller on the bottom of these hangers compensates for movement due to expansion and contraction, such as in hydraulic applications. Combine with a threaded rod or other fastener to hang from the ceiling.

Strap Hangers

Cut as much strap as you need to hang duct, pipe, and other materials.

Strap-Mount Clamping Hangers

Use these close-fitting hangers for a more rigid hold around material than when using straps alone.

Suspension Beams for Threaded Rod

Mount these beams across parallel roof joists to hang threaded rod and route pipe, duct, and other overhead systems in areas where there’s no anchoring point.

Weld-Mount Clamping Hangers

For a strong, secure connection, mount these hangers by welding them to a rod.

Hook-Mount Hangers

A versatile solution for temporary hanging of pipe and tubing at work sites as well as anywhere welding and fastening are not possible. Feed material through the strap, then use the D-rings to adjust the hanging height.

Clamping Hangers

Reduce movement in your line with hangers that are more rigid than strap hangers and fit tighter around pipe, conduit, and tube than loop hangers.

Tie Wire Hangers

Attach these light duty hangers to ceilings and walls. They have a stiff wire for supporting suspended ceilings and lighting fixtures.

Beam Clamps

Easy-Position Beam Clamps
for Pipe, Tube, and Conduit

Suspend material at any angle from the beam. Clamps have a fixed jaw that secures to the beam and a hanger that swivels 360° to position material and accommodate for misalignment.

Beam Clamps for Pipe, Tube, and Conduit

These clamps have a fixed hanger for rigid connections.

Beam Clamps with Tie Wire Hanger

Attach these light duty hangers to beams and other structural elements. They include a stiff wire for supporting ceilings, lighting fixtures, and other lightweight material.

U-Bolts

Vibration-Damping U-Bolts

Reduce vibration and noise in your lines—a plastic cushion tightly grips pipe, tubing, and conduit to prevent movement. Nylon-insert locknuts grip the thread to resist loosening.

Rubber-Cushioned Square U-Bolts

Reduce vibration and prevent metal-to-metal corrosion on flat-bottomed objects such as strut channel and small duct.

U-Bolt Mounting Plates

Add a mounting plate to your U-bolt for a more secure hold at the mounting surface.

U-Bolts

Mount these general purpose U-bolts into an existing bracket, or combine with a mounting plate for a secure hold at the mounting surface.

U-Bolts with Mounting Plates

A mounting plate provides a more secure hold at the mounting surface.

Nonconductive U-Bolts

These fiberglass-reinforced polyurethane U-bolts have no metal parts, so they won't conduct electricity or cause metal-to-metal corrosion.

Clamping U-Bolts

Also known as muffler clamps, these U-bolts have a rounded mounting plate that fully surrounds pipe, conduit, and tubing for a secure fit.

Square U-Bolts

Suspend and route flat-bottomed objects such as strut channel and small duct.

Rubber-Cushioned U-Bolts

A durable rubber cushion and mounting plate prevent corrosion and wear caused by metal-to-metal contact. The mounting plate is removable, so the U-bolts can be installed onto an existing line without needing to dissemble it.

Standoff Brackets

Combine with a U-bolt or routing clamp to convey a variety of material, such as pipe, tubing, and cable raceway, at distance from floors, walls, and ceilings. The extra clearance allows access for maintenance and adding and removing lines.

Strut-Mount Routing Saddles for Insulated Pipe

Clip these saddles around the outside of strut channel for a quick way to route insulated tubing and pipe. Lips on either end of the saddle protect insulation from abrasion if the pipe should move.

Railing Clamps

Clamp onto metal tubes such as pipe, scaffolding, and railing to hang lighting fixtures, threaded rod, and equipment.

Beaded Cable Ties and Mounts

Beaded Cable Tie Mounts

Mount to a surface and add a beaded cable tie to secure a bundle.

Beaded Cable Ties

Use in light duty applications such as tagging and attaching documentation to equipment.

Multiple-Bundle Beaded Cable Ties

Secure and separate two bundles with the same tie.

Mountable Hook and Loop Cable Ties

Adhesive-Back Hook and Loop Cable Ties

Stick these ties to any smooth, clean surface.

Screw-In Mount Hook and Loop Cable Ties

Attach with a screw or other fastener.

Carabiner-Mount Hook and Loop Cable Ties

Quickly attach and detach a bundle.

