Quick-Stop Fall-Arrest Lanyards




A quick-stop lanyard will stop your fall within a few inches. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Dual-leg lanyard attaches to two anchors at once.
Harness End Connection | Anchor End Connection | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Housing Material | Specifications Met | Each | |
Single Leg | ||||||||||||
6 | 310 | Polyester | Webbing | Snap Hook | Steel | Carabiner | Steel | __ | Plastic | ANSI Z359.14 | 0000000 | 0000000 |
9 | 310 | Polyester | Webbing | Carabiner | Steel | Snap Hook | Steel | 1" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
11 | 310 | Polyester | Webbing | Shackle | Steel | Carabiner | Steel | __ | Plastic | ANSI Z359.14 | 0000000 | 000000 |
25 | 310 | Stainless Steel | Wire Rope | Carabiner | Stainless Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
50 | 420 | Stainless Steel | Wire Rope | Swivel Eye | Stainless Steel | Snap Hook | Stainless Steel | 3/4" | Aluminum, Stainless Steel | ANSI Z359.14 | 0000000 | 00000000 |
Dual Leg | ||||||||||||
6 | 310 | UHMW Polyethylene | Webbing | Pin Retainer | Steel | Snap Hook/Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
Electrical Arc-Flash-Resistant Quick-Stop Retracting Fall-Arrest Lanyards


Made with a durable Kevlar webbing, these lanyards meet ASTM F887, so they're tested to hold up against arc flash hazards. They extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. When used together with a harness and anchor, these lanyards help you meet OSHA and ANSI safety standards.
Use Class 1 lanyards when your anchor is at the same level as or above your D-ring.
Class 2 lanyards are more versatile than Class 1 lanyards—use them when your anchor is above your D-ring, at the same level, or up to 5 ft. below. They meet safety standards to prevent fraying or breaking if you fall near a sharp edge.
Harness End Connection | Anchor End Connection | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., ft. | Material | Construction | Type | Material | Type | Material | Carabiner Opening Wd. | Snap Hook Opening Size | Housing Material | Capacity, lbs. | Specifications Met | Each | |
Class 1 | |||||||||||||
1 Anchor End Connection | |||||||||||||
6 | Kevlar | Webbing | Snap Hook | Steel | Carabiner with Swivel Eye | Steel | 1" | 13/16" | Plastic | 310 | ASTM F887, ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502 | 0000000 | 0000000 |
Class 2 | |||||||||||||
1 Anchor End Connection | |||||||||||||
8 | Kevlar | Webbing | Pin Retainer | Aluminum | Snap Hook | Steel | __ | 13/16" | Plastic | 420 | ASTM F887, ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502 | 0000000 | 000000 |
Quick-Stop Retracting Fall-Arrest Lanyards with Alarms


Like an alarm on your car dashboard, these lanyards flash and beep until you're clipped into fall protection on an order picker or other vehicle. They come with a Bluetooth sensor that pairs with the lanyard carabiner. Together they detect when you're onboard and clipped into the anchor point. Compatible with most order pickers, the sensor mounts to the cab of your vehicle and hooks into its wiring for power.
These lanyards extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. These lanyards are Class 1, so they work with D-rings that are at the same level as or below your anchor. When used together with an anchor and a harness, these lanyards help you meet OSHA and ANSI safety standards.
An RFID tag makes these lanyards easy to track during inventory and inspections.
Harness End Connection | Anchor End Connection | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., ft. | Material | Construction | Type | Material | Type | Material | Carabiner Opening Wd. | Housing Material | Batteries Included | Capacity, lbs. | Specifications Met | Includes | Features | Each | |
Class 1 | |||||||||||||||
1 Anchor End Connection | |||||||||||||||
6 | UHMW Polyethylene | Webbing | Carabiner with Swivel Eye | Aluminum | Carabiner with Swivel Eye | Steel | 3/4", 13/16" | Plastic | Yes | 310 | ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Bluetooth Sensor, Sensor Power Cable with Wire Leads, LED Light Strips, Cable Ties | Lightweight Hardware, RFID Tag | 00000000 | 000000000 |
Quick-Stop Fall-Arrest Lanyards with Anchor Point


These lanyards form their own anchor point by attaching directly to a rated structure. A quick-stop lanyard will stop your fall within a few inches. Use in conjunction with a harness for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Hook-over lanyard has a large snap hook that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.
Wraparound lanyard loops around a rated structure such as an I-beam and then attaches to itself to create an anchor point.
Harness End Connection | Anchor End Connection | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Housing Material | Specifications Met | Each | |
Hook Over Single Leg | ||||||||||||
8 | 310 | Polyester | Webbing | Carabiner | Aluminum | Snap Hook | Steel | 2 1/2" | Plastic | ANSI Z359.14 | 00000000 | 0000000 |
Wraparound Single Leg | ||||||||||||
9 | 310 | UHMW Polyethylene | Webbing | Carabiner | Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 00000000 | 000000 |
D-Ring Extension Straps




