Use these accessories to protect your infrared thermometer transmitter and keep it working properly in hot or dirty environments.

Air purges flush out dust, moisture, and other contaminants on transmitter lenses that can interfere with infrared radiation focus and cause inaccurate readings. Connect them to a compressed air line to use.

Cooling jackets connect to a compressed air or water line to keep temperature transmitters from overheating. They’re recommended for use if operating in environments over 149° F.

Protective covers prevent dirt buildup and excessive exposure to light, which can cause transmitters to lose focus.

Insulating tubes prevent overheating by protecting thermometers against heat from mounting brackets or other surfaces.

For technical drawings and 3-D models, click on a part number.

Ensure the accuracy of noncontact temperature readings of dangerous and inaccessible surfaces with these thermometers that come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. Maximum working distance is the distance a one foot target can be reliably measured.

Thermometers with adjustable emissivity can be calibrated for more accurate readings of shiny surfaces than thermometers with fixed emissivity.

Warning: These infrared thermometers are not intended for medical use.

Keep these small thermometers in your pocket or toolkit to spot check the temperature of dangerous, hard-to-reach, and moving surfaces without touching them. Maximum working distance is the distance a one foot target can be reliably measured.

Thermometers with adjustable emissivity can be calibrated for more accurate readings of shiny surfaces than thermometers with fixed emissivity.

Thermometers with laser sight have a red beam of light to indicate the precise area being measured.

Thermometers with Bluetooth wirelessly send temperature results to an app downloaded to your smartphone. Use the app to adjust the emissivity.

Warning: These infrared thermometers are not intended for medical use.

Monitor the temperature of molten steel, furnaces, glass, and other hazardous surfaces without touching them. A built-in transmitter reads surface energy levels and converts them to analog and digital output values that can be read by a receiving device, such as a PLC. Because of this, you can use these transmitters for measuring and switching applications.

Adjust set points, emissivity range, and other settings on-site using the buttons on the transmitters. Connect transmitters to an IO-link controller (not included) to change settings remotely and alert you to errors on PLCs and human-machine interfaces.

Plug these transmitters into shielded M12 sockets since they're extremely prone to signal interference. These transmitters connect using two wires to send a 4-20mA current output and four wires to use the switching output and IO-link. Connect to pin 5 to utilize the test function to verify that the transmitter's signal processing is working correctly. To view transmitter wiring diagrams, select a part number and click Product Detail.

Their lenses resist scratches, which could cause transmitters to lose focus. All are IP-rated for protection against dust and low-pressure jets of water. Made of 303 stainless steel, these transmitters resist corrosion.

Transmitters can be used on all surfaces. For best results when measuring at an angle or working on round or uneven surfaces, use transmitters with laser sight.

Transmitters with a wavelength range of 0.78–1.06 microns are best for use with glass. Use transmitters with a wavelength range of 1–1.7 microns on metal, ceramics, and graphite. Transmitters with a wavelength range of 8–14 microns are useful for plastic, fabrics, food products, and other metal-free surfaces.

Add accessories to protect your infrared thermometer transmitter in hot or dirty environments. Air purges flush out dust, moisture, and other contaminants on transmitter lenses that can interfere with infrared radiation focus and cause inaccurate readings. Cooling jackets connect to a compressed air or water line to keep temperature transmitters from overheating. Protective covers prevent dirt buildup and excessive exposure to light, which can cause transmitters to lose focus. Insulating tubes prevent overheating by protecting thermometers against heat from mounting brackets or other surfaces.

For technical drawings and 3-D models, click on a part number.

To confirm the accuracy of noncontact temperature readings of dangerous and inaccessible surfaces, these thermometers come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. Maximum working distance is the distance a one foot target can be reliably measured.

Thermometers with adjustable emissivity can be calibrated for more accurate readings of shiny surfaces than thermometers with fixed emissivity.

Warning: These infrared thermometers are not intended for medical use. Use Non-Contact Forehead Thermometers for medical use.

These thermometers are rated for environments where hazardous material is present. They measure the temperature of surfaces without making contact and are often used to locate and diagnose problems in electrical, heating, and ventilation systems. Maximum working distance is the distance a one foot target can be reliably measured.

Thermometers with adjustable emissivity can be calibrated for more accurate readings of shiny surfaces than thermometers with fixed emissivity.

Hazardous location environmental ratings indicate whether manufacturers have included safety features in products to facilitate their safe use in a hazardous environment. Before selecting a product for a hazardous location, ensure it is rated for your environment. See About Hazardous Location Environmental Ratings.

Warning: These infrared thermometers are not intended for medical use. Use Non-Contact Forehead Thermometers for medical use.

Quickly take people’s temperatures as they enter your facility to screen out anyone with a high reading. These screeners have a thermal camera that uses infrared light to measure forehead temperature in two seconds at a distance of one to two feet. They’re accurate within 0.9° F and 0.5° C, and work even if people are wearing masks, hats, and glasses. If their temperature is normal, there’s an audible notification. Connect them to your network using Wi-Fi or their Ethernet port in order to create a library of photos, retain data for reporting, and customize the screeners to display directions and your company name and logo. For basic temperature scanning only, there’s no need to connect them to your network—simply plug their power cord into a wall outlet. If you want to keep people from entering until they pass the temperature check, wire these screeners to doors and gates. CE marked, they meet European safety, health, and environmental protection requirements.

