McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    93 Products

    Adjustable-Height Work Platforms

    Image of Specification. Front orientation. Contains Inset. Work Platforms. Adjustable-Height Work Platforms.

    Customize the height of these platforms with a simple turn of the crank. Ideal for shared workstations, they can be raised or lowered to your optimal working height in seconds from a standing position. Unlike other platforms that require manual leg adjustments, each full rotation of the hand crank adjusts them by approximately ⅛". For more space, remove the crank handle once you’ve set the height.
    Note: Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Diamond Tread—A diamond-tread platform prevents slipping. However, it does not allow liquid or debris to pass through.
    Painted Steel—Made of painted steel, these platforms are strong and durable to withstand regular use.
    Overall
    Ht.
    Wd.
    Dp.
    Guardrail
    Ht.
    Material
    Color
    Wt. Cap.,
    lb.
    Wt.,
    lb.
    Platform
    Tread
    Assembly
    Each
    3" to 19" Platform Height
    50" to 66"36"36"39"Painted SteelBlue500192Diamond TreadAssembled9243N11000000000
    50" to 66"48"36"39"Painted SteelBlue500215Diamond TreadAssembled9243N1200000000
     

    Rolling Platform Ladders

    Image of Product. Front orientation. Contains Annotated. Ladders. Rolling Platform Ladders.
    Image of Specification. Front orientation. Contains Border. Diamond-Tread Step. Rolling Platform Ladders.

    Diamond-Tread Step

    Move these sturdy ladders between work areas. They have powder or polyurethane coatings to resist rust. The number of steps listed includes the platform. For regular indoor use, choose a perforated or rubber-coated tread. For dirty jobsites, choose a diamond or serrated tread so debris falls through the steps.
    Note: All ladders meet OSHA or Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Diamond-Tread Step—Diamond tread is coarse for some slip resistance.
    Spring-Loaded Casters—Spring-loaded casters stay stationary while in use—when you step on, the casters retract; when you step off, the casters roll again.
    Step Lock—Ladders with a step lock keep the casters locked until you tap a foot pedal.
    Ladders
    Replacement Casters
    Replacement Wheels
    for Rigid Casters
    Replacement
    Nonskid Feet/Pads
    Platform
    Overall
    No. of
    Steps
    Ht.
    Wd.
    Dp.
    Ht.
    Wd.
    Dp.
    Max. Climbing
    Ht.
    Wt. Cap.,
    lb.
    Ground Clearance
    Ht.
    Wheel
    Configuration
    Wt. Actuation Type
    Assembly
    Specs. Met
    Choose a
    Color
    Each
    No. of
    Casters
    Each
    No. of
    Wheels
    Each
    Pkg.
    Qty.
    Pkg.
    Powder-Coated Steel
     