DIN-Rail-Mount Hook and Loop Cable Ties

Route and organize wire, cable, and hose along your DIN rail. Unlike zip ties, these cable ties can be temporarily undone to add or remove material.

Hook and Loop Mount Cable Ties

Feed a bundle through the closed loop and wrap the ends around pipe or conduit for support.

Hook and Loop Cable Ties

Flame-Retardant Hook and Loop Cable Ties

These ties meet UL flammability requirements.

Hook and Loop Cable Ties with Buckle

The buckle allows you to cinch these ties tight.

High-Temperature Hook and
Loop Cable Ties with Buckle

Ties are made from heat-resistant aramid fabric to withstand temperatures up to 350° F.

ID Tag Hook and Loop Cable Ties

Take the guesswork out of identifying material—use the attached tag to label the bundle.

Cut-to-Length Hook and Loop Cable Ties with Buckles

Create a cable tie with a buckle—no sewing required.

Very Flexible Hook and Loop Cable Ties

Flexible enough for small bundles, these ties are often used for electronics.

Cut-to-Length Hook and Loop Cable Ties

Create custom-length ties from a roll with hook on one side and loop on the other.

Weather-Resistant Hook and
Loop Cable Ties with Buckle

Bundle cables outdoors with these ties that withstand exposure to UV rays and water.

ID Tag Hook and Loop Cable Ties with Buckle

Take the guesswork out of identifying material—use the attached tag to label the bundle.

Hook and Loop Cable Ties

These ties are flexible, reusable, and adjustable for delicate bundles or bundles that frequently change in size.

Elastic Hook and Loop Cable Ties with Buckle

These ties stretch to hold material tightly without slipping.

Easy-to-Grab Hook and Loop Cable Ties with Buckle

These cable ties are easy to yank apart or cinch shut, even when wearing gloves—a textured tab on the end gives you a good grip.

Strong-Grip Hook and Loop Cable Ties with Buckle

The hook and loop on these ties holds more tightly than other hook and loop.

Very Flexible Cut-to-Length Hook and Loop Cable Ties

Able to fit small bundles, these thin ties are more flexible than other ties.

Stainless Steel Hook and Loop Cable Ties

Woven from flexible stainless steel yarn and Nomex, these ties handle temperatures up to 850° F.

Hook and Loop Cable Tie Assortments

Keep a set of these differently sized cable ties on hand to use when you need them. They're flexible, reusable, adjustable.

Hook and Loop Cable Ties with Buckle Assortments

The buckle allows you to cinch these ties tight.

Hook and Loop Cable Ties with Handle

Easily transport or hang cords, rope, and hose—these hook and loop cable ties include a handle.

Cable Ties

Long-Lasting Cable Ties

These ties are less likely to crack and break from dryness than regular cable ties.

Self-Snipping Cable Ties

Use the built-in blade to remove excess length once these ties are secure.

No-Snag Cable Ties

The rounded, low-profile head keeps these ties from snagging and allows them to fit in tight spaces.

Metal-Detectable Cable Ties

Use these plastic cable ties when detection and retrieval are essential, such as in food processing applications. Ties are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.

Easy-Removal Cable Ties

Pull the tab to tear off these cable ties.

Temporary-Hold Cable Ties

The tail slots into the head to create a temporary loop to hold wires. Hook and unhook the loop to add additional wires before permanently cinching the tie.

Chemical-Resistant Cable Ties

For use in environments subjected to chemicals, these ties withstand the most corrosive conditions.

No-Gap Curved-Head Cable Ties

The head of these cable ties is contoured to fit against pipe, tubing, and other round material for a tight fit.

No-Gap Fine-Adjustment Cable Ties

These cable ties have a finely ribbed body and a metal-toothed head that allows them to adjust to the exact size of the material without slipping.

Multiple-Bundle Cable Ties

Secure and separate parallel bundles with the same tie.

Reusable Cable Ties

Whether you plan to change the bundle size or need a temporary hold, these ties have a release tab for removal and reuse.

High-Strength Cable Ties

These strong, wide ties are often used as an alternative to metal strapping.

Cable Ties

Bundle and secure cable, wire, and hose.

Fixed-Loop Cable Ties

Often used as tamper seals and in tagging applications, these ties create a consistent loop size every time.

Cable Ties with Material Certification

These cable ties come with a material certificate with traceable lot number and product shelf life.