Mount these screeners to a wall, or add a floor stand.

Warning: These screeners are not intended for medical use.

Build a scanner directly into your machine. These scanners are often used in kiosks for scanning standard barcodes and QR codes to identify items, track documents, and manage inventory. Solder on a wire or header to connect the scanner to your electronic device. For a direct connection to your computer, plug in a USB cable (not included).

As tough as the conditions you work in, these tablets withstand drops, grime, and heavy use. Impact- and scratch-resistant glass along with a reinforced housing, corners, and edges make these stronger than your typical tablet. A combination of their robust design and sealed ports means they’re sturdy enough to pass the highest military performance tests for temperature, shock, and vibration resistance. Because they’re sealed and their internal components have water-resistant coatings, these tablets are IP rated to protect against dirt, dust, and light rinses. From the extreme cold of freezers to the sweltering heat of foundries, they'll stay reliable and won't lag or crash in a wide range of temperatures.

Versatile companions to make your job easier, they’re great for anything from internet access and inventory management to inspection and data analysis. To enhance their helpfulness, download compatible apps from the Google Play store.

Samsung tablets connect to apps from the Samsung Knox suite for extra features, such as remote device monitoring and management, data analytics, and camera-based barcode scanning. This suite is optional and requires a paid subscription. They’re IP68 rated, so even if you drop them in water or use them in the rain, they’ll keep working. The touchscreen works with most gloves, but very thick gloves might not work. Choose those with a cellular data connection to access the internet outside of your facility. Just add your own SIM card. They’re compatible with all major cellular networks.

Zebra tablets have a built-in barcode scanner that reads 1D and 2D barcodes, so you can scan everything from UPC and Code 39 to QR codes. One thing to keep in mind, their touchscreen won’t work with gloves unless they’re designed for touchscreens. They’re UL listed, C-UL certified, and CE marked to meet U.S., Canadian, and European safety standards. These tablets require a charger and USB cord (both sold separately).

As tough as the conditions you work in, these tablets withstand drops, grime, and heavy use. Their scratch-resistant screen, reinforced housing, and rubberized edges make them more durable than your typical tablet. A robust design and sealed ports means they’re sturdy enough to pass the highest military performance tests for temperature, shock, and vibration resistance. Because they’re sealed and their internal components have water-resistant coatings, these tablets are IP rated. From the extreme cold of freezers to the sweltering heat of foundries, they'll stay reliable and won't lag or crash when exposed to a wide range of temperatures. They meet rigorous safety standards.

With an Intel Core i5 processor, they make quick work of everything from demanding real-time data analysis and multitasking to internet access. A built-in barcode scanner reads 1D and 2D barcodes, so you can scan UPC, Code 39, and QR codes. These tablets use a Windows IoT Enterprise system specifically for industrial devices. This makes them compatible with all standard Windows applications. They’re also more secure than consumer versions of Windows. These tablets support long-term security and maintenance updates to ensure that your system remains secure and stable over an extended lifetime.

They have a built-in stand to prop them up for hands-free reading, or you can attach the hand strap for comfort and a secure grip.

Keyboards (sold separately) turn your tablet into a laptop. These keyboards are specifically designed to pair with the rugged tablets. Fold them over the screen for storage and as added screen protection.

Mounting docks (sold separately) hold your tablet securely and attach to VESA brackets or positioning arms, so you can mount your tablets on forklifts, carts, and other vehicles. They have a variety of ports to charge your tablet. Use a vehicle power adapter (sold separately) to charge.

Identify and track items tagged with the most common barcodes. These scanners don’t require any software to communicate with your computer. When you press the trigger to scan a barcode, the data appears wherever your cursor is, just like when you type.

All scanners read 1D barcodes, such as UPC, EAN, Code 39, Code 128, and ISBN codes. Those that scan 2D barcodes read QR, Data Matrix, and PDF417 codes. Scanners for GTINs (Global Trade Item Numbers) read codes that are typically embedded in UPC and EAN barcodes.

CCD (charge-coupled device) scanners read barcodes on screens and other shiny surfaces better than laser scanners. They also have fewer moving parts than laser scanners, so they last longer. Image scanners read lower-quality barcodes than laser and CCD scanners. They’re also able to read barcodes on screens.

Scanners with a Bluetooth connection work wirelessly hundreds of feet away from the computer they’re sending data to.

Scanners that cannot be sold to the listed areas are restricted due to energy efficiency and/or export regulations.

These thermometers take touch-free readings in a single second with an infrared sensor. Unlike traditional thermometers, they don’t need to be disinfected between uses, so you can quickly take temperatures from multiple people without the risk of spreading illness. The digital LCD display is easy to read even in dim lighting. These thermometers glow green, orange, or red to indicate normal, elevated, or high body temperatures.

All are registered with the FDA for use as a medical device. They also meet ISO 13485 standards for medical device design and manufacturing.

These thermometers cannot be sold to Canada due to import regulations.