Install in a cutout to create a secure joint between boards, butcher blocks, and countertops.

Screws are beveled under the head for use in countersunk holes.

Drill holes with the point on these hangers.

These 316 stainless steel screws have excellent resistance to chemicals and salt water.

These steel screws are zinc plated to resist corrosion in wet environments.

These steel screws are zinc plated to resist corrosion in wet environments.

18-8 stainless steel screws have good chemical resistance.

18-8 stainless steel screws have good chemical resistance.

With a low-profile rounded head that’s flanged to sit flush for a finished appearance, these screws press threads into wood on cabinets, trim, molding, and light duty framing.

With more points of contact than Phillips-, slotted-, and square-drive screws, you can firmly press these Torx-drive screws into wood without stripping them or damaging the recess—their threads create a tight hold.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

Drive the pointed tip of these screws into soft material, such as wood and drywall. They are also known as lag bolts.

These Phillips head screws have a decorative rounded top that provides a finished appearance.

Brass screws are corrosion resistant in wet environments and electrically conductive.

Brass screws are corrosion resistant in wet environments and electrically conductive.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

Brass screws are corrosion resistant in wet environments and electrically conductive.

Because these steel screws cut threads into drilled holes as they’re turned, they require less driving torque and cause less stress on material than thread-forming screws. Also known as trim-head deck screws, they have a small flat head and slender shank to reduce the risk of splitting boards.

18-8 stainless steel screws have good chemical resistance.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

The neoprene-backed washer seals out contaminants.

A Torx drive has more points of contact than a Phillips drive, allowing you to apply extra force with less slippage or damage to the recess.

18-8 stainless steel screws have good chemical resistance.

Turn these studs with a hex key for ease of installation.

These metric 316 stainless steel studs have excellent resistance to chemicals and salt water. Also known as hanger bolts, use them to hang, mount, and fasten parts to wood structures.

Join soft and hard woods.

Join two pieces of wood with these dowel pins. When glued, they expand for a tight fit.

A closed end seals out elements and protects the threads on these inserts from debris.

Mount these inserts flush or below the material's surface.

Ridges on the barrel of these inserts make them less likely to split hardwood than inserts with prongs. They're often used in wood that has been cut across the growth rings.

Fewer prongs than other tee nut inserts reduce the risk of splitting hardwood—these inserts have three short prongs.

Hooked prongs give these inserts excellent holding power even when removing screws.

Six prongs around the barrel of these inserts provide a strong hold and prevent them from loosening and twisting.

Assortments include various sizes of tapping inserts for softwood.

Assortments include various sizes of tapping inserts for hardwood.

Large threads cut into softwood such as particleboard for a strong hold.

Also known as angle brackets.

Maple is heavy and wear resistant like oak but with a smoother surface.

Oak is a heavy wood with high wear resistance. Its surface is rougher than birch and maple.

Also known as MDF, these fiberboard sheets are smoother, denser, and more uniform than real wood.

Lighter in weight than any other wood, yet still strong, these balsa cores stiffen composite sandwiches without weighing them down.

Don’t knock the classics—these wood boards are a strong and affordable building material.