    Diamond-Tread Steps and Platform
    220"24"20"50"26"28"20"4504"Four Swivel CastersSpring-Loaded CastersAssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow8188T48100000001 Swivel80105T72000000———0479975T99000000
    330"16"10"5 ft.20"26"30"4504"Four Swivel CastersSpring-Loaded CastersAssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow8188T4820000001 Swivel80105T7200000———0479975T9900000
    330"24"20"5 ft.30"36"30"4504"Four Swivel CastersSpring-Loaded CastersAssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow8188T4830000001 Swivel80105T7200000———0479975T9900000
    440"24"20"70"30"41"40"4504"Four Swivel CastersSpring-Loaded CastersAssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow8188T4840000001 Swivel80105T7200000———0479975T9900000
    440"24"30"70"30"51"40"4504"Four Swivel CastersSpring-Loaded CastersAssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow8188T4850000001 Swivel80105T7200000———0479975T9900000
    550"16"10"92"20"40"50"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockAssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow8188T4860000001 Swivel80105T6300000180105T62000000479975T9900000
    550"24"10"92"30"40"50"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockAssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow80105T1110000001 Swivel80105T6300000180105T6200000479975T9900000
    550"24"20"92"30"50"50"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockAssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow8188T4870000001 Swivel80105T6300000180105T6200000479975T9900000
    550"24"30"92"30"60"50"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockAssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow8188T4880000001 Swivel80105T6300000180105T6200000479975T9900000
    65 ft.16"20"102"24"56"5 ft.4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockAssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow8188T4930000001 Swivel80105T6300000180105T6200000479975T9900000
    65 ft.24"10"102"30"46"5 ft.4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockAssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow80105T1120000001 Swivel80105T6300000180105T6200000479975T9900000
    65 ft.24"20"102"30"56"5 ft.4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockAssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow8188T4940000001 Swivel80105T6300000180105T6200000479975T9900000
    65 ft.24"30"102"30"66"5 ft.4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockAssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow8188T4950000001 Swivel80105T6300000180105T6200000479975T9900000
    770"16"20"112"24"63"70"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockAssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow8188T4890000001 Swivel80105T6300000180105T6200000479975T9900000
    770"24"10"112"30"53"70"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockAssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow80105T1130000001 Swivel80105T6300000180105T6200000479975T9900000
    770"24"20"112"30"63"70"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockAssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow8188T4910000001 Swivel80105T6300000180105T6200000479975T9900000
    770"24"30"112"30"73"70"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockAssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow8188T492000000001 Swivel80105T6300000180105T6200000479975T9900000
    880"24"20"110"32"71"80"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockAssembledANSI-ASC A14.7, OSHA Compliant 29 CFR 1910.23Gray, Yellow80105T1140000001 Swivel80105T6300000180105T6200000479975T9900000
    880"24"30"110"32"81"80"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockAssembledANSI-ASC A14.7, OSHA Compliant 29 CFR 1910.23Gray, Yellow80105T1150000001 Swivel80105T6300000180105T6200000479975T9900000
    880"24"30"122"32"81"80"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockAssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow8188T497000000001 Swivel80105T6300000180105T6200000479975T9900000
    990"24"20"10 ft.32"77"90"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockAssembledANSI-ASC A14.7, OSHA Compliant 29 CFR 1910.23Gray, Yellow80105T1160000001 Swivel80105T6300000180105T6200000479975T9900000
    990"24"30"10 ft.32"87"90"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockAssembledANSI-ASC A14.7, OSHA Compliant 29 CFR 1910.23Gray, Yellow80105T117000000001 Swivel80105T6300000180105T6200000479975T9900000
    990"24"30"11 ft.32"87"90"4505"Two Rigid Casters
    and Two Swivel
    Casters
    Step LockAssembledANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow8188T499000000001 Swivel80105T6300000180105T6200000479975T9900000
     

    Forklift Platforms

    Image of Product. Front orientation. Contains Annotated. Work Platforms. Forklift Platforms.
    Image of Product. Platform Shown with Accessories (Sold Separately). Front orientation. Contains Annotated. Work Platforms. Forklift Platforms, 4" Toeboard Height.

    Platform Shown with Accessories (Sold

    Separately)

    Transform your forklift into an elevated work surface. These platforms attach to your forks so you can raise them to the height you need. Use the attachment points to connect fall-arrest equipment.
    Powder-Coated Steel—They’re made of steel to hold up to heavy use, and a powder coating helps prevent rust.
    Diamond Tread—The surface has either diamond tread or wire mesh to keep you from slipping.
    Weight Capacity—Check your forklift’s capacity to make sure it can handle the weight of the platform plus the people and materials you want to lift.
    Specifications Met—Platforms that have Cal/OSHA specifications listed meet dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Platforms
    Long
    Material Trays
    Tool Trays
    Swivel Casters
    For
    Max. Fork
    Overall
    Dp.
    Back Guard
    Ht.
    Guardrail
    Ht.
    Toeboard
    Ht.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Wt.,
    lb.
    Material
    Color
    Platform
    Tread
    Assembly
    Specs. Met
    Each
    Each
    Each
    Each
    36" Overall Width
    36"66"42"4"7 1/2"3 3/4"1,000173Powder-Coated SteelGrayDiamond TreadAssembledANSI/ITSDF B56.17952T6100000007952T410000007952T3500000080105T63000000
    36"84"42"4"7 1/2"3 3/4"1,000201Powder-Coated SteelGrayDiamond TreadAssembledANSI/ITSDF B56.1, Cal/OSHA Compliant Title 8 Section 36427952T6410000007952T41000007952T350000080105T6300000
    48"66"42"4"7 1/2"3 3/4"1,000210Powder-Coated SteelGrayDiamond TreadAssembledANSI/ITSDF B56.17952T620000007952T41000007952T350000080105T6300000
    48"84"42"4"7 1/2"3 3/4"1,000232Powder-Coated SteelGrayDiamond TreadAssembledANSI/ITSDF B56.1, Cal/OSHA Compliant Title 8 Section 36427952T6420000007952T41000007952T350000080105T6300000
     
