We will reply to your message within an hour.
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.
For quick repairs, these epoxies begin to harden in 6 minutes or less.
Assortments include eight different epoxies in 0.1-oz. packets to handle a variety of small jobs.
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.
For invisible bond lines, these adhesives dry clear.
Even when used under water, these adhesives maintain their strength.
With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.
Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.
These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes.
Bond most materials without the strong odor of other epoxy adhesives.
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.
No need to mix these acrylics—apply adhesive to one surface and activator to the other, then bring surfaces together to bond.
Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.
Also known as super glue, these adhesives bond quickly.
Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds.
Accommodate joint movement with these adhesives that remain pliable when cured.
Form bonds in 5 seconds or less.
Make strong, instant bonds on a variety of materials—but not your skin.
Form bonds without the strong odor of other instant-bond adhesives.
Use these adhesives in applications that are highly sensitive to contaminants.
Bond plastics, porous materials, or dirty surfaces.
These thick gels fill gaps up to 0.2" wide—the largest of any of our instant-bond adhesives.
For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives.
These thin liquids, also known as super glue, flow into small gaps.
For easy positioning, these adhesives begin to harden only when exposed to light.
Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.
Form bonds with twice the strength of our other spray adhesives.
These spray glues adhere quickly.
For easy positioning, this adhesive remains tacky for hours. Once items are in place, apply pressure to create a permanent bond.
Apply these adhesives on two surfaces, air dry, and then bring together to bond.
Bonds reach full strength in 10 minutes.
Bond porous materials with these low-odor, nonflammable adhesives.
Apply this glue like tape for a no-mess alternative to liquid adhesives, hot melts, and staples. Also known as adhesive transfer tape.
Use these glue rolls with 3M dispensing guns.
Also known as Gorilla Glue, this glue expands to form stronger bonds than other glue.
This general purpose glue tackles a variety of repairs.
Bond both soft and hard wood.
In addition to being waterproof, this glue is made of FDA listed materials.
This glue withstands limited exposure to water.
This glue withstands temperatures up to 500° F.
Pull off a small piece of putty and stick lightweight objects to a surface.
This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.
These small tabs of pressure-sensitive adhesive offer convenient, no-mess bonding.
Bond glass and stone to drywall, treated lumber, and subfloors.
Install building materials such as wood and drywall with these general purpose adhesives.
Use these adhesives to bond lumber and plywood.
Install vinyl and rubber treads on stairs with this adhesive.
Bond carpeting, vinyl tile, and other floor coverings to subfloors.
Install foam insulation, drywall, and paneling with these adhesives.
Adhere vinyl and rubber wall bases to wood, drywall, and concrete.
When heated, these glue sticks melt and quickly begin to harden. Use them to seal packaging and form other low- to medium-strength bonds.
The polyurethane glue in these cartridges has nearly twice the shear strength of other hot-melt adhesives.
Remaining flexible after curing, these glue sticks accommodate joint movement.
Improve instant-bond adhesive performance on hard-to-bond materials.
Made from silicone, these sealants are RTV (room-temperature vulcanizing).
These sealants include a material certificate with traceable lot number, test report, and product shelf life.
Resistant to mold and mildew, these sealants are well suited to high-humidity environments.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.
Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum.
Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics.
A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.
Apply these sealants in cold temperatures, on wet surfaces, and even through running water.
Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.
Thinner than non-sagging sealants, this sealant flows easily into cracks and has a smooth finish.
Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
Press this adhesive-backed plastic tape into place for an immediate light-duty seal.
Mix a small amount of water-based paint with this caulk to match the color of your surface.
Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.
These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.
The strongest submersible sealants we offer, these combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.
Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.
Prevent sound from passing through gaps and joints where walls, floors, and ceilings meet using these sealants to fill them.
Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.
Seal joints and gaps in concrete.
These sealants don't degrade in sunlight.
Press this pliable rope into place to hold glass in window frames and seal leaks.
Also known as glazing compounds, use these sealants to install glass in aluminum, steel, and wood framing.
Seal glass windows in metal and wood fire-rated doors.
Prepare joints and surfaces to ensure proper sealant adhesion.
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.
Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.
Everything you need to repair cracked, worn, and damaged surfaces—even underwater.
Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.
Fill and conceal small cracks, nail holes, and blemishes. Compounds are ready to use.
Spray these compounds onto ceilings to create a popcorn texture that covers stains, patches, and chips. The nozzle is upright for easy application.
These patching compounds are the most flexible and watertight we offer.
Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.
Reinforce hot- and cold-applied asphalt patching compounds and coatings with this flexible fabric.
Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.
Fill cracks with these coatings to stop leaks and deaden sound.
Roll out a fast fix for leaky roofs and gutters with these peel-and-stick rolls.
Press these putty-like fillers into cracks in wood up to 1/8" wide.
Fix damaged wood or build up and replace missing wood.
Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.
Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.
Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.
All the benefits of gasketing adhesive in a no-drip form.
Use cartridges with a standard caulk gun for quick and easy dispensing.
Create a seal to get your machine back up and running in just two hours. These gasket makers have a thick consistency that creates a seal right away, even before they harden.
The thick consistency of these gasket makers creates a seal right away even before they harden. Press the nozzle to dispense a uniform bead.
Dispense a uniform bead when you press the nozzle.
These gasket makers combine the ability to withstand temperatures up to 600° F with the flexibility to accommodate movement.
Create gaskets that can flex to accommodate movement and won’t degrade from oil.
These gasket makers combine oil resistance and the flexibility to accommodate movement.
Form dense, rigid gaskets that won’t degrade in the presence of oil.
With a standard caulk gun, quickly and easily make dense, rigid gaskets that won’t degrade from oil.
Remove oil- or solvent-based residue from metal, plastic, wood, carpet, upholstery, and painted surfaces.
Remove silicone, foam sealants, caulk, wet or dry latex-based foams, and construction adhesives.
Remove oil-based residue from hard surfaces, painted surfaces, vinyl, carpet, and fabric.
Spray these primers onto a mounting surface to quickly and smoothly apply signs, labels, and protective films.