McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    60 Products

    Build-Your-Own Fixed Work Platforms

    Image of System. Shown Assembled. Front orientation. Contains Annotated. Work Platforms. Build-Your-Own Fixed Work Platforms.

    Shown Assembled

    Configure a work platform to fit your application.
    First, determine how high your work platform needs to be and choose the stairs that accommodate that height. Then, choose a platform section based on the desired length. Next, choose platform supports that correspond to the height of your stairs—each end of the platform must be supported by a platform support. Finally, choose handrails for the stairs and platform. Assembled work platforms should be secured to a supporting surface (mounting hardware not included).
    Stairs
    Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.
    Serrated Step—Steps are serrated for maximum slip resistance.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    Steps
    Mounting
    Holes
    Platform
    Ht.
    Ground Clearance
    Ht.
    No.
    of
    Wd.
    Dp.
    Tread
    Climbing
    Angle
    Wt. Cap.,
    lb.
    Assembly
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Specs. Met
    Each
    Aluminum
    18"14"124"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N410000000
    27"23"224"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N42000000
    36"32"324"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N43000000
    45"41"424"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N44000000
    54"50"524"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N45000000
    63"59"624"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N46000000
    72"68"724"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N47000000
    81"77"824"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N48000000
     
    Stair Handrails
    Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    For Platform
    Ht.
    Ht.
    Assembly
    Specs. Met
    Each
    Aluminum
    18"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N61000000
    27"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N62000000
    36"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N63000000
    45"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N64000000
    54"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N65000000
    63"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N66000000
    72"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N67000000
    81"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N68000000
     
    Platform Supports
    Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    Mounting
    Holes
    For Platform
    Ht.
    Assembly
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Includes
    Specs. Met
    Each
    Aluminum
    18"UnassembledNo107/16"2 Platform Support LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N510000000
    27"UnassembledNo107/16"2 Platform Support LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N52000000
    36"UnassembledNo107/16"1 Platform Support with 2 LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N53000000
    45"UnassembledNo107/16"1 Platform Support with 2 LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N54000000
    54"UnassembledNo107/16"1 Platform Support with 2 LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N55000000
    63"UnassembledNo107/16"1 Platform Support with 2 LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N56000000
    72"UnassembledNo107/16"1 Platform Support with 2 LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N57000000
    81"UnassembledNo107/16"1 Platform Support with 2 LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N58000000
     
    Platform Sections
    Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.
    Serrated—Platform is serrated for maximum slip resistance.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    Lg.
    Wd.
    Wt. Cap.,
    lb.
    Platform
    Tread
    Assembly
    Specs. Met
    Each
    Aluminum
    30"30"500SerratedUnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N710000000
    60"30"500SerratedUnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N72000000
    90"30"500SerratedUnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N1100000000
    120"30"500SerratedUnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N7300000000
     
    Platform Handrails
    Platform handrails have built-in toeboards.
    Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    For Platform
    Lg.
    Ht.
    Toeboard
    Ht.
    Assembly
    Specs. Met
    Each
    Aluminum
    30"42"4"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N810000000
    60"42"4"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N82000000
     

    Antifatigue Work Platforms

    Image of Product. Front orientation. Work Platforms. Antifatigue Work Platforms.
    Turn the legs to raise or lower the platform height.
    Yellow—Platforms are bright yellow to stand out in busy areas.
    Powder-Coated Steel—Made of steel, they’re durable enough to last on shop floors or assembly lines. Their powder coating helps prevent rust.
    Vinyl Foam Mat—A vinyl foam mat cushions your feet and reduces fatigue when you’re standing on these platforms for long periods.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Platforms
    Replacement Feet
    Overall
    Top
    Step
    Mat
    Wd.
    Dp.
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    Wt.,
    lb.
    Material
    Color
    Assembly
    Features
    Specs. Met
    Each
    Component
    Each
    Yellow Powder-Coated Steel
     
