PTFE Grease Sprays | McMaster-Carr

Filter by

Container Type

For Use On

Trade Name

DuPont® Chain-Saver Wax-Based Lubricant

DuPont® Non-Stick Dry Film Lubricant

DuPont® Pro Grease White Lithium Premium

DuPont® Silicone Lubricant

LPS Magnum

LU 205 Food Grade Chain

LU 708 High Performance Dry

MR 311 Dry Film Release Agent

Slick 50 OneLube

Tri-Flow Industrial

WD-40 Specialist Dry Lube

Lubricant Type

Additive

Material

Maximum Temperature

Minimum Temperature

Thickener

Manufacturer

Container Net Weight

Performance

Food Industry Standard

FDA Compliant 21 CFR 178.3570

For Use With

Melting Temperature

Base Oil

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

REACH

Compliant

Not Compliant

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

RoHS

40 Products

Moisture-Resistant Grease

Aerosol

Can

Formulated to adhere to metal parts and stay in place in wet environments, this grease is commonly used in pulp and paper manufacturing and water management facilities.

Grease lubricates most efficiently within the listed temperature range.

Lithium Thickener—Grease with lithium thickener offers good heat resistance.

2 NLGI Grade—NLGI 2 is about the consistency of peanut butter.

Mineral Oil Base—Mineral-oil-based grease, derived from petroleum, is usually more economical than synthetic-oil-based grease.

Boron Nitride Additive—Grease with boron nitride cures to a semi-dry film that resists corrosion from salt water and won’t wash off.

Melting Temperature—Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.

				Container		Temp., ° F				Each		Package
	NLGI Consistency Grade	Base Oil	Additive	Net Wt., oz.	Type	Min.	Max.	Melting Temp., ° F	Color		Each	Pkg. Qty.		Pkg.
DuPont® Pro Grease White Lithium Premium—Lithium Thickener



		2	Mineral Oil	Boron Nitride	10	Aerosol Can	-10	350	500	White	8708T165	000000	6	8708T338	000000

Dry-Film Lubricants

Aerosol

Can

These lubricants go on wet for easy application. Once dry, they form a nonstick film that won't attract dust. Use them for general purpose lubricating in most applications.

Flip-Up Straw—Aerosol can with a flip-up straw has a straw that’s attached to the nozzle, so it won’t get lost. Raise it for precision dispensing; lower it for storage or to dispense as a spray.

Boron Nitride Additive—Lubricants with boron nitride resist corrosion from salt water and won’t wash off.

Cannot Be Sold Outside United States—Lubricants that cannot be sold outside the United States are restricted by product labeling requirements.

	Container						Each		Package
	Net Wt., oz.	Type	Container Features	Additive	Temp., ° F	Cannot Be Sold To		Each	Pkg. Qty.		Pkg.
DuPont® Non-Stick Dry-Film Lubricant



		14	Aerosol Can	—	Boron Nitride	-100 to 480	—	8710T838	000000	6	8710T867	000000


		WD-40 WD-40 Specialist Dry Lube



				10	Aerosol Can	Flip-Up Straw	—	-50 to 500	Outside United States	1163K47	00000	6	1163K48	00000

Penetrating Lubricants

Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants.

LPS


Aerosol Can

LPS Magnum—LPS Magnum is a wet film that provides maximum lubricity.

PTFE Additive—Lubricants with PTFE provide long-lasting lubrication.

Cannot Be Sold To—Lubricants that cannot be sold to the listed areas are restricted due to import regulations, product labeling requirements, or regulatory limits on VOCs (volatile organic compounds).

	Container			Temp., ° F			Each		Package
	Net Wt., oz.	Type	Additive	Min.	Max.	Cannot Be Sold To		Each	Pkg. Qty.		Pkg.
LPS Magnum



		11	Aerosol Can	PTFE	-50	450	Outside United States	1200K51	000000	12	1200K511	0000000

DuPont


Aerosol Can

DuPont® Silicone Lubricant—DuPont® Silicone Lubricant repels moisture and is nonstaining.

Silicone Rubber Additive—Lubricants with silicone rubber are clear, have excellent moisture resistance, and can be used on most rubber and plastic.

Boron Nitride Additive—Lubricants with boron nitride last long and cure to a semi-dry film that resists corrosion from salt water and won’t wash off.

