About Heat-Shrink Tubing
More
About Conduit
More
Hardened Undersized High-Speed M2 Tool Steel Rods
- Yield Strength: See table
- Hardness: Rockwell C60 (Very Hard)
These rods, also known as drill blanks, have an undersized diameter for machining your own drill bits. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
Hardened Oversized High-Speed M2 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
Also known as reamer blanks, these rods have an oversized diameter that allows for finishing to your exact requirements. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Ball-with-Shank-End Roller Swage Wire Rope End Fittings—Not for Lifting
Also known as socket-end swage fittings, install these end fittings with a roller swage press for a strong, permanent hold. They have a thicker shank wall than compression-grip end fittings. Made of 18-8 stainless steel, these fittings have excellent corrosion resistance to chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
Fittings | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire Rope | Ball | Dies | ||||||||||
| Dia. | Construction | Lg. | Shank Dia. | Lg. | Dia. | Capacity, lbs. | Specifications Met | Each | Pkg. Qty. | Pkg. | ||
18-8 Stainless Steel  | ||||||||||||
| 1/4" | 1 × 7 Strand Core 1 × 19 Strand Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core 18 × 7 IWRC 19 × 7 Strand Core | 1" | 7/16" | 3/8" | 11/16" | 1,400 | MS20664 | 0000000 | 000000 | 2 | 0000000 | 000000000 |
Thermocouple Insulating Sleeves
Protect thermocouple wire exposed to air in forging, die casting, heat treating, and other extreme-temperature applications. Use multiple sleeves to insulate longer wire. No sealant or epoxy is needed for joining them.
For technical drawings and 3-D models, click on a part number.
| For Wire Gauge | ID | Lg. | Shape | Max. Temperature, °F | Material | Pkg. | |
2 Bores | |||||||
|---|---|---|---|---|---|---|---|
| 14 | 0.080" | 1" | Round | 2250° | Cordierite | 0000000 | 00000 |
| 14 | 0.080" | 1" | Oval | 2250° | Cordierite | 0000000 | 0000 |
| 11 | 0.110" | 1" | Oval | 2250° | Cordierite | 0000000 | 0000 |
| 8 | 0.171" | 1" | Round | 2250° | Cordierite | 0000000 | 0000 |
| 8 | 0.171" | 1" | Oval | 2250° | Cordierite | 0000000 | 0000 |
| Each | |||||||
4 Bores | |||||||
| 24 | 0.040" | 12" | Round | 3400° | Alumina | 0000000 | 00000 |
| 24 | 0.040" | 18" | Round | 3400° | Alumina | 0000000 | 00000 |
Adapters for Medium-Wall (IMC) and Thick-Wall (Rigid) Steel Conduit
Attach medium-wall (IMC) and thick-wall (rigid) steel conduit to a knockout in an outlet box or enclosure.
NPSM male × flanged end male straight adapters are also known as conduit nipples, chase nipples, and box adapters. The flange installs through a knockout from inside an outlet box or enclosure. Use with a locknut (not included) to create a short raceway between boxes or enclosures.
Conduit Connection | Electrical Box Connection | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Conduit Trade Size | Pipe Size | Thread Type | Gender | For Knockout Trade Size | Gender | Lg. | Material | Specifications Met | Each | |
| 2 | 2 | NPSM | Male | 2 | Male | 1" | Zinc | UL Listed, C-UL Listed, CSA Certified | 0000000 | 00000 |
Harsh Environment Heat-Shrink Tubing Assortments
Maintain a supply of tubing in a variety of sizes and materials that withstands harsh conditions such as abrasion, moisture, and chemicals.
PVC tubing has excellent resistance to chemicals, oil, and acids.
Polyolefin is for general purpose use. Polyolefin with adhesive creates a water-resistant seal; the adhesive melts when heated and bonds to the underlying surface.
PTFE has excellent abrasion resistance and withstands higher temperatures than other tubing.
FEP tubing is high strength to resist abrasion, cuts, tears, and chemicals.
PVDF resists abrasion, cuts, and tears.
| Includes | Number of Pieces | Lg. | Shrink Ratio | Shrink Temp., °F | Colors Included | Each | |
| 0.05"-1" ID Before Shrinking of Polyolefin (49 pieces, 10 sizes) 0.25"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (52 pieces, 5 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.08" ID Before Shrinking of PTFE (17 pieces, 5 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (22 pieces, 6 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 12 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes) | 181 | 1", 1/2ft. | 1.2:1, 1.5:1, 2:1, 2.5:1, 3:1 | 195° to 485° | Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow | 00000000 | 0000000 |