    48" Overall Width
    48"66"42"4"7 1/2"3 3/4"1,000230Powder-Coated SteelGrayDiamond TreadAssembledANSI/ITSDF B56.17952T630000007952T41000007952T360000080105T6300000
    48"84"42"4"7 1/2"3 3/4"1,000245Powder-Coated SteelGrayDiamond TreadAssembledANSI/ITSDF B56.1, Cal/OSHA Compliant Title 8 Section 36427952T643000000007952T41000007952T360000080105T6300000
     

    Tilt-to-Roll High-Stability Platform Ladders

    Image of Product. Front orientation. Contains Annotated. Ladders. Tilt-to-Roll High-Stability Platform Ladders, Style A.
    Image of Specification. Front orientation. Contains Border. Diamond-Tread Step. Tilt-to-Roll High-Stability Platform Ladders.

    Style A

    Diamond-Tread Step

    Tilt these ladders to roll them on their wheels. When you set them upright again, the wheels lift off the floor to keep them stationary while in use. Made of powder-coated steel, these ladders are durable enough for regular use. The number of steps listed includes the platform.
    Note: Ladders that have OSHA or Cal/OSHA specifications listed meet dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Style A
    Image of Product. Front orientation. Contains Annotated. Ladders. Tilt-to-Roll High-Stability Platform Ladders, Style A.
    Image of Specification. Front orientation. Contains Border. Diamond-Tread Step. Tilt-to-Roll High-Stability Platform Ladders.

    Diamond-Tread Step

    Style A ladders have a bar across the top platform for added support and stability.
    Diamond-Tread Step—Diamond steps have an open grid that lets liquids, such as oil, and dirt pass through.
    Ladders
    Replacement
    Nonskid Feet/Pads
    Platform
    Overall
    No. of
    Steps
    Ht.
    Wd.
    Dp.
    Ht.
    Wd.
    Dp.
    Max. Climbing
    Ht.
    Wt. Cap.,
    lb.
    Ground Clearance
    Ht.
    Wheel
    Configuration
    Assembly
    With
    Handrail
    Specs. Met
    Choose a
    Color
    Each
    Pkg.
    Qty.
    Pkg.
    Powder-Coated Steel
     
    Diamond-Tread Steps and Platform
    220"24"10"50"28"24"20"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow14155T110000000179975T88000000
    220"24"20"50"28"34"20"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow14155T15000000179975T8800000
    330"24"10"5 ft.28"30"30"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow14155T12000000179975T8800000
    330"24"20"5 ft.28"41"30"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Yellow14155T162000000179975T8800000
    440"24"10"70"28"37"40"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow14155T13000000179975T8800000
    440"24"20"70"28"47"40"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow14155T17000000179975T8800000
    550"24"20"92"28"54"50"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.23Gray, Yellow14155T18000000179975T8800000
     
    Replacement Wheels

    Corrosion-Resistant Tilt-to-Roll High-Stability Platform Ladders

    Image of Product. Front orientation. Contains Annotated. Ladders. Corrosion-Resistant Tilt-to-Roll High-Stability Platform Ladders.
    Image of Specification. Front orientation. Contains Border. Diamond-Tread Step. Corrosion-Resistant Tilt-to-Roll High-Stability Platform Ladders.