	Container			Temp., ° F		Each		Package
	Net Wt., oz.	Type	Additive	Min.	Max.		Each	Pkg. Qty.		Pkg.
DuPont® Silicone Lubricant



		14	Aerosol Can	Silicone Rubber, Boron Nitride	-40	400	8710T703	000000	6	8710T74	000000

Tri-Flow


Aerosol Can	Spray Bottle

Tri-Flow cleans, lubricates, and protects, even in extreme temperatures.

PTFE Additive—Lubricants with PTFE provide long-lasting lubrication.

	Container				Temp., ° F			Each		Package
	Size, fl. oz.	Net Wt., oz.	Type	Additive	Min.	Max.	Food Industry Std.		Each	Pkg. Qty.		Pkg.
Tri-Flow Industrial



		—	12	Aerosol Can	PTFE	-60	475	NSF Registered H2	1202K21	000000	12	1202K213	0000000


		18	—	Spray Bottle	PTFE	-60	475	NSF Registered H2	1202K39	00000	6	1202K392	000000

Slick 50


Aerosol Can

Slick 50 OneLube—Slick 50 OneLube lubricates and protects metal-to-metal connections and is wear resistant.

PTFE Additive—Lubricants with PTFE provide long-lasting lubrication.

	Container			Temp., ° F			Each		Package
	Net Wt., oz.	Type	Additive	Min.	Max.	Cannot Be Sold To		Each	Pkg. Qty.		Pkg.
Slick 50 OneLube



		12	Aerosol Can	PTFE	-30	180	Canada	11785K11	00000	12	11785K112	000000

Food and Beverage Grease

Aerosol

Can

Use this grease in food-processing and preparation areas.

Grease lubricates most efficiently within the listed temperature range.

Aluminum Thickener—Grease with aluminum thickener has good moisture resistance and excellent oxidation resistance.

Silica Thickener—Grease with silica thickener has excellent heat and moisture resistance and good oxidation resistance.

2 NLGI Grade—NLGI 2 is about the consistency of peanut butter.

Mineral Oil Base—Mineral-oil-based grease, derived from petroleum, is usually more economical than synthetic-oil-based grease.

Synthetic Oil Base—Synthetic-oil-based grease lasts longer than mineral-oil-based grease and generally withstands a wider range of temperatures.

PTFE Additive—Grease with PTFE has small particles of PTFE that reduce friction and help the grease maintain its lubricity.

NSF Registered H1—Grease that is NSF Registered H1 is rated for incidental contact with food.

Melting Temperature—Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.

Cannot Be Sold To—Grease cannot be sold to the listed areas due to product regulations.

				Container		Temp., ° F						Each		Package
	NLGI Consistency Grade	Base Oil	Additive	Net Wt., oz.	Type	Min.	Max.	Melting Temp., ° F	Color	Food Industry Std.	Cannot Be Sold To		Each	Pkg. Qty.		Pkg.
Aluminum Thickener



		2	Mineral Oil	PTFE	13 1/2	Aerosol Can	15	350	500	White	NSF Registered H1	—	4328T69	000000	12	4328T71	0000000


		Silica Thickener



				2	Synthetic Oil	PTFE	11	Aerosol Can	-45	450	Not Rated	White	NSF Registered H1	California, New York	1378K32	00000	12	1378K322	000000

Long-Life Dry-Film Lubricants

Nano-sized additives fill small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. These lubricants dry to form a nonstick film that won’t attract dust. They are often used on hinges, gears, and roller chain.

Cannot Be Sold To—Lubricants cannot be sold to the listed areas due to product labeling requirements.

	Container					Each		Package
	Net Wt., oz.	Type	Additive	Temp., ° F	Cannot Be Sold To		Each	Pkg. Qty.		Pkg.
Lubricants



		11	Aerosol Can	Ceramic, PTFE	-30 to 570	Canada	2170N11	000000	6	2170N12	000000

Penetrating Lubricants for Chain

For use with roller chain and other moving metal parts, these thin lubricants cut through dirt, grease, and rust, withstand heavy loads, and resist wear.

Molybdenum Disulfide Additive— Lubricants with molybdenum disulfide withstand high loads and have excellent wear resistance.

PTFE Additive—Lubricants with PTFE provide long-lasting lubrication.

Boron Nitride Additive—Lubricants with boron nitride penetrate into roller chain links and pins while wet—below 120° F it acts as a dry lubricant that won’t attract dust or dirt; above 120° F it acts as a wet lubricant.

	Container				Each		Package
	Net Wt., oz.	Type	Additive	Temp. Range, ° F		Each	Pkg. Qty.		Pkg.
DuPont® Chain-Saver Wax-Based Lubricant



		14	Aerosol Can	Molybdenum Disulfide, Boron Nitride	-30 to 300	8710T774	000000	6	8710T816	000000


		Other Penetrating Lubricants



				11	Aerosol Can	PTFE	0 to 120	6159K78	0000	6	6159K79	00000

High-Pressure Food and Beverage Penetrating Lubricants

Formulated to handle high loads and temperatures, these lubricants are NSF registered H1 for incidental food contact. Use them with chain and gears in food-processing and preparation areas and with hinges on ovens. They cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment. Lubricants go on as a foam to cling to parts and resist dripping.

	Container					Each		Package
	Net Wt., oz.	Type	Additive	Temp. Range, ° F	Food Industry Std.		Each	Pkg. Qty.		Pkg.
Sprayon LU 205 Food Grade Chain



		15	Aerosol Can	PTFE	15 to 635	NSF Registered H1	2304N11	000000	12	2304N12	0000000

Food and Beverage Dry-Film Lubricants

Use these NSF registered H1 lubricants in food-processing and preparation areas with a risk of incidental food contact. They form a nonstick film that won't attract contaminants, such as flour.

PTFE Additive—Lubricants with PTFE have small particles of PTFE that fill in surface imperfections for excellent lubricity.

Cannot Be Sold To—Lubricants cannot be sold to the listed areas due to product regulations.

	Container						Each		Package
	Net Wt., oz.	Type	Additive	Temp., ° F	Food Industry Std.	Cannot Be Sold To		Each	Pkg. Qty.		Pkg.
Lubricants



		11	Aerosol Can	PTFE	-40 to 500	FDA Compliant 21 CFR 178.3570, NSF Registered H1	California, New York	1155K24	000000	12	1155K241	0000000

Long-Life Penetrating Lubricants

Nano-sized additives fill small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants. They go on as a foam to cling to parts and resist dripping.

Cannot Be Sold To—Lubricants cannot be sold to the listed areas due to product labeling requirements.

Container			Temp.			Each		Package
Net Wt., oz.	Type	Additive	Min.	Max., ° F	Cannot Be Sold To		Each	Pkg. Qty.		Pkg.
11	Aerosol Can	Ceramic-Reinforced PTFE	Not Rated	120	Canada	2193N11	000000	6	2193N12	000000

Overhead Door Dry-Film Lubricants

Spray these wear-resistant lubricants on rollers, hinges, and tracks of overhead doors to reduce friction and noise.

Silicone Rubber Additive—These silicone rubber lubricants repel water for use outdoors. Once dry, they form a thin lubricating layer that won’t rub off or attract dust.

	Container				Each		Package
	Net Wt., oz.	Type	Additive	Temp., ° F		Each	Pkg. Qty.		Pkg.
Lubricants



		9.3	Aerosol Can	Silicone Rubber	0 to 120	2297N11	00000	12	2297N12	000000

No-Residue Mold-Release Lubricants

Aerosol

Can

Also known as paintable mold-release lubricants, these lubricants don’t leave a residue, so you can paint or finish the molded part without the need to clean it. Apply them to molds before casting so you can easily remove cast parts and prevent sticking, stretching, and tearing.

PTFE Additive—Lubricants with PTFE create a long-lasting film that withstands high temperatures.

	Container			Temperature, ° F			Each		Package
	Net Weight, oz.	Type	Additive	Min.	Max.	For Use With		Each	Pkg. Qty.		Pkg.
Sprayon MR 311 Dry Film Release Agent



		12	Aerosol Can	PTFE	-50	575	Plastic, Rubber	1409K42	000000	12	1409K422	0000000


		Mold-Release Lubricant



				12	Aerosol Can	PTFE	Not Rated	500	Rubber	1409K72	00000	12	1409K721	000000

Dry-Film Lubricants for Chain

Aerosol

Can

A high load-carrying capacity makes these lubricants good for use on chain and moving metal parts. They dry to form a film that lubricates without attracting dust.

PTFE Additive—Lubricants with PTFE can be used with most plastics and are chemically inert.

	Container				Each		Package
	Net Wt., oz.	Type	Additive	Temp., ° F		Each	Pkg. Qty.		Pkg.
Sprayon LU 708 High Performance Dry-Film Lubricant



		10	Aerosol Can	PTFE	-40 to 570	1130K15	000000	12	1130K153	0000000