Keep a variety of grease fitting shapes, styles, and sizes on hand.

To protect equipment from damage, the slit in the threads of these fittings acts like a breather vent, releasing any excess pressure and grease.

The nipple doesn't stick out, so these fittings fit in tight spaces and won't be damaged if something knocks into them.

The pins on these fittings lock with dispensing tips for pin-style fittings to create a tight seal.

To fit securely in unthreaded holes, these fittings cut threads as they’re installed.

Ensure a secure fit in unthreaded holes—these fittings cut threads as they’re installed. Use these fittings in tight spaces where protruding fittings won't work.

Access difficult-to-reach lubrication points from up to 10 ft. away.

Flush out clogged grease in your fitting. Tapping these tools with a hammer forces light oil through your fitting and removes contamination from bearings, joints, and other parts.

Choose these blocks if you need to lubricate multiple points but need to control how each is greased. Unlike grease fitting manifolds, these blocks have multiple fittings, so you control what each point receives and when.

Save time by sending grease from one fitting to multiple points. These manifolds come with everything you need to set up a remote lubrication system.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Lubricate standard grease fittings in hard-to-reach areas. Extensions have a quick-disconnect fitting that snaps into your dispensing tip for standard grease fittings.

Sets include dispensing tips for grease fittings and bare lubrication points.

Dispense small amounts of grease with one of these compact guns.

Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Protect sensitive parts, such as motor and bearing seals, from damage by monitoring the pressure of the grease you’re dispensing.

Designed to lubricate linear motion components, such as slide bearings, guides, and ball screws, these guns work exclusively with THK grease cartridges and fittings.

These guns deliver twice as much grease per stroke than standard lever-grip guns.

Dispense small amounts of grease with this compact gun.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

This gun comes filled with 2 oz. of lithium-thickened grease.

More portable than air-powered options, these guns operate on a rechargeable battery.

Connect these guns to container-mount dispensers for controlled dispensing.