    Diamond-Tread Step

    Made of 304 stainless steel, these ladders are more corrosion resistant than steel and aluminum ladders. They withstand wet environments and repeated washdowns. Tilt these ladders to roll them on their wheels. When you set the ladders upright again, the wheels lift off the floor to keep them stationary while in use. The number of steps listed includes the platform.
    Note: Ladders meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Diamond-Tread Step—Diamond steps have an open grid that lets liquids, such as oil, and dirt pass through better than serrated steps. Without raised treads, they’re comfortable to stand on—even when you’re not wearing work boots.
    Ladders
    Replacement
    Nonskid Feet/Pads
    Platform
    Overall
    No. of
    Steps
    Ht.
    Wd.
    Dp.
    Ht.
    Wd.
    Dp.
    Max. Climbing
    Ht.
    Wt. Cap.,
    lb.
    Ground Clearance
    Ht.
    Wheel
    Configuration
    Assembly
    With
    Handrail
    Specs. Met
    Each
    Pkg.
    Qty.
    Pkg.
    304 Stainless Steel
     
    Diamond-Tread Steps and Platform
    220"24"10"50"28"23"20"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T1110000000179975T88000000
    220"24"20"50"28"34"20"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T11200000000179975T8800000
    330"24"10"5 ft.28"30"30"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T4200000000179975T8800000
    330"24"20"5 ft.28"40"30"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T4600000000179975T8800000
    440"24"10"70"28"37"40"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T4300000000179975T8800000
    440"24"20"70"28"46"40"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T4700000000179975T8800000
    550"24"10"92"28"43"50"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T11300000000179975T8800000
    550"24"20"92"28"54"50"4502"Two Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.238250T4800000000179975T8800000
     
    Replacement Wheels

    Space-Saver Crossover Stairs

    Image of Product. Front orientation. Contains Annotated. Crossover Stairs. Space-Saver Crossover Stairs, Style 1.

    Style 1

    Set at a steeper angle than our other crossover stairs, these stairs require less floor space. They let you walk over conveyors, machines, and pipes. However, the steeper incline makes it more difficult to ascend and descend the stairs.
    Powder-Coated Steel—Made of steel, these stairs withstand heavy use in most industrial applications. A powder coating adds protection from corrosion.
    Diamond-Tread Step—Diamond treads also prevent slipping. However, they do not let liquids and dirt pass through.
    Overall
    Ground
    Clearance
    Platform
    Step
    Mounting
    Holes
    Style
    Ht.
    (A)
    Wd.
    (B)
    Dp.
    (C)
    Ht.
    (D)
    Dp. (E)
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    No. of
    Steps
    Handrail
    Ht.
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Assembly
    Each
    Gray Powder-Coated Steel
     
    Flat Step with Diamond Tread
    174"29"54"30"25 9/16"32"24"33"24 1/8"4 7/8"500442"No45/8"Unassembled7563T211000000000
    174"29"65"30"37 5/16"32"24"44"24 1/8"4 7/8"500442"No45/8"Unassembled7563T51100000000
    182"29"60"38"25 9/16"40"24"33"24 1/8"4 7/8"500542"No45/8"Unassembled7563T22100000000
    182"29"71"38"37 5/16"40"24"44"24 1/8"4 7/8"500542"No45/8"Unassembled7563T52100000000
    190"29"65"46"25 9/16"4 ft.24"33"24 1/8"4 7/8"500642"No45/8"Unassembled7563T23100000000
    190"29"77"46"37 5/16"4 ft.24"44"24 1/8"4 7/8"500642"No45/8"Unassembled7563T53100000000
    198"29"71"54"25 9/16"56"24"33"24 1/8"4 7/8"500742"No45/8"Unassembled7563T24100000000
    198"29"83"54"37 5/16"56"24"44"24 1/8"4 7/8"500742"No45/8"Unassembled7563T54100000000
     

    Straddle Base Rolling Platform Ladders

    Image of Product. Front orientation. Contains Annotated. Ladders. Straddle Base Rolling Platform Ladders.
    Image of Specification. Front orientation. Contains Border. Diamond-Tread Step. Straddle Base Rolling Platform Ladders.