No-Gap Flexible-Body Cable Ties

With a thin, flexible body, these cable ties fit tightly around irregularly shaped bundles.

Static-Dissipative Cable Ties

Protect sensitive electronic equipment from static buildup.

Padded Cable Ties

A foam padded back combined with an extra-wide body protects sensitive bundles, such as fiber optic cable.

Flame-Retardant Cable Ties

These ties meet UL flammability requirements.

ID Tag Cable Ties

Take the guesswork out of identifying material—use the attached tag to label the bundle.

Choose-a-Color Cable Ties

Identify bundles at a glance.

High-Strength Cut-to-Length Cable Ties

Create custom-length cable ties for large bundles and heavy materials.

Cut-to-Length Perforated Cable Ties

Thread the end through one of the perforations to secure.

Elastic Cable Ties

Extra-Wide Elastic Cable Ties

These ties are wide and flat for a no-slip grip.

Elastic Cable Ties

These stretchy ties conform to irregularly shaped bundles to grip material tightly.

Elastic Beaded Cable Ties

The evenly spaced ball-shaped beads allow you to adapt to changes in bundle size.

Metal Cable Ties and Mounts

Stainless Steel Cable Ties

For use in the harshest environments, these ties withstand chemicals and UV rays.

Choose-a-Color Plastic-Coated
Stainless Steel Cable Ties

Identify bundles at a glance with these ties that are coated for an additional level of corrosion resistance.

Expandable Stainless Steel Cable Ties

The ripple in the body prevents over tightening and allows for expansion to protect material that frequently changes size, such as heat cable.

Plastic-Coated Stainless Steel Cable Ties

The plastic coating on these ties adds an additional level of corrosion and abrasion resistance over other stainless steel cable ties.

Aluminum Cable Ties

Stamp or emboss these ties to identify material.

Mountable Cable Ties

Attach these cable ties directly to a surface—no separate mount needed.

Fine-Adjustment Mountable Cable Ties

Reduce gaps between the cable tie and bundle—these ties have a smooth body that allows them to adjust to the exact size of the material.

Cable Tie Assortments

Keep an assortment of cable ties on hand.

Padded Cable Tie Assortments

A foam padded back combined with an extra-wide body protects sensitive bundles, such as fiber optic cable.

Choose-a-Color Cable Tie Assortments

Identify bundles at a glance.

Long-Lasting Cable Tie Assortments

These ties are less likely to crack and break from dryness than regular cable ties.

Cord Grips

Sure-Grip Aluminum Cord Grips

The mesh extension provides a secure hold in applications where cable is pulled or in motion. It reduces stress on the cable and prevents kinking for longer cable life.

Aluminum Cord Grips

These cord grips are lightweight yet durable.

90° Elbow Aluminum Cord Grips

These cord grips are lightweight yet durable.

45° Elbow Aluminum Cord Grips

Secure and seal electrical cords entering knockouts at a 45° angle.

Continuous-Flex Snap-In Plastic Cord Grips

Built with snap-in tabs and a spring extension, these cord grips install into panel holes more quickly than standard grips and better prevent damage from sharp bends.

Snap-In Plastic Cord Grips

These grips install into enclosure holes quickly to stabilize and relieve strain on cords.

90° Elbow Plastic Cord Grips

Made of nylon, these grips resist chemicals.

Plastic Cord Grips

Made of nylon, these grips resist chemicals.

Steel and Iron Cord Grips

Stronger than aluminum cord grips, these grips are zinc plated for corrosion resistance.

90° Elbow Steel Cord Grips

Stronger than aluminum cord grips, these grips are zinc plated for corrosion resistance.

Stainless Steel Cord Grips

Able to stand up to rust better than steel grips, these 300 series stainless steel grips secure electrical cables in corrosive environments.

Screw-Down Cord Grips for Building Cable

Tighten the screws to secure your cable.

Locking Snap-In Cord Grips for Building Cable

An insert clamps the cable in place to provide more strain relief than other snap-in cord grips for building cable.

Snap-In Cord Grips for Building Cable

Cord Grips for Flat Cable

Connect a single flat cable to a junction box.

Plastic Submersible Cord Grips

Continuous-Flex Plastic Submersible Cord Grips

Continuous-Flex High-Temperature
Plastic Submersible Cord Grips

Extend your cord’s life while stopping it from coming loose in places that are sanitized with water or steam as hot as 300° F, such as food plants and clean rooms.

