McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    27 Products

    Portable Workbenches

    Image of Product. Shown Folded. Front orientation. Workbenches. Portable Workbenches.
    Image of Product. Front orientation. Workbenches. Portable Workbenches.

    Shown Folded

    Fold the legs and use the handle to carry these workbenches with one hand. Push a button on the legs to lower the height 12" for use as a work platform. With the legs folded, the workbench rolls on casters to function as a dolly or creeper.
    The reversible top is plastic on one side and composite wood on the other side. It has an outlet strip with three outlets.
    Top
    Wd.
    Dp.
    Ht.
    Ctr.-to-Ctr.
    Adjustments
    Overall Wt.
    Cap., lb.
    Wt. Cap.,
    lb.
    Thk.
    Wheel Configuration
    Features
    Each
    Portable—Assembled
     
    Orange Composite Wood and Plastic Top with Aluminum Frame
    37 1/2"18"4 3/4" to 30 3/4"12"5005001/2"Two Rigid Casters and Two Swivel CastersCarrying Handle, Folding Legs, Outlet Strip, Reversible Top2100N110000000
     

    Fixture Tables for Parts Inspection

    Create a fixture setup on these tables to inspect your parts. A built-in threaded fixture plate gives you endless possibilities to attach CMM fixturing clamps and other accessories right where you need them. Labeled around the edge with letters and numbers—just like a battleship game board—it’s easy to identify holes and repeat tasks. To adjust their height slightly and move these tables around your workspace, they come with leveling casters. Tables come assembled.
    Tables
    Image of Product. Front orientation. Fixture Tables. Fixture Tables for Parts Inspection.
    Overall
    Holes
    Lg.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Plate
    Thk.
    No.
    of
    Ctr.-to-Ctr.
    Flatness
    Tolerance
    Frame
    Material
    Plate
    Material
    Wheel
    Configuration
    Features
    Each
     
    1/4"-20 Hole Thread Size
    47 1/4"35 3/8"35 3/8"8803/4"1,5641"0.005"Aluminum
    		AluminumFour Swivel CastersLeveling Casters, Numbered and Lettered Holes6365N11000000000
     
    M6 Hole Thread Size
    1,200 mm900 mm900 mm88019 mm1,64525 mm0.127 mmAluminum
    		AluminumFour Swivel CastersLeveling Casters, Numbered and Lettered Holes6365N1200000000
     

    Folding Tables

    Image of Product. Front orientation. Tables. Folding Tables, Style E.
    Image of Specification. Front orientation. Contains Border. Gray Top.

    Style E

    Gray

    Top

    Set up quickly for meetings, training sessions, or events, then fold these tables flat for compact storage and easy transport.
    Style E
    Image of Product. Front orientation. Tables. Folding Tables, Style E.
    Image of Specification. Front orientation. Contains Border. Gray Top.

    Gray

    Top

    Powder-Coated Aluminum Top—Aluminum tables are lightweight, resist corrosion, and won’t warp after extended exposure to moisture, heat, and sunlight.
    29 1/2" High—29 1/2" high tables are standard table height.
    Wt.
    Cap., lb.
    Top
    Ht.
    Wd.
    Dp.
    Top
    Overall
    Color
    Ga.
    Thk.
    Frame Material
    Foot
    Type
    Assembly
    Each
    Stationary with Powder-Coated Aluminum Top
    29 1/2"60"18"3,0003,000Gray120.081"Powder-Coated AluminumGlideAssembled5234T110000000
    29 1/2"60"30"3,0003,000Gray120.081"Powder-Coated AluminumGlideAssembled5234T12000000
    29 1/2"72"30"3,0003,000Gray120.081"Powder-Coated AluminumGlideAssembled5234T15000000
    29 1/2"96"30"3,0003,000Gray120.081"Powder-Coated AluminumGlideAssembled5234T18000000
     

    Partially-Enclosed Carts

    Panels on three sides let you stack material high, while the top shelf is open for use as a work surface.
    Aluminum Frame with Polypropylene Shelves—Rubber Tread-on-Core Wheels
    Image of Product. Polypropylene Cart. Front orientation. Polypropylene Shelf. Partially-Enclosed Carts.