    5" to 8" High
    24"19"24"19"80034Vinyl FoamBlueUnassembledNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8341T110000000Rubber Nonskid Foot8341T9100000
    24"24"24"24"80040Vinyl FoamBlueUnassembledNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8341T12000000Rubber Nonskid Foot8341T910000
    36"19"36"19"80045Vinyl FoamBlueUnassembledNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8341T13000000Rubber Nonskid Foot8341T910000
    36"24"36"24"80055Vinyl FoamBlueUnassembledNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8341T22000000Rubber Nonskid Foot8341T910000
    48"19"48"19"80055Vinyl FoamBlueUnassembledNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8341T14000000Rubber Nonskid Foot8341T910000
    48"24"48"24"80069Vinyl FoamBlueUnassembledNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8341T15000000Rubber Nonskid Foot8341T910000
    72"24"72"24"800110Vinyl FoamBlueUnassembledNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8341T16000000Rubber Nonskid Foot8341T910000
     
    9" to 14" High
    24"19"24"19"80037Vinyl FoamBlueUnassembledNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8341T31000000Rubber Nonskid Foot8341T910000
    24"24"24"24"80044Vinyl FoamBlueUnassembledNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8341T41000000Rubber Nonskid Foot8341T910000
    36"19"36"19"80048Vinyl FoamBlueUnassembledNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8341T32000000Rubber Nonskid Foot8341T910000
    36"24"36"24"80057Vinyl FoamBlueUnassembledNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8341T42000000Rubber Nonskid Foot8341T910000
    48"19"48"19"80059Vinyl FoamBlueUnassembledNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8341T33000000Rubber Nonskid Foot8341T910000
    48"24"48"24"80072Vinyl FoamBlueUnassembledNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8341T43000000Rubber Nonskid Foot8341T910000
    72"24"72"24"800101Vinyl FoamBlueUnassembledNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8341T45000000Rubber Nonskid Foot8341T910000
     

    Rolling Work Platforms

    Equipped with four casters, these platforms are easy to move between work areas. When you stand on these platforms, the spring-loaded casters automatically retract for a stable surface.
    Style 2
    Image of Attribute. Front orientation. Contains Annotated. Work Platforms. Rolling Work Platforms, Style 2.
    Style 2 have handrails on both sides and guardrails around the platform for extra stability.
    Powder-Coated Steel—Powder-coated steel platforms withstand heavy use in most industrial applications and resist rust.
    Serrated Step—Serrated treads give you maximum slip resistance and allow liquids and debris to pass through.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Platforms
    Replacement
    Swivel Casters
    Replacement
    Rigid Casters
    Replacement
    Nonskid Ladder Feet
    Platform
    Overall
    Steps
    Max. Platform
    Ht.
    Wd.
    Dp.
    Wd.
    (B)
    Dp.
    (C)
    Wd.
    Dp.
    Tread
    Wt. Cap.,
    lb.
    Wt.,
    lb.
    Assembly
    Wheel Configuration
    Features
    Specs. Met
    Each
    Each
    Each
    Material
    Each
    Gray Powder-Coated Steel
     
    56" Overall Height (A)
    20"24"35"34"54"24"10"Serrated80091AssembledTwo Rigid Casters and Two Swivel CastersHandrail, Nonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D9248N2400000009248N280000009261N15000000Rubber
    		9261N16000000
    20"24"47"34"66"24"10"Serrated80098AssembledTwo Rigid Casters and Two Swivel CastersHandrail, Nonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D9248N250000009248N28000009261N1500000Rubber
    		9261N1600000
    20"36"35"40"54"36"10"Serrated800122AssembledTwo Rigid Casters and Two Swivel CastersHandrail, Nonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D9248N260000009248N28000009261N1500000Rubber
    		9261N1600000
    20"36"47"40"66"36"10"Serrated800148AssembledTwo Rigid Casters and Two Swivel CastersHandrail, Nonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D9248N270000009248N28000009261N1500000Rubber
    		9261N1600000
     