Add length to your harness D-ring and make it easier to attach a fall-arrest lanyard.
Snap hooks are easy to clip to your existing D-ring.
Webbing loops are more lightweight than snap hooks. They wrap securely around your D-ring.
Wire rope straps resist cuts and abrasion better than webbing straps, so they last longer.
Kevlar straps are tested to meet ASTM F887 standards for jobs where there is a risk of exposure to electric arcs and flames. Since they’re Kevlar, they won’t melt or drip if exposed to flash fires.
Straps with impact-indicating stitching let you know at a glance if the strap has been weakened in a fall. The stitching pops or tears during an impact.
Lg. | Material | Capacity, lbs. | Specifications Met | Features | Each | |
D-Ring × Snap Hook | ||||||
---|---|---|---|---|---|---|
Webbing Construction | ||||||
18" | Polyester | 310 | OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | __ | 000000 | 000000 |
24" | Polyester | 420 | OSHA Compliant 29 CFR 1926.502, ANSI/ASSP Z359.11 | __ | 00000000 | 00000 |
36" | Polyester | 310 | OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502, ANSI/ASSP Z359.3 | Impact-Indicating Stitching | 00000000 | 00000 |
Wire Rope Construction | ||||||
18" | Galvanized Steel | 420 | OSHA Compliant 29 CFR 1926.502, ANSI/ASSP Z359.11, ANSI/ASSP Z359.3 | __ | 00000000 | 00000 |
D-Ring × Webbing Loop | ||||||
Webbing Construction | ||||||
18" | Polyester | 420 | OSHA Compliant 29 CFR 1926.502, ANSI/ASSP Z359.11 | __ | 00000000 | 00000 |
18" | Kevlar | 420 | ASTM F887, OSHA Compliant 29 CFR 1926.502, ANSI/ASSP Z359.11 | __ | 00000000 | 00000 |
Fall-Arrest Harnesses with Lanyards




Stay ready for occasional work at height—these harnesses come with a lanyard. Store them in the included bag when not in use. When they’re used properly with an anchor (not included with all), they help you meet OSHA and ANSI safety standards.
Attach the lanyard to the D-ring on the back, and these harnesses will keep you upright if you fall. To see at a glance if your harness has been weakened by stress, indicator stitching at impact points pops or tears during a fall.
Quick-stop lanyards, also known as SRLs, lock into place quickly to stop your fall in a shorter distance than shock-absorbing lanyards. The lanyard extends and retracts as you change position, giving you freedom to move while keeping the lanyard out of the way.
Lanyard | Anchor End Connection | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Type | Lg., ft. | Material | Construction | Harness Size | For Height | For Weight, lbs. | Waist Size | Harness Material | D-Ring Location (No. of) | Type | Material | Snap Hook Opening Size | Capacity, lbs. | Specifications Met | Includes | Each | |
Front-Buckle Harness—Belt Thigh Buckle | |||||||||||||||||
Quick Stop | 11 | Polyester Fabric | Webbing | One Size | 4'10"-6'6" | 110-320 | 32" to 50" | Polyester | Back (1) | Snap Hook | Steel | 2" | 310 | ANSI/ASSP Z359.11, ANSI/ASSP Z359.14 Class 1, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Lanyard, Storage Bag, Webbing Anchor Point | 0000000 | 0000000 |
Fall-Rescue Kits




Everything you need to rescue a person who is suspended after a fall, even if they're injured or unconscious. These kits come tucked in a storage bag, so you can spring into action at a moment’s notice. The storage bag repels water for protection from the weather.
These are not fall-arrest equipment. For a fall-arrest system, you’ll need a lanyard, harness, and anchor.
Use ascent rescue kits to lift the suspended person back to a stable location, such as an elevated platform. These kits are ideal when the ground is too far to safely lower someone, or obstacles are in the way.
Use descent rescue kits to lower the suspended person to the ground. They include a pole that telescopes for extra reach with a carabiner holder and hook on the end. Use the pole to do a variety of things—install anchors, attach carabiners to a suspended person’s D-ring, or guide someone around obstacles as they descend. You can even use these kits to evacuate yourself from an elevated platform in emergencies such as a fallen ladder or a fire. The pockets on the backpack are labeled, so you’ll be able to find what you need quickly.
Application | Includes | Rope Lg., ft. | Capacity, lbs. | Specifications Met | Each | |
Ascent Rescue | Ratchet Assembly, Rescue Strap, Rope, Rope Clamp, Rope Protector, Storage Bag, Two Carabiners, Wire Rope Clamp | 10 | 420 | __ | 0000000 | 0000000 |
Descent Rescue | Backpack, Long Rope, Rescue Pole, Rescue Pole Storage Bag, Rescue Strap, Rescue/Descent Device with Handwheel, Rope Protector, Tool Lanyard, Two Carabiners, Webbing Anchor Point | 150 | 620 | ANSI/ASSP Z359.4, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | 0000000 | 00000000 |
Self-Operated Fall-Rescue Packs