    Diamond-Tread Step

    Get close to your work even when pipes or other objects are in the way. With no horizontal braces, these ladders can straddle obstructions. Platform and steps have a diamond texture for good slip resistance. Tilt these ladders to roll them on their wheels. When you set the ladders upright again, the wheels lift off the floor to keep ladders stationary while in use.
    Note: The number of steps listed includes the platform.
    Note: Ladders meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Ladders
    Replacement
    Nonskid Feet/Pads
    Platform
    Overall
    No. of
    Steps
    Ht.
    Wd.
    Dp.
    Ht.
    Wd.
    Dp.
    Max. Climbing
    Ht.
    Wt. Cap.,
    lb.
    Ground Clearance
    Dp.
    Color
    Wheel
    Configuration
    Assembly
    With
    Handrail
    Specs. Met
    Each
    Pkg.
    Qty.
    Pkg.
    Powder-Coated Steel
     
    Diamond-Tread Steps and Platform
    330"24"20"5 ft.28"41"30"35024 1/2"GrayTwo Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.2379885T110000000179975T88000000
    440"24"20"70"28"47"40"35031"GrayTwo Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.2379885T12000000179975T8800000
    550"24"20"92"28"54"50"35036"GrayTwo Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.2379885T13000000179975T8800000
    65 ft.24"20"102"28"60"5 ft.35046 1/2"GrayTwo Rigid CastersAssembledYesANSI-ASC A14.7, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.2379885T14000000179975T8800000
     
    Replacement Wheels

    Crossover Stairs

    Image of Product. Front orientation. Contains Annotated. Crossover Stairs. Crossover Stairs.
    Use these stairs to walk over conveyors, machines, and pipes.
    Diamond-Tread Step—Diamond tread steps also provide slip resistance but do not allow anything to fall through.
    Number of Steps—The number of steps listed is the number of steps on each side including platform.
    Specifications Met—Crossover stairs meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
    Overall
    Ground
    Clearance
    Platform
    Step
    Mounting
    Holes
    Ht.
    (A)
    Wd.
    (B)
    Dp.
    (C)
    Ht.
    (D)
    Dp.
    (E)
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    No. of
    Steps
    Handrail
    Ht.
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Assembly
    Specs. Met
    Each
    Gray Powder-Coated Steel
     
    Flat Step with Diamond Tread
    74"29"78"30"24 7/8"32"24"37"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T111000000000
    74"29"90"30"36 5/8"32"24"49"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T27100000000
    82"29"91"38"24 7/8"40"24"37"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T12100000000
    82"29"103"38"36 5/8"40"24"49"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T28100000000
    90"29"105"46"24 7/8"4 ft.24"37"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T13100000000
    90"29"116"46"36 5/8"4 ft.24"49"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T29100000000
    98"29"118"54"24 7/8"56"24"37"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T14100000000
    98"29"130"54"36 5/8"56"24"49"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T15100000000
     

    Easy-Store Forklift Platforms

    Image of Product. Front orientation. Work Platforms. Easy-Store Forklift Platforms.
    With foldable rails, these platforms can be collapsed to the size of a pallet for easy storage when not in use. Attach them to your forklift for an enclosed, elevated work platform. Securely attach these platforms to your forklifts using the pins behind the forks. A backguard protects you from the moving parts of your forklift. Use the gates on either side for entry.
    You are responsible for adhering to local, state, and federal safety codes, including OSHA.
    Yellow—They are painted bright yellow and are easy to spot while in use.
    Powder-Coated Steel—Made of powder-coated steel, these platforms are durable and rust-resistant.
    Diamond Tread—The walking surface has a diamond-tread texture for good slip resistance.
    Weight Capacity—To prevent accidents and injuries, confirm your forklift can handle the combined weight of the platform, personnel, and materials.
    Overall
    For
    Max. Fork
    Wd.
    Dp.
    Guardrail
    Ht.
    Toeboard
    Ht.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Platform
    Tread
    Assembly
    Each
    Yellow Powder-Coated Steel
     
