For large workpieces, these vises open three times as wide as standard tilting-head vises. Tilt and lock the head to position work at an angle.

Two vise heads tilt and rotate 360°, locking in place to hold work at any angle.

Hold tiny workpieces in these compact vises.

Made of 304 stainless steel to stand up to washdown environments, such as food and beverage production, these are the most corrosion-resistant vises we offer.

Designed for outdoor use, these vises have a finish that resists corrosion.

For big jobs, these vises have a wider jaw opening, deeper throat depth, and larger footprint than standard vises.

Place over the jaws and tighten the screws to securely attach liners.

Fold the pliable tabs over the jaws to install.

Quickly install and remove the clamp-on base from a benchtop.

Also known as woodworkers' vises, these mount to the underside of your workbench and sit flush with the surface.

The jaws move inward at the same time to consistently position your workpiece in the center of the vise.

Compressed air controlled by a foot pedal allows hands‐free operation. Use these vises in production applications with frequent insertion and removal of workpieces.

Turn the handle to move the jaw on these basic vises.

The base and three sides of the vise are ground flat, enabling mounting on its base, either side, or upright.

Use the adjustment dials to ensure your work is accurately positioned on X and Y axes.

Keep parts in position for machining by mounting these workstops to your vise jaws.

Quickly move parallels in and out of these jaws to raise your workpiece within the vise. Mount jaws to the vise, slide the mating parallels in place, and rest your workpiece on top.

Hardened for wear resistance, these steel jaws are replacements for the ones that come installed on your vise.

Arrange the included pins in a series of holes to position a part at any angle and hold odd-shaped parts securely.

Store vise handles near your milling machine.

The vise body and stationary jaw are one piece for high repeatability, even under heavy clamping loads. Ground flat on the base and three sides, these vises ensure accuracy whether mounted on the base, either side, or upright.

Mount to a machine table to rotate a vise 360° in 1° increments.

Attach these workstops to the side or top of your vise to keep parts in position for machining.

The small size allows multiple vises to be mounted on a single machine table. Frequently used in 4- and 5-axis milling machines, these vises have stepped jaws with serrated teeth that firmly grip just a small portion of your workpiece.

Mount these workstops into slotted vise jaws—they hold workpieces in place and prevent horizontal movement during machining.

To grind, drill, lightly mill, and machine parts that rotate around an axis, these chucks hold parts in place magnetically so you can access their inner and outer diameters.

Arrange the pins in a series of holes to grip parts with angled or uneven sides.

A rubber-covered body provides a comfortable grip. These vises have a rotating end cap on the handle that allows you to apply constant pressure while turning the body of the vise with your fingertips.

Clamp and unclamp with one hand by sliding the knurled ring forward to close the collet.

Press the rotating end cap on the handle with your palm to apply constant pressure while turning the body of the vise with your fingertips.

Each end of the vise has a collet to hold a different tool—turn the collar to close the collets around them.

Pass wires and rods through the hollow body of these vises.

Keep clean rooms free of contaminants. These tripod-mounted vises have rubber-covered jaws that prevent metal-to-metal contact and a plastic-encased chain that seals in lubrication.

Set up the tripod wherever you need to work.

Build a custom clamping system for holding lightweight objects such as beakers and laboratory equipment.

Press the lever to lock the clamp onto material.