    Polypropylene Cart

    Aluminum carts are lightweight and resist dents and corrosion. They have four swivel casters so they're easy to maneuver. The wheels have a shock- and sound-absorbing rubber tread that provides good traction on smooth and rough floors.
    Shelf
    Wheel
    Overall Wt.
    Cap., lb.
    No.
    of
    Wt. Cap.,
    lb.
    Profile
    Lip Ht.
    Lg.
    Wd.
    Clearance
    Top Shelf
    Ht.
    Handle
    Ht.
    Configuration
    Dia.
    Brake Type
    Caster
    Replaceable
    Assembly
    Each
    3003100Lipped1/4", 1"29 1/4"20 1/4"11 3/4"33 1/2"38"Four Swivel Casters4"Without BrakeYesUnassembled2240T570000000
    Accessories and Replacements for Carts
    Each
    Replacement 4" Swivel Caster2240T64000000
    4 gal. Utility Bin2602T5100000
    8 gal. Utility Bin2602T52000000

    T-Slot Fixture Tables

    Image of ProductInUse. Front orientation. Contains Annotated. Fixture Tables. T-Slot Fixture Tables.
    Image of Product. Front orientation. Fixture Tables. T-Slot Fixture Tables, Tables, Style A.
    Image of Product. Front orientation. Fixture Tables. T-Slot Fixture Tables, Tables, Style B.

    Tables

    Style A

    Tables

    Style B

    Build custom workspaces with no drilling or tapping required. Slide in T-slot bolts or T-slot nuts with setup studs to mount work holders, light machinery, collaborative robots, and more. The T-shaped slots on these tables are spaced 50 mm apart. This is a common layout in modular workbenches used for prototyping, automation, and optical sensor setups. Adjust the leveling feet to compensate for uneven floors and create a stable base. Since tables are made of aluminum, they're nonmagnetic and won’t interfere with robotic sensors, control systems, or communication signals. They’re also lightweight and corrosion resistant for easy handling and frequent cleaning.
    Tables
    Image of Product. Front orientation. Fixture Tables. T-Slot Fixture Tables, Tables, Style A.
    Image of Product. Front orientation. Fixture Tables. T-Slot Fixture Tables, Tables, Style B.
    Image of Specification. Side1 orientation. ZoomedIn view. Contains Annotated, Border. Fixture Tables. T-Slot Fixture Tables, Tables.

    Style A

    Style B

    Style A—Store tools and accessories on the bottom shelf.
    Style B—The back panel adds a vertical fixturing surface for mounting components on another axis.
    Casters—Make tables mobile.
    Fixture Tables
    Casters
    Overall
    Shelves
    T-Slots
    Lg.,
    mm
    Wd.,
    mm
    Ht.,
    mm
    Wt. Cap.,
    lb.
    Movement
    No.
    of
    Clearance,
    mm
    No.
    of
    Wd.,
    mm
    Ctr.-to-Ctr.,
    mm
    Mounting
    Slot Ht., mm
    Back Panel
    Height, mm
    Plate Thk.,
    mm
    Parallel
    Tolerance
    Frame
    Material
    Plate
    Material
    Features
    Each
    Each
    Style A
    1,000500750495Fixed1452108507—12Not RatedAluminum
    		AluminumLeveling Feet7710N14000000000———0
    1,5007507501,045Fixed1452158507—12Not RatedAluminum
    		AluminumLeveling Feet7710N15000000002445T41000000
    1,5001,0007501,045Fixed1452208507—12Not RatedAluminum
    		AluminumLeveling Feet7710N16000000002445T4100000
     
    Style B
    1,0005001,300440———208507500120.3 mmAluminum
    		AluminumLeveling Feet7710N2400000000———0
    1,5007501,300880———208507500120.3 mmAluminum
    		AluminumLeveling Feet7710N25000000002445T4100000
     