Clip these lightweight packs onto your fall-arrest harness so you can lower yourself to safety after a fall. They have a D-ring where you can attach your fall-arrest lanyard and 50 ft. of rope coiled inside. If you’re left hanging after a fall, pull the red tab on the shoulder and the pack will gradually release the rope for a controlled descent to the ground. A complete fall-arrest system includes a lanyard, harness, and anchor. When used together with a fall-arrest system, these packs meet OSHA and ANSI safety standards.
Use rescue poles to assist a teammate who’s injured or unconscious. They come with a carabiner and a rope, so you can hook the tab on their pack, pull it, and lower them to the ground.

Rope | |||||||||
---|---|---|---|---|---|---|---|---|---|
Material | D-Ring Location (No. of) | Lg., ft. | Material | Construction | Capacity, lbs. | Specifications Met | Features | Each | |
Nylon | Back (1) | 50 | Aramid Fabric | Braided | 310 | ANSI/ASSP Z359.9, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | RFID Tag | 0000000 | 0000000 |

Rope | Carabiner | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Extended Lg., ft. | Retracted Lg., ft. | Material | Lg., ft. | Material | Construction | Opening Wd. | Material | Capacity, lbs. | Includes | Each | |
10 | 2 | Aluminum | 12 | Polypropylene Plastic | Braided | 13/16" | Aluminum | 310 | Carabiner, Carrying Case with RFID Tag, Rope | 0000000 | 0000000 |
Self-Rescue Fall-Arrest Harnesses



Lower yourself to safety after a fall. These harnesses are designed for solo work or remote locations where rescue teams can't reach you. Attach a lanyard to the D-ring on the back, and if you fall, these harnesses will keep you upright. For a controlled descent to the ground, pull the tab on the shoulder to unfurl the 65 ft. rope. Padding on the back and shoulders makes these harnesses comfortable, even when worn for long periods. When used together with a lanyard and anchor, they help you meet OSHA and ANSI safety standards.
Use rescue poles to assist a teammate who needs help. Reach up with the pole to attach the included carabiner and rope to someone’s harness, then pull on the rope to guide your teammate to the ground.


Rope | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Harness Size | For Height | For Weight, lbs. | Waist Size | Harness Material | D-Ring Location (No. of) | Lg., ft. | Material | Construction | Capacity, lbs. | Specifications Met | Each | |
Back and Shoulder Padding | ||||||||||||
Front-Buckle Harness—Squeeze-Release Thigh Buckle | ||||||||||||
M/L | 5'4"-6'5" | 150-225 | 32" to 48" | Polyester | Back (1) | 65 | Aramid Fabric | Braided | 310 | ANSI/ASSP Z359.4, ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140 | 00000000 | 000000000 |
XL | 5'4"-6'6" | 225-300 | 36" to 52" | Polyester | Back (1) | 65 | Aramid Fabric | Braided | 310 | ANSI/ASSP Z359.4, ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140 | 00000000 | 00000000 |

Rope | Carabiner | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Extended Lg., ft. | Retracted Lg., ft. | Material | Lg., ft. | Material | Opening Wd. | Material | Capacity, lbs. | Includes | Each | |
11 | 2 1/2 | Aluminum | 11 | Nylon Plastic | 3/4" | Aluminum | 5,000 | Carabiner, Rope, Storage Bag | 00000000 | 0000000 |
Swivel-Fork-to-Swivel-Fork Retractable Lanyards—Not for Lifting


The swivel fork allows the lanyard to rotate freely.
Swivel Fork | Clear Vinyl-Plastic Coated | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Extended Lg. | Retracted Lg. | Capacity, lbs. | Lg. | Inside Wd. | For Pin Dia. | For Pin Usable Lg. | Material | Temperature Range, °F | Each | |
Galvanized Steel | ||||||||||
1/16" Dia.—7 × 7 Construction | ||||||||||
12" | 6" | 100 | 1 1/16" | 3/32" | 3/16" | 3/16" | 18-8 Stainless Steel | -40° to 170° | 000000000 | 000000 |
18" | 6 1/4" | 100 | 1 1/16" | 3/32" | 3/16" | 3/16" | 18-8 Stainless Steel | -40° to 170° | 000000000 | 00000 |
24" | 6 1/2" | 100 | 1 1/16" | 3/32" | 3/16" | 3/16" | 18-8 Stainless Steel | -40° to 170° | 000000000 | 00000 |
3ft. | 7" | 100 | 1 1/16" | 3/32" | 3/16" | 3/16" | 18-8 Stainless Steel | -40° to 170° | 000000000 | 00000 |
4ft. | 7 1/2" | 100 | 1 1/16" | 3/32" | 3/16" | 3/16" | 18-8 Stainless Steel | -40° to 170° | 000000000 | 00000 |