90° Elbow Continuous-Flex
Plastic Submersible Cord Grips

Compact Plastic Submersible Cord Grips

These grips are sized to fit in tight areas.

Continuous-Flex Snap-In
Plastic Submersible Cord Grips

Push to install these cord grips in wet environments and high-movement applications such as robotics and handheld equipment.

Snap-In Plastic Submersible Cord Grips

Snap these cord grips into place to secure cable in wet environments.

90° Elbow Plastic Submersible Cord Grips

Plastic Submersible Cord Grips

High-Temperature Plastic Submersible Cord Grips

Able to withstand temperatures up to 300° F, these grips are also corrosion- and chemical-resistant.

Absorption-Resistant Plastic Submersible Cord Grips

Because these grips resist absorbing water, they are less likely to crack or corrode than other types of plastics and metals.

Wraparound Plastic Submersible Cord Grips

Wrap the split gland of these grips around ethernet cables with an RJ45 connector or other already installed cables for a water-resistant seal with your enclosure.

Plastic Submersible Cord Grips for Building Cable

A rubber bushing with an oval slot resists water and provides entry for building cable, which is also known as Romex type NM-B or type UF-B cable.

Flared Plastic Submersible Cord Grips

Secure cords installed through enclosures and panels in wet environments while protecting them against sharp bends. With a flared end that keeps cords from bending without limiting too much motion, these grips extend cord life.

Vented Plastic Submersible Cord Grips

Vent air from your enclosure to equalize pressure and stop condensation from forming inside while securing cords in wet environments. These polyamide grips are lightweight and resist rusting.

90° Elbow Absorption-Resistant
Plastic Submersible Cord Grips

These 90° elbows absorb less water and are less likely to crack or corrode than other types of plastics and metals.

Sure-Grip Plastic Submersible Cord Grips

90° Elbow Sure-Grip Plastic Submersible Cord Grips

These grips are made of nylon, which resists most chemicals. The nylon mesh extension provides a secure hold when the cable is pulled or in motion.

Sure-Grip Plastic Submersible Cord Grips

Made of nylon with a nylon mesh extension, these grips resist most chemicals. The mesh provides a secure hold in applications where cable is pulled or in motion.

Sure-Grip Absorption-Resistant
Plastic Submersible Cord Grips

Made of PBT, these grips resist soaking up water in washdown and other wet environments while securing cords with an extra-strong hold.

90° Elbow Sure-Grip Absorption-Resistant
Plastic Submersible Cord Grips

Secure cords in washdown areas where there’s minimal space—these cord grips curve 90° to relieve stress from bending.

Screw-Down Sure-Grip Plastic Submersible Cord Grips

Tighten the screw-down clamp for superior pull-out resistance.

Aluminum Submersible Cord Grips

45° Elbow Sure-Grip Aluminum Submersible Cord Grips

Keep your cord at a gentle angle without sacrificing a tight hold, even in tough, wet environments.

Aluminum Submersible Cord Grips for Building Cable

With an oval bushing hole, these lightweight grips secure flat building cable, such as Romex and Festoon cable, in wet areas. All offer strain relief to extend cable life.

90° Elbow Sure-Grip Aluminum Submersible Cord Grips

Create a tight grip on cords in wet environments while reducing stress from bending—the 90° angle of these cord grips routes cords to fit tight spaces in enclosures and panels.

45° Elbow Aluminum Submersible Cord Grips

Use these lightweight grips to secure cords entering knockouts at a 45° angle in wet, tight spaces while easing the stress from bending. Made of aluminum, they’re lighter in weight than steel and brass grips yet durable.

Aluminum Submersible Cord Grips

Lighter in weight than steel and brass grips, these aluminum grips are strong enough to secure cords in demanding wet environments.

90° Elbow Aluminum Submersible Cord Grips

Stop cords from coming loose in wet environments while keeping them along the side of your enclosure in tight spaces.

Stainless Steel Submersible Cord Grips

These grips are the most corrosion resistant of any of our submersible metal cord grips.

Brass Submersible Cord Grips

Low-Temperature Brass Submersible Cord Grips

Keep cords from coming loose and seal water out of enclosures in extremely cold labs and storage areas. Thanks to their plastic bushing and rubber O-ring, these grips withstand temperatures as low as -75° F.

