McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    33 Products

    Build-Your-Own Fixed Work Platforms

    Image of System. Shown Assembled. Front orientation. Contains Annotated. Work Platforms. Build-Your-Own Fixed Work Platforms.

    Shown Assembled

    Configure a work platform to fit your application.
    First, determine how high your work platform needs to be and choose the stairs that accommodate that height. Then, choose a platform section based on the desired length. Next, choose platform supports that correspond to the height of your stairs—each end of the platform must be supported by a platform support. Finally, choose handrails for the stairs and platform. Assembled work platforms should be secured to a supporting surface (mounting hardware not included).
    Stairs
    Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.
    Serrated Step—Steps are serrated for maximum slip resistance.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    Steps
    Mounting
    Holes
    Platform
    Ht.
    Ground Clearance
    Ht.
    No.
    of
    Wd.
    Dp.
    Tread
    Climbing
    Angle
    Wt. Cap.,
    lb.
    Assembly
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Specs. Met
    Each
    Aluminum
    18"14"124"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N410000000
    27"23"224"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N42000000
    36"32"324"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N43000000
    45"41"424"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N44000000
    54"50"524"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N45000000
    63"59"624"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N46000000
    72"68"724"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N47000000
    81"77"824"9 1/2"Serrated45°500UnassembledNo47/16"ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N48000000
     
    Stair Handrails
    Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    For Platform
    Ht.
    Ht.
    Assembly
    Specs. Met
    Each
    Aluminum
    18"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N61000000
    27"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N62000000
    36"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N63000000
    45"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N64000000
    54"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N65000000
    63"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N66000000
    72"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N67000000
    81"36 1/2"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N68000000
     
    Platform Supports
    Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    Mounting
    Holes
    For Platform
    Ht.
    Assembly
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Includes
    Specs. Met
    Each
    Aluminum
    18"UnassembledNo107/16"2 Platform Support LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N510000000
    27"UnassembledNo107/16"2 Platform Support LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N52000000
    36"UnassembledNo107/16"1 Platform Support with 2 LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N53000000
    45"UnassembledNo107/16"1 Platform Support with 2 LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N54000000
    54"UnassembledNo107/16"1 Platform Support with 2 LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N55000000
    63"UnassembledNo107/16"1 Platform Support with 2 LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N56000000
    72"UnassembledNo107/16"1 Platform Support with 2 LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N57000000
    81"UnassembledNo107/16"1 Platform Support with 2 LegsANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N58000000
     
    Platform Sections
    Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.
    Serrated—Platform is serrated for maximum slip resistance.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    Lg.
    Wd.
    Wt. Cap.,
    lb.
    Platform
    Tread
    Assembly
    Specs. Met
    Each
    Aluminum
    30"30"500SerratedUnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N710000000
    60"30"500SerratedUnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N72000000
    90"30"500SerratedUnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N1100000000
    120"30"500SerratedUnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N7300000000
     
    Platform Handrails
    Platform handrails have built-in toeboards.
    Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.
    Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
    For Platform
    Lg.
    Ht.
    Toeboard
    Ht.
    Assembly
    Specs. Met
    Each
    Aluminum
    30"42"4"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N810000000
    60"42"4"UnassembledANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D4198N82000000
     

    Overhead Access Work Platforms

    Image of ProductInUse. Front orientation. Work Platforms. Overhead Access Work Platforms.
    Image of Attribute. Front orientation. Contains Annotated. Work Platforms. Overhead Access Work Platforms.
    Roll these platforms into place to access the tops of machinery, trucks, or tanks. They provide a stable surface to reach elevated or hard-to-access areas during maintenance. Unlike rolling scaffolds, these platforms have open guardrails on one side for direct access to equipment.
    A serrated platform prevents slipping and allows liquids and debris to pass through. Height adjusts in 4" increments.
    Yellow—They’re bright yellow to stand out in busy areas.
    Powder-Coated Steel—Made of powder-coated steel, these platforms are rust resistant and durable.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Replacement Jacks—Use jacks to level the platform on uneven ground.
    Platforms
    Replacement
    Swivel Casters
    Replacement
    Jacks
    Platform
    Overall
    Steps
    Ht. (A)
    Wd.
    (B)
    Dp.
    (C)
    Ht. (D)
    Wd.
    (E)
    Dp.
    (F)
    Ground Clearance
    Ht.
    No.
    of
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    Guardrail
    Ht.
    Wheel
    Configuration
    No. of Wheel
    Brakes
    Assembly
    Includes
    Specs. Met
    Each
    Each
    Each
    Yellow Powder-Coated Steel
     
    Serrated Step
    103" to 115"120"24"145" to 157"152"50"103" to 115"1024"1 1/2"45042"Four Swivel Casters4UnassembledFour Outriggers, Four Screw JacksCal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3282, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910 Subpart D9215N1110000000009215N11200000009215N1130000000
     
    back to top