Protect impact-prone surfaces from scratches, chips, and abrasion with this thick, conformable tape.

In addition to resisting harsh chemicals, this tape withstands moisture, abrasion, and repeated impact.

Protect labels from moisture, oil, solvents, alkalies, and most acids.

Easy to apply and remove, this film tape protects touch screens and other delicate parts during manufacturing and shipping.

Cover holes, fastener heads, and small areas with these shapes.

Use this solvent-resistant plastic tape for anodizing and electroplating applications.

Aluminum foil is laminated to a tough fiberglass cloth to form a high-strength, reflective tape that resists temperatures up to 500° F. Use it for flame-spray masking and wire harness heat shielding.

Brush on this liquid to mask small surfaces and irregular shapes.

A high-tack adhesive on one side of this crepe paper tape sticks to plastic sheeting, and a clean-release adhesive on the other side prevents surface damage. Also known as containment tape.

The adhesive on this crepe paper tape won't damage painted and finished surfaces.

This crepe paper tape keeps its hold, even on 300° F surfaces.

Only one edge of this kraft paper tape has adhesive. Apply the sticky side along edges and molding, and the other edge sticks out to catch drips.

This vinyl tape meets clean room requirements and won't leave residue behind. It comes sealed in a plastic bag.

At half the thickness of our other masking tape for electronics, this polyimide tape conforms easily to components.

Providing all-weather corrosion protection, this vinyl tape resists salt water, UV light, acids, and alkalies. Use it to wrap pipes and electrical conduit both above and below ground.

Made from stainless steel, this noncorrosive, nonstaining, and nonmagnetic tape bonds to metal. Patch scratched coatings and finishes to prevent corrosion in marine, food-processing, and nuclear applications.

Made to the highest standards for cleanliness, this tape meets clean room requirements. It releases minimal contaminants, leaves no residue behind, and comes sealed in a plastic bag. Use it to mark hazardous items or areas.

Mark aisles and stairs with a high-contrast reflective strip.

Reduce rattles and squeaks between parts with this abrasionresistant flocked tape. The acrylic adhesive sticks even on hard-to-bond plastics.

Control the unwanted noise that comes from vibrating panels and support structures. This aluminum foil tape reduces vibration by converting it into a small amount of heat.

Also known as Ruby Red lithographer's tape, this semi-clear tape filters out light that can affect photo-sensitive film and equipment.

Cover chutes, packaging lines, and slides with this tape for a slippery, nonstick surface that resists abrasion and impact.

Add a slippery surface to difficult-to-bond surfaces, such as plastic, foam, and powder-coated metal.

Reduce noise and vibration in chutes, bins, and similar delivery systems with this UHMW-faced foam tape.

Our most slippery tape, the slick surface allows items to glide smoothly over it.

Low-Friction Tape Shapes Made with Teflon® PTFE.

Also known as skived tape, this low-friction tape stretches to conform to irregular surfaces.

Use this slippery PTFE-coated tape for a smooth release on heat sealers and molds.

PEEK offers the best wear and abrasion resistance of our low-friction tapes. Use it for wire wraps and sliding bearing surfaces.

Patch and seal roofs, window frames, gutters, and vents with this conformable tape.

Often used for weatherstripping and sealing gaps around windows, doors, and hatches; this tough tape keeps out moisture, dirt, heat, and cold.

This tough, abrasion-resistant tape sticks to itself, so you can layer it over joints and seams to create an extra-strong bond. The thick adhesive conforms to fasteners and gaps to keep water out, even in extreme conditions.

Stop water penetration with this tacky, flexible tape. It conforms to irregular shapes and expands to fill gaps. Use it on freezers, windows, and in marine applications.

Wrap this tape around carbon fiber and other composite parts, then heat to 150° F. Tape shrinks to squeeze out air bubbles and apply pressure so parts cure without voids.

Use this glossy tape to seal seams and repair vinyl material such as banners.

Create dams in pipes before welding, then wash away with water or steam.

The most conformable foam tape we offer, use this tape for mounting, gasketing, and damping sound and vibration. It has adhesive on both sides.

Used to mount panels, signs, and dispensers, this foam tape absorbs shock and provides high strength holding power on rigid surfaces.

Tape is cut into convenient discs and rectangles.

Use this tape outdoors for sealing and mounting signs and security control panels.

Prevent the spread of fire while sealing, cushioning, and damping vibration. This tape has adhesive on both sides.

Use this tape for light duty mounting, as well as to splice paper, foil, film, and fabric.

Create strong, permanent bonds that can replace mechanical fasteners.

Use this clear tape for strong, invisible bonds.

The acrylic adhesive on this tape sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.

Use these clear sheets for strong, invisible bonds.

Use these clear shapes for strong, invisible bonds.

Foam damps vibration while securing lightweight objects, such as nameplates, dispensers, and smoke alarms. This tape has a tacky adhesive on one side and a permanent adhesive on the other.

This tape has a high-tack adhesive that bonds quickly to rough surfaces such as wood, plaster, stucco, brick, metal, and cement.

Only 0.0019" thick, so spliced film and paper easily pass through machinery without breaking.

Seal and mask rough surfaces such as concrete and stucco with this tape. The adhesive removes cleanly, even after long-term exposure to moisture and UV light.

Temporarily mount drawings and blueprints —this tape releases cleanly without damaging paper.

For use in clean rooms, this tape won't leave residue behind.

Use this rubber tape to splice cable in high-voltage applications.

Also known as Scotchfil, this noncorrosive putty tape wraps, stretches, and molds around irregular shapes for insulation buildup.

At only 0.0025" thick, this tape combines conformability with durability and abrasion resistance.

Apply this liquid for a skin-tight protective coating that insulates and resists moisture, acids, and corrosion.

In the event of a fire, this rubber tape expands to protect cables from flames and heat.

This puncture- and cut-resistant cotton tape is coated with a high-grade electrical-insulating varnish. Also known as cambric tape.

Quickly conduct heat away from electronic components. Kapton® polyimide gives this tape excellent electrical isolation.

This polyester tape has a woven mesh edge that conducts electricity. Use it to shield cables and electronic components from EMI (electromagnetic interference).

A coating on this polyimide tape minimizes ESD (electrostatic discharge) when unwound from the roll and also during removal.

Made of polyester fabric with a copper/nickel filler, this tape is highly conductive throughout, including the adhesive.

Use this film on metal and plastic parts, appliances, and electronic equipment for protection against damage during packaging, shipping, and installation.

Commonly used on stair rails, vehicle panels, and heavy equipment, this durable rubber film is tear resistant. Use it to protect metal, wood, plastic, composite, and painted surfaces from damage.

Press this optically clear film into place on windows, mirrors, and glass surfaces. When one layer gets scratched or marred, peel it away to expose a new layer.

Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.

Because this natural rubber foam readily bounces back to shape after compression, it’s a good choice for repetitive sealing applications, such as on doors.

Good for tough vacuum-sealing and low closure-force applications, these polyurethane foam sheets and strips have open/closed cells to keep water, air, and gases from being absorbed when they are compressed at least 25%. Even after extended compression, all bounce back to shape faster than other foams we offer.

Even after extended compression, these high-performance polyurethane foam sheets and strips bounce back to shape faster than any other foam we offer. Also known as Poron urethane, they also stand up to wear caused by rubbing and scraping.

When these sheets and strips are exposed to flames, the surface chars to create a protective barrier that prevents melting, dripping, and the possibility of spreading fire.

These sheets and strips are made of cross-linked polyethylene, so they are stronger and more chemical resistant than other types of polyethylene foam.

Seal and damp vibration around high-temperature food-service equipment with these silicone foam sheets and strips.

Prevent the spread of flames with these self-extinguishing silicone foam sheets and strips.

This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.

Even after exposure to sunlight, rain, and snow, these silicone foam strips remain flexible.

Made from a blend of Buna-N, neoprene, and vinyl, these foam strips have good resistance to oil.

Tear a strip of tape off the perforated roll for easy, uniform installation.

Wrap fingers to protect against cuts and abrasions without limiting dexterity.

Cover heavily-used ADA-compliant door handles to help keep them free of germs. These covers are clear in color, so details on the handle show through.

Apply this tape to handles, pull and push bars, and other frequently-touched surfaces to help limit the spread of germs and diseases.

Very soft and conformable, this expanded PTFE gasket tape compresses into an extremely thin profile. Use it to create a leak-resistant seal in tight-tolerance applications, such as on precision machinery.