Brass Submersible Cord Grips

Suitable for use in applications where cords are underwater—these grips are rated IP68 for protection from prolonged submersion.

Continuous-Flex Brass Submersible Cord Grips

These grips have an extension that provides extra support for moving cable and prevents kinking for longer cable life.

Vented Brass Submersible Cord Grips

Secure cable installed through enclosures in wet environments while venting air to protect electronics from condensation.

Submersible Cord Grips for Shielded Cable

An internal ring keeps cable with braid shielding grounded to the body of the grip to block electromagnetic interference (EMI).

Hazardous Location Cord Grips

90° Elbow Sure-Grip Hazardous Location Cord Grips

These 90° elbows meet Class III, Divisions 1 and 2 standards for use in hazardous locations.

Sure-Grip Hazardous Location Cord Grips

These grips meet Class III, Divisions 1 and 2 standards for use in hazardous locations.

Sanitary Washdown Cord Grips

Securely connect cable in sanitary environments such as food plants with these watertight cord grips.

Wet-Location Cord Grips

Stainless Steel Multi-Diameter Wet-Location Cord Grips

Stainless steel construction offers the most corrosion-resistance of any of our multi-diameter wet-location cord grips.

Plastic Wet-Location Cord Grips

Made of nylon, these grips resist chemicals. Install them in panels and enclosures—they have a zinc-plated steel locknut and metal-reinforced rubber O-ring that prevents liquid from entering the enclosure.

Aluminum Wet-Location Cord Grips

These cord grips are lightweight yet durable. They have a zinc-plated steel locknut and metal-reinforced rubber O-ring that prevents liquid from entering the connection.

Heat-Shrink-Sealed Plastic Wet-Location Cord Grips

Also known as cable-entry seals, the cable-entry side has heat-shrinkable polyolefin with an adhesive lining.

90° Elbow Steel Wet-Location Cord Grips

Stronger than aluminum cord grips, these steel grips are zinc plated for corrosion resistance. They have a steel locknut and metal-reinforced O-ring that prevents liquid from entering the connection.

45° Elbow Aluminum Wet-Location Cord Grips

Secure cords in wet and industrial environments with little room—these grips curve 45° to relieve bending stress.

90° Elbow Plastic Wet-Location Cord Grips

Sure-Grip Stainless Steel Wet-Location Cord Grips

The mesh offers a secure hold in applications where cable is pulled or in motion. It reduces stress on the cable and prevents kinking for longer cable life.

Stainless Steel Wet-Location Cord Grips

These stainless steel grips offer the most protection from wet, corrosive environments of any of our metal wet-location cord grips. They are rated IP67 for protection from temporary water submersion.

90° Elbow Aluminum Wet-Location Cord Grips

These cord grips are lightweight yet durable. They have a zinc-plated steel locknut and metal-reinforced rubber O-ring that prevents liquid from entering the connection.

Brass Multi-Diameter Wet-Location Cord Grips

These grips are nickel-plated brass for good corrosion resistance.

Steel and Iron Wet-Location Cord Grips

Stronger than aluminum cord grips, these grips are zinc plated for corrosion resistance. They have a steel locknut and metal-reinforced O-ring that prevents liquid from entering the connection.

Multi-Cord Grips

Submersible Break-Through Multi-Cord Grips

These grips have a thin, flexible seal that covers the holes until you push cords through.

Low-Profile Submersible
Break-Through Multi-Cord Grips

The face of these grips is flush with the cable-entry point for a seamless appearance.

Multi-Cord Grips for Building Cable

Secure multiple flat cable through one cord grip—reducing the space and number you need for a project, as well as saving time.

Wraparound Multi-Cord Grips

Attach a cord grip to cable without removing connectors and rewiring. These cord grips have a two-piece design to fit around cables with connectors.

Low-Profile Wet-Location
Break-Through Multi-Cord Grips

The face of these grips is flush with the cable-entry point for a seamless appearance. They have a thin, flexible seal that covers the holes until you push a cord through.

Round Liquid-Tight Multi-Diameter Multi-Cord Grips

Modify these cord grips to get the right fit for your cord even when you don't know the exact diameter.

Wet-Location Multi-Cord Grips

Grips have a rubber inner grommet with multiple holes and a rubber O-ring that create a tight seal to prevent liquid from entering the connection.