    Style 3
    Image of Attribute. Front orientation. Contains Annotated. Work Platforms. Rolling Work Platforms, Style 3.
    Style 3 have a handrail on only one side for unrestricted access to a conveyor or machinery.
    Aluminum—Aluminum platforms are lighter weight than steel platforms and resist corrosion.
    Serrated Step—Serrated treads give you maximum slip resistance and allow liquids and debris to pass through.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Platform
    Overall
    Steps
    Max. Platform
    Ht.
    Wd.
    Dp.
    Wd.
    (B)
    Dp.
    (C)
    Wd.
    Dp.
    Tread
    Wt. Cap.,
    lb.
    Wt.,
    lb.
    Assembly
    Wheel
    Configuration
    Features
    Specs. Met
    Each
    Aluminum
     
    50" Overall Height (A)
    20"24"24"28"46"24"10 1/2"Serrated50040UnassembledFour Swivel CastersHandrail, Nonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8561T10000000
    20"24"39 1/2"28"62"24"10 1/2"Serrated50050UnassembledFour Swivel CastersHandrail, Nonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D8561T2000000
     

    Tilt-to-Roll Work Platforms

    Image of Product. Front orientation. Contains Annotated. Work Platforms. Tilt-to-Roll Work Platforms.
    Image of Specification. Front orientation. Contains Border. Serrated Step. Tilt-to-Roll Work Platforms.

    Serrated Step

    Tip these platforms onto their casters to roll them wherever you need them—they give you a step up to your work and a large surface to stand on.
    Powder-Coated Steel—Made from steel, these platforms are durable enough to last on shop floors or assembly lines. Their powder coating helps prevent rust.
    Serrated—The surface is serrated to prevent slips and allow liquid and debris to fall through.
    Nonskid Feet—When you set them down, their rubber feet grip the floor and keep them from moving.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Platforms
    Replacement
    Rigid Casters
    Replacement
    Nonskid Ladder Feet
    Platform
    Overall
    Steps
    Wd.
    (C)
    Dp.
    (D)
    Tread
    Wd.
    (A)
    Dp.
    (B)
    Wd.
    (E)
    Dp.
    (F)
    Tread
    Wt. Cap.,
    lb.
    Wt.,
    lb.
    Assembly
    Wheel
    Configuration
    Features
    Specs. Met
    Each
    Each
    Material
    Each
    Gray Powder-Coated Steel
     
    20" High
    24"35"Serrated30"46"24"10"Serrated80065AssembledTwo Rigid CastersNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D9261N1100000009261N15000000Rubber
    		9261N16000000
    24"47"Serrated30"58"24"10"Serrated80072AssembledTwo Rigid CastersNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D9261N120000009261N1500000Rubber
    		9261N1600000
    36"35"Serrated42"46"36"10"Serrated80088AssembledTwo Rigid CastersNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D9261N130000009261N1500000Rubber
    		9261N1600000
    36"47"Serrated42"58"36"10"Serrated800112AssembledTwo Rigid CastersNonskid FeetANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D9261N140000009261N1500000Rubber
    		9261N1600000
     

    Rolling Step Stools

    Image of Product. Front orientation. Contains Annotated. Step Stools. Rolling Step Stools, Style 4.

    Style 4

    With spring-loaded casters, these step stools are easy to move between work areas. When you’re on the stool, the casters retract to keep the stool stationary. When you step off, the casters roll again.
    Perforated, coated, and ribbed steps provide good slip resistance while being easy on your shoes.
    Note: Stools that have OSHA or Cal/OSHA specifications listed meet dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Aluminum—Aluminum stools are lighter than steel, making them easier to move.
    Stools
    Replacement
    Nonskid Feet
    Overall
    Top
    Step
    Style
    No. of
    Steps
    Wt. Cap.,
    lb.
    Ht.
    (A)
    Wd.
    (B)
    Dp.
    (C)
    Ht.
    Wd.
    Dp.
    Assembly
    Wheel
    Configuration
    Specs. Met
    Each
    Pkg.
    Qty.
    Pkg.
    Aluminum
     
    With Ribbed Steps
    4135012"18"21"12"16"14"AssembledFour Swivel CastersCal/OSHA Compliant Title 8 Section 3622
    Cal/OSHA Compliant Title 8 Section 3627
    OSHA Compliant 29 CFR 1910 Subpart D
    ANSI/ASSP A1264.1    		5804T51000000045804T6100000
     
    back to top