    70" High Back Guard
    38"38"38"4"7 7/8"3 3/8"600Diamond TreadUnassembled9151N110000000
     
    Casters

    Corrosion-Resistant Crossover Stairs

    Image of Product. Front orientation. Contains Annotated. Crossover Stairs. Corrosion-Resistant Crossover Stairs.
    Use these stairs to walk over conveyors, machines, and pipes.
    Aluminum—Aluminum is a good choice for damp areas and outdoor use.
    Diamond-Tread Step—Diamond tread steps also provide slip resistance but do not allow anything to fall through.
    Number of Steps—The number of steps listed is the number of steps on each side including platform.
    Specifications Met—Crossover stairs meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
    Overall
    Ground
    Clearance
    Platform
    Step
    Mounting
    Holes
    Ht.
    (A)
    Wd.
    (B)
    Dp.
    (C)
    Ht.
    (D)
    Dp.
    (E)
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    No. of
    Steps
    Handrail
    Ht.
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Assembly
    Specs. Met
    Each
    Aluminum
     
    Flat Step with Diamond Tread
    74"29"78"30"24 7/8"32"24"37"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T161000000000
    74"29"90"30"36 5/8"32"24"49"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T35100000000
    82"29"91"38"24 7/8"40"24"37"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T17100000000
    82"29"103"38"36 5/8"40"24"49"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T36100000000
    90"29"105"46"24 7/8"4 ft.24"37"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T18100000000
    90"29"116"46"36 5/8"4 ft.24"49"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T37100000000
    98"29"118"54"24 7/8"56"24"37"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T19100000000
    98"29"130"54"36 5/8"56"24"49"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T38100000000
     

    Corrosion-Resistant Space-Saver Crossover Stairs

    Image of Product. Front orientation. Contains Annotated. Crossover Stairs. Corrosion-Resistant Space-Saver Crossover Stairs.
    Set at a steeper angle than our other crossover stairs, these stairs require less floor space. Use them to walk over conveyors, machines, and pipes.
    You are responsible for adhering to local, state, and federal safety codes, including OSHA.
    Aluminum—Aluminum is a good choice for damp areas and outdoor use.
    Diamond-Tread Step—Diamond tread steps also provide slip resistance but do not allow anything to fall through.
    Number of Steps—The number of steps listed is the number of steps on each side including platform.
    Overall
    Ground
    Clearance
    Platform
    Step
    Mounting
    Holes
    Ht.
    (A)
    Wd.
    (B)
    Dp.
    (C)
    Ht.
    (D)
    Dp. (E)
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    No. of
    Steps
    Handrail
    Ht.
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Assembly
    Each
    Aluminum
     
    Flat Step with Diamond Tread
    74"29"54"30"25 9/16"32"24"33"24 1/8"4 7/8"500442"No45/8"Unassembled7563T411000000000
    74"29"65"30"37 5/16"32"24"44"24 1/8"4 7/8"500442"No45/8"Unassembled7563T61100000000
    82"29"60"38"25 9/16"40"24"33"24 1/8"4 7/8"500542"No45/8"Unassembled7563T42100000000
    82"29"71"38"37 5/16"40"24"44"24 1/8"4 7/8"500542"No45/8"Unassembled7563T62100000000
    90"29"65"46"25 9/16"4 ft.24"33"24 1/8"4 7/8"500642"No45/8"Unassembled7563T43100000000
    90"29"77"46"37 5/16"4 ft.24"44"24 1/8"4 7/8"500642"No45/8"Unassembled7563T63100000000
    98"29"71"54"25 9/16"56"24"33"24 1/8"4 7/8"500742"No45/8"Unassembled7563T44100000000
    98"29"83"54"37 5/16"56"24"44"24 1/8"4 7/8"500742"No45/8"Unassembled7563T64100000000
     
    back to top