Wet-Location Multi-Diameter Multi-Cord Grips

Peel away layers of rubber inserts to fit around cord grips, even when you don't know the exact diameter.

Food Industry Wraparound Multi-Cord Grips

FDA compliant for direct food contact, these cord grips have a multi-piece design to wrap around cables in sanitary environments without removing connectors or rewiring.

Heat-Shrink-Sealed Wet-Location Multi-Cord Grips

The cable-entry side has heat-shrinkable polyolefin with an adhesive lining. These are also known as cable-entry seals.

Cable Support Grips

Single-Loop Cable Support Grips

These grips are galvanized steel for good corrosion resistance.

Corrosion-Resistant Single-Loop Cable Support Grips

Made of stainless steel, these grips have excellent corrosion resistance.

Double-Loop Cable Support Grips

These are tin-plated bronze.

Corrosion-Resistant Double-Loop Cable Support Grips

Made of stainless steel, these grips have excellent corrosion resistance.

Mid-Cable Support Grips

These are tin-plated bronze.

Corrosion-Resistant Mid-Cable Support Grips

Made of stainless steel, these grips have excellent corrosion resistance.

Self-Tightening Cable Support Grips

The loops tighten by the weight of your cable or by manual adjustment. These grips are often wrapped around a beam or pipe.

Cable and Hose Trays

Zinc-Plated Steel Formable Cable and Hose Trays

The zinc plating on these tray systems offers good corrosion resistance.

Corrosion-Resistant Stainless Steel
Formable Cable and Hose Trays

These are the most corrosion-resistant tray systems we offer.

Steel Formable Cable and Hose Trays

Cut, bend, and connect these wire mesh tray systems to route cable and hose in configurations such as curves, slopes, and tees.

Cable and Hose Trays

Create a system to route cable and hose by connecting components such as straight trays and tees.

Cable and Hose Carriers

Lay-In Snap-Together Open Cable and Hose Carriers

The hinged snap-on crossbars open for access at any point along the carrier's length so you can lay in the cable and hose, rather than threading it through.

Feed-Through Snap-Together
Open Cable and Hose Carriers

Thread cable and hose through the entire length.

Heavy Duty Open Cable and Hose Carriers

A more durable construction with a zinc-plated steel frame provides strength for a longer service life than other open cable and hose carriers.

Low-Vibration Snap-Together
Open Cable and Hose Carriers

Designed for smooth, quiet travel, these carriers minimize clicking and jumping in vibration-sensitive applications such as printing and scanning.

Robot-Ready Cable and Hose Carrier Kits

Designed for specific robot models, these kits have all of the parts required to create a cable and hose carrier. Use them to organize and protect cable and hose without obstructing your robot’s movement.

Snap-Together Enclosed Cable and Hose Carriers

By completely surrounding the cable and hose, these carriers protect them from dirt, chips, and debris.

Any-Which-Way Enclosed Cable and Hose Carriers

Bending and twisting up to 380° in any direction, these carriers organize and protect cable and hose around machines that are constantly moving, such as robotic arms and conveyors.

Accessories for Any-Which-Way
Cable and Hose Carriers

Use these accessories to mount carriers to your machinery without creating an obstruction.

Cord Bushings

More rigid than grommets, these bushings guard cords from rubbing against the edges of holes in enclosures and panels and wearing down.

Continuous-Flex Cord Bushings

A spring extension prevents sharp bends and kinks in your cord, prolonging its life. These bushings, which are more rigid than grommets, shield cords from rubbing against the edges of holes in enclosures and panels, so they won’t wear down.

Electrical Wiring and Connecting

Strain Relief Hardware for Drop-Down Cable

Reduce cable strain caused by equipment hanging from drop-down cable.

Data Connector Strain Relief Boots

Protect RJ45 connectors on Ethernet cables from strain when cables are pulled and bumped.

Shaft Grommets

Support shafts, bearings, and other moving parts that are routed through a hole. These grommets are slippery to allow parts to move freely in the hole. Install them on thin sheet-metal panels.

Sealing Grommets

Shrink-to-Fit Sealing Grommets

Apply heat and these grommets shrink around wire, cable, and cords to keep out dust, debris, and moisture.

Liquid-Tight Sealing Grommets

Rated IP68, these grommets form liquid-tight seals around wire, cable, and cords to protect them against dust as well as submersion in a maximum of one meter of water.

