Signal machine status with changing colors—green for running, yellow for standby, red for stopped—then switch to a bright white light to illuminate maintenance or tool changes. Using your programmable logic controller (PLC), you can adjust the brightness of these lights and mix red, green, and blue light to achieve thousands of colors. A tempered glass lens protects them from coolants and lubricants, as well as impacts from chips and shavings. All meet IP67 for protection against dust and temporary submersion, so they hold up in wet or dirty environments. They require a cord (sold separately) to connect to your PLC.

Lights with IO link let you control color, brightness, and flashing patterns when used with IO link-enabled machines.

Magnetic mounting brackets (sold separately) allow for quick, temporary installation on metal surfaces inside your machine.

Update conventional fluorescent tubular lights with newer LED technology. These lights match the diameter of most older lights and fit existing brackets without the need to drill new mounting holes. They have a durable lens that resists coolants, lubricants, and impact from chips and shavings. All are rated IP67 for protection against dust and temporary submersion, so these lights can handle your wettest environments.

Style A have a traditional tubular design that distributes light more evenly than Style B. Plug them into a standard outlet and use the switch built into the cord to turn them on and off.

Style B have a flat lens that directs light downward. Hardwire them to your power supply. They come with mounting brackets at each end. Optional mounting brackets (sold separately) clip anywhere along the light, so you can position them where it makes sense for your machine.

Add a power supply (sold separately) to transform your facility’s AC voltage to DC voltage. Mount the power supply outside of your machine to protect it from heat.

Bend these flexible lights around corners or squeeze them into spaces where bulky fixtures won’t fit. They’re brighter than plug-in tape lights, so you can use them for inspections and other detailed work. They’re also a great choice to extend the life of your fluorescent or incandescent fixtures with energy-efficient LEDs. They have a higher CRI (color rendering index) than most other lights, so they illuminate subtle color differences. Each LED is inspected to make sure there are no visible differences in temperature and brightness, so you can combine multiple strips within the same space. Install them on any smooth surface—just peel and stick.

You’ll need a driver to power these lights. Customize your setup: join multiple lights together, use connectors to bridge gaps between stairs or shelves, or add channels to diffuse light within your space (all sold separately).

Note: To shorten a light, cut it at the marked intervals only. Cutting outside these marks can damage the circuit and create dead zones.

The quick-connect four-pole M12 plug on these lights makes them easy to hook up and configure. Mount the male thread on the bottom of the light through a hole and then secure using the included nut and sealing gasket. Lights have LED bulbs for years of maintenance-free operation. They meet IP65 for protection from washdowns.

Mount the male thread on the bottom of the light through a hole and then secure using the included nut. Lights have LED bulbs for years of maintenance-free operation. They meet IP65 for protection from washdowns.