    Accessories for Fixture Tables
    Robot Mounts
    Image of Product. Front orientation. Robot Mounts.
    Secure your robot arm to tables.
    Robot Mounting Location
    For Robot Arm Mfr.
    (Series/Model No.)
    Wd.,
    mm
    Lg.,
    mm
    Thk.,
    mm
    Static Load
    Cap.
    T-Slotted Fixture
    Table Mount Type
    Mount
    Type
    Mounting Hole Thread Size
    (No. of Holes)
    Mounting Fasteners
    Included
    Each
    Anodized Aluminum
    FANUC (CRX 5iA)22522522.5Not RatedT-Slot NutBolt OnM8 (4)No8191N120000000
    FANUC (CRX 10iA, 10iA/L, 20iA)22522522.5Not RatedT-Slot NutBolt OnM8 (4)No8191N13000000
    Universal (UR3, UR3e)18018022.5Not RatedT-Slot NutBolt OnM6 (4)No8191N21000000
    Universal (UR5, UR5e)22522522.5Not RatedT-Slot NutBolt OnM8 (4)No8191N22000000
    Universal (UR10, UR10e, UR16e)22522522.5Not RatedT-Slot NutBolt OnM8 (4)No8191N23000000
     
    Angle Plates
    Image of Product. Front orientation. Contains Annotated. Angle Plates.
    Mount workpieces in precisely located holes for repeatable setups. These plates ensure accurate right angles and hold workpieces and fixtures perpendicular to tables.
    Hole
    Slot
    Lg.,
    mm
    Wd.,
    mm
    Ht.,
    mm
    No.
    of
    Dia.,
    mm
    Dp.,
    mm
    No.
    of
    Wd.,
    mm
    Lg.,
    mm
    Wt.,
    lb.
    Material
    Each
    Standard Tolerance
    1502213001417847876Aluminum
    		5230A410000000
    22175446756.512———6Aluminum
    		5230A42000000
    2212214461897121278113Aluminum
    		5230A43000000
     

    T-Slotted Robot Workstations

    Image of ProductInUse. Robot Arm and Attached Tools Not Included. Front orientation. Robot Workstations. T-Slotted Robot Workstations.

    Robot Arm and Attached Tools Not

    Included

    With a top that’s T-slotted from edge to edge, these workstations let you endlessly adjust your robot and fixtures as you iterate setups. Optimize them to hold workpieces, trays, sensors, and more for a variety of robot tasks, from machine tending to dispensing glue. Use the included mount to secure FANUC CRX, Universal Robots (UR), or other common robot arms anywhere on the workstation top. These workstations come fully assembled with hardware to attach the mount to the workstation. However, you’ll need fasteners to attach your robot to the mount.
    These workstations have swivel casters with brakes, so you can roll them between jobs and lock them in place. Store your teach pendant, robot controller, and other accessories behind the cabinet doors below—or remove the doors for easy access.
    Wt.
    Cap., lb.
    Overall
    T-Slot
    For Robot Arm Mfr. (Series/Model No.)
    Top
    Thk.
    Top
    Overall
    Ht.
    Wd.
    Dp.
    No.
    of
    Wd.
    Dp.
    Ctr.-to-Ctr.
    Top Material
    Frame Material
    Wheel
    Configuration
    Foot
    Type
    Each
    FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L)
    Universal Robots (UR3, UR3e, UR5, UR5e,
    UR7e, UR10, UR10e, UR12e, UR16e)
    Dobot (CR 3S, 5S, 7, 10S, 12, 16; NOVA 2, 5)
    Omron (TM 5-700, 5-900)
    Igus (Rebel)
    Doosan (A0509, A0912, E0509, M0609,
    M0617, M1013)
    KUKA (KR 4 R600)     		3"93093037 1/2"63"31 1/2"210.32"0.484"1 1/2", 40 mmAnodized AluminumAnodized AluminumFour Swivel CastersCaster9351N11000000000
    FANUC (CRX 25iA, 30iA)
    Universal Robots (UR20, UR30)
    ABB (IRB 1300)
    AUBO (i/20)
    Omron (TM 12, 14, 16, 20)
    Doosan (H)     		3"93093037 1/2"63"31 1/2"210.32"0.484"1 1/2", 40 mmAnodized AluminumAnodized AluminumFour Swivel CastersCaster9351N1200000000
    back to top