Sealing Grommets

Create a tight seal around wire, cable, and cords with these grommets to keep out dust, debris, and moisture.

Split Sealing Grommets

The two‐piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

Sanitary Sealing Grommets

Create a sanitary seal on through-wall piping, tubing, and cables in food-, cosmetic-, and pharmaceutical-processing areas.

Wet-Location Snap-In Sealing Grommets

Snap these grommets into place to hold wire, cable, and cords in wet locations and form a seal against dust, debris, and water.

Create-Your-Own Split Sealing Grommets

Cut the center of these grommets with a utility knife to create custom IDs. The two‐piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

Fabric Grommets

Snap-In Fabric Grommets

No setting tools needed—snap the two parts together in a hole you've already cut to strengthen the hole and eliminate fraying. Use these grommets in tarps, covers, curtains, and other material.

Rolled-Rim Reinforcing Fabric Grommets

A rolled rim provides added grip while the elongated neck and teeth on the washer, also known as a spur washer, add reinforcement and reduce rotation so you can use these grommets in thick materials such as canvas. Press the grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Self-Piercing Fabric Grommets

The sharp neck on these grommets cuts the material as you press them into place, eliminating the need for a cutting punch. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Fabric Grommets

Press these grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Fabric Grommet Kits

Kits include grommets, a cutting punch, a cutting block, an installation punch, and a die set. Use them to create a way to run rope and cable through tarps, covers, and curtains.

Reinforcing Fabric Grommets

The extended neck on the washer of these grommets adds reinforcement so you can use them in thicker material such as woven fabrics. Press them into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Pipe and Tubing Grommets

Snap-In Pipe and Tubing Grommets

These grommets have two flanges that snap around holes and flex to compensate for misalignment and movement of pipe and tubing. They're often used for routing applications in panel walls.

Push-In Pipe and Tubing Grommets

Press these flexible grommets into holes and their tapered inner wall will expand when pipe or tubing is inserted to hold them snugly in place. They're often used for routing applications on metal, plastic, and fiberglass tanks.

Grommets

Push these flexible grommets into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Expandable Locking Grommets

The center hole has flaps that flex to hold and protect various sizes of wire, cable, and cords while keeping out dust and debris. Snap these grommets into place and their wings expand against the sides of the hole to lock them in position. Use them to turn rough-edged and uneven holes into smooth holes.

Cut-to-Size Grommets

Cut the thin layer of rubber in the center of these grommets to create custom IDs to securely hold and protect wire, cable, and cords. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration. Also known as webbed grommets.

Locking Grommets

These grommets snap into place and have wings that expand against the sides of the hole to lock them in position. Use them to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth holes.

Grommet Assortments

Keep grommets of various sizes on hand to solve whatever problems arise.

High-Temperature Grommets

These flexible grommets withstand temperatures of 450° F or greater, which is approximately twice as high as our standard grommets. Push them into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Expandable Grommets

The center hole has flaps that flex to hold and protect various sizes of wire, cable, and cords while keeping out dust and debris. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes.

Split Grommets

A slit in the side of these grommets allows you to install them around wire, cable, and cords that are already in place. They snap into the hole and their wings hold them tight. Use them to turn rough-edged and uneven holes into smooth, insulated holes.

Furniture Grommets

Eliminate clutter on desktops, countertops, benchtops, and other work surfaces by organizing wire, cable, and cords.

Brush-Style Furniture Grommets

Wire, cable, and cords pass through the grommet opening while the bristles fill in the gaps to control dust and debris. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Expandable Furniture Grommets

The center hole has flaps that flex to accommodate various sizes of wire, cable, and cords while still providing dust and debris protection. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Flexible Furniture Grommets

Squeeze these flexible grommets to open the center flap—once wire, cable, and cords pass through, the flap closes tightly for dust and debris protection as well as a finished look. Use them to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Strut Channel Brackets for Quick-Connect Clamps

These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.

Vibration-Damping Grommets

Press these grommets into a hole to add cushion on both sides.

Extreme-Temperature Vibration-Damping Grommets

In addition to having a wider temperature range than our other vibration-damping grommets, these have excellent weather resistance.

Extreme-Temperature Ribbed
Vibration-Damping Grommets

In addition to having a wider temperature range than our other ribbed vibration-damping grommets, these have excellent weather resistance.

Ribbed Vibration-Damping Grommets

Ribbed grommets are more flexible than our smooth vibration-damping grommets, so they're easier to install.

Clip-On EMI/RFI Suppressors for Cable

Clip these suppressors—also known as ferrite beads and ferrite chokes—around data, USB, video, and sensitive-equipment cable to curb electromagnetic and radio frequency interference.

Loop Clamps

Vibration-Damping Loop Clamps

Multiline Vibration-Damping Loop Clamps

Snug-Fit Vibration-Damping Loop Clamps

Plastic Loop Clamps

Loop Clamps

Multiline Loop Clamps

Plastic Routing Clamps

Multiline Plastic Routing Clamps

Plastic Routing Clamps

Snap-In Plastic Routing Clamps

Chemical-Resistant Plastic Routing Clamps

Two-Line Chemical-Resistant Plastic Routing Clamps

Connectable Plastic Routing Clamps

Adhesive-Back Plastic Routing Clamps

Plastic Expansion Routing Clamps

Lock-Close Strut-Mount Plastic Routing Clamps

Vibration-Damping Routing Clamps

Strut-Mount Vibration-Damping Routing Clamps

Weld-Mount Vibration-Damping Routing Clamps

Two-Line Weld-MountVibration-Damping Routing Clamps

Two-Line Rail-MountVibration-Damping Routing Clamps

Rail-Mount Vibration-Damping Routing Clamps

Vibration-Damping Routing Clamps

Magnetic Vibration-Damping Routing Clamps

Rails for Rail-Mount Vibration-Damping Routing Clamps

Routing Clamps

Routing Clamps

Two-Line Routing Clamps

Strut-Mount Metal Routing Clamps

Narrow-Space Strut-Mount Metal Routing Clamps

Standoff Strut-Mount Metal Routing Clamps

Strut-Mount Metal Routing Clamps for Insulated Pipe

Low-Profile Strut-Mount Metal Routing Clamps

Cut-to-Length Routing Clamps

Cut-to-Length Routing Clamps

Adjustable Standoff Clamps

Adjustable Standoff Clamps

Routing Rings and Hooks

Routing J-Hooks

Multiline Routing J-Hooks

Routing Rings

Nonconductive Routing Rings

Wire-Mount Routing Rings

Removable Routing Ringbolts

Routing S-Hooks

Magnetic Routing Ring Bases

Routing Ringbolts

Hangers for Pipe, Tube, and Conduit

Push-to-Lock Plastic Clamping Hangers

Plastic Clamping Hangers

Quick-Mount Plastic Clamping Hangers

Vibration-DampingThreaded-Rod-Mount Clamping Hangers

Stackable Vibration-DampingThreaded-Rod-Mount Clamping Hangers

Washdown Vibration-DampingThreaded-Rod-Mount Clamping Hangers

Snug-Hold Threaded-Rod-Mount Clamping Hangers

Stackable Threaded-Rod-Mount Clamping Hangers

Threaded-Rod-Mount Clamping Hangers

Adjustable Clamping Hangers

Threaded-Rod-Mount Multiline Hangers

Stainless Steel Threaded-Rod-Mount Loop Hangers

Pivoting Threaded-Rod-Mount Loop Hangers

Side-Load Threaded-Rod-Mount Loop Hangers

Pipe Cradles for Loop Hangers

Swivel Threaded-Rod-Mount Loop Hangers

Threaded-Rod-Mount Roller Loop Hangers

Strap Hangers

Strap-Mount Clamping Hangers

Suspension Beams for Threaded Rod

Weld-Mount Clamping Hangers

Hook-Mount Hangers

Clamping Hangers

Tie Wire Hangers

Tie Wire Hangers

Beam Clamps

Easy-Position Beam Clampsfor Pipe, Tube, and Conduit

Beam Clamps for Pipe, Tube, and Conduit

Beam Clamps with Tie Wire Hanger

U-Bolts

Vibration-Damping U-Bolts

Two-Line Weld-Mount
Vibration-Damping Routing Clamps

Two-Line Rail-Mount
Vibration-Damping Routing Clamps

Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Stackable Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Washdown Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Easy-Position Beam Clamps
for Pipe, Tube, and Conduit

High-Temperature Hook and
Loop Cable Ties with Buckle

Weather-Resistant Hook and
Loop Cable Ties with Buckle