Filter by
Diameter
System of Measurement
Appearance
Tolerance Rating
Hardness Rating
Specifications Met
Fabrication
Export Control Classification Number (ECCN)
REACH
RoHS
Maximum Temperature
Yield Strength
Mechanical Finish
Hardness
Minimum Temperature
Heat Treatable
Melting Point Temperature
Modulus of Elasticity
Temper Designation
Thermal Conductivity @ Temperature
Hardened Undersized High-Speed M2 Tool Steel Rods
- Yield Strength: See table
- Hardness: Rockwell C60 (Very Hard)
These rods, also known as drill blanks, have an undersized diameter for machining your own drill bits. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Drill Bit Size | Lg. | Yield Strength  | Mechanical Finish | Straightness Tolerance | Each | |
| 2.5mm | -0.0050mm to 0.0000mm | 2.5 mm | 2 3/8" | Not Rated | Precision Ground | 0.012" per ft. | 00000000 | 00000 |
Ultra-Formable 260 Brass Rods
- Yield Strength:
Inch sizes: Not Rated
Metric sizes: 9,000 psi - Hardness: Not Rated
- Temper: H01 (1/4 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B134
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.
For technical drawings and 3-D models, click on a part number.
300 mm Lg. | ||||
|---|---|---|---|---|
| Dia., mm | Dia. Tolerance Range, mm | Pkg. Qty. | Pkg. | |
| 2.5 | -0.051 to 0.051 | 4 | 00000000 | 00000 |