Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Monitor flow with these clear fittings.

Make lightweight connections without the hassle of matching the exact thread type—these fittings connect to NPT, NPTF, BSPP, BSPT, and other universal threads.

The threads on these fittings mate with NPT, NPTF, BSPT, and BSPP threads.

Designed for use in welding applications, these fittings are flame retardant.

Slide tubing into these fittings and secure with a clamp. Use at low pressures up to 80 psi.

Also known as instant fittings, these chemical-resistant plastic fittings connect to tubing with a push, and an internal gripping ring and fluoroelastomer O-ring hold the tubing tight.

Fittings withstand temperatures up to 220° F.

Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 150 psi.

Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 140 psi.

Use these fittings in an air vacuum system to avoid the hassle of brazing and welding. Insert two fittings into a clamp and tighten to form a secure seal in steel tubing.

The smooth finish inside these stainless steel quick-clamp fittings makes it easy to remove product residue.

Use these corrosion-resistant fittings in a low-pressure pipe line.

The plating on these brass fittings creates a shiny finish and provides extra protection in corrosive environments. Fittings have the strength to handle high-pressure applications.

Use these fittings for low-pressure applications in noncorrosive environments.

Also known as no-hub pipe fittings and soil pipe fittings, these fittings are for use in gravity-flow applications both above and below ground.

Connect these fittings to thick-wall plastic pipe—they have thicker, stronger walls than standard-wall fittings, so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They can withstand pressures up to 900 psi.

These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications.

The snap-together design allows you to quickly connect these fittings to pipe with no cement required. Fittings are typically used in gravity-flow drainage applications.

Use these CGA fittings to connect welding hose to pressure regulators and torches.

Couplings have an identical claw-style head that connects to another twist-claw hose coupling with a quarter twist.

To save space and reduce the number of cords in industrial automation setups, these splitters join two devices with M12 connectors to a single cord, distribution block, or I/O module with M12 connectors.

Join two devices with M8 connectors to a single cord, distribution block, or I/O module with M12 connectors to save space and reduce the number of cords in industrial automation setups. Often used with sensors and switches, these splitters send or receive two signals through one connection.

When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.

With a single cord, these splitters join two devices with M12 connectors to a distribution block or I/O module with M12 connectors. Often used with sensors and actuators, they send signals/power to your devices through one connection.

Power multiple devices from one power source.

Attach conduit and armored cable to a knockout in an outlet box or enclosure.

Control flow in two directions from a single source—these valves have two handles for independent operation of each outlet. Use them with water, oil, and inert gas.

Visually inspect flow and debris accumulation through the transparent valve body.

To achieve the maximum possible flow, internal components are designed to reduce flow resistance.

No need for clamps or connectors—duct and fittings have a male end that is slightly smaller than its female end for simple assembly.

Made of PVC plastic to withstand acids, alkalies, salts, and other corrosive vapors and fumes.

Made of CPVC, these lightweight strainers have excellent corrosion resistance and withstand higher temperatures than all of our other plastic Y-strainers.

A wide two-piece body holds more debris than other plastic Y-strainers. The body comes apart for easy cleaning without disconnecting your line.

Withstands temperatures up to 450° F.

For use in medium-pressure applications, these Y-strainers